Decentrala/cantor
20
1
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Cantor mx (#25)

Browse Source 
* Swapped in Choc V2 switches, updated routing and outline
Removed redundant groundplane routing
Created double sided chocV2 footprint based on the kbd repo

* Updated readme.

* Added images

* Added images to Readme, fixed formatting

* Added gerbers

* Routing and edgecut cleanup, DRC error fixes

* Fixed drill layer misalingment and regenerated Gerbers

* Updated readme with pcb ordering instructions

* Added branding and rebuilt gerbers

* Moved Blackpill l closer to top edge to accomidate wide-lipped usb-c

* Revised footprint for better Cherry MX 3-pin support
Added teardrops
Revised GND zone params to allow islands
Removed unneeded island creating vias
wiring tweaks

* Adjusted footprint to include Gateron low profile, TTC low profile & cherry low-profile
Rebuilt teardrops
rebuilt ziones

* Fixed LH traces after footprint rework

* Updated readme

* Fixed MUR340 Hybrid footprint
Regenerated .dsn for autorouting

* Swapped in 'kitckitchen sink' switch footprints
Updated trrs jack
poke-yoke Blackpill masking

* Added jlcpcb order number silkscreen
updated version numbering

* Added speaker

* Moved piezo knockout below blackpill

* Modified Choc V2 3rd pin solder pads

* Moved ChocV2 3rd pin, made hotswop pads larger

* Updated choc v2 footprint to match kbd by foostan

* Updated branding, readme, and fixed drc breaks
THIS VERSION WAS SENT OUT FOR PRODUCTION

* Added upcharge notes from test run

* Added breakoff pinky cluster

* Updated breakoff pinky to not cut into hotswop pads

* Fixed broken keys with isolated ground planes
Moved footprints into repo
Connected some ground pins on switch footrpint
Updated docs with broken key notes

* Updated switch footrpints

* Footprint tweaks

* Added updated pic for v1.4

* Fixed choc 2nd min misalingment
Revised 'everything' footprint:
combined red-dragon and MX hole
removed organic masks in leiu of exotic annular rings
fixed malformed edge shapes

* Updated docs and fixed footprint mask

* Footprint cleanup
reverted branding to older MX specific style

* Fixed trrs footprint
added key numbering
cleaned up wiring between blackpill holes

* Removed speaker

* Sent this version out for production test (v1.5)

* Updated readme notes

* Added tentin puck

* Trace cleanup

* Updated trrs silks, bumped font size

* Consolidated cantor mx only footprints
Removed masterkey footprint library
Removed text from tenting puck footprint

* v1.5 tested successfuly

* Checkpoint commit

* Cleanup for PR

* Added gerber zip and Notes

* Updated honey-do

* Ignore cantore mx backup subdirectory

* Ignore Cantor MX backup subdirectory

* Exclude Cantor Classic KiCad backups from git

* Corner radius doubled next to TRRS jack

* Removed pinky snap-off ditch nubs

* Break-out point thickness increased
Thicker breakout points allowed for removal of GND traces on pinky column
Regenerated teardrops and planes

* Rounded corners using plugin
Fixed tiny-chunk traces that were preventing corner rounding
Regenerated tear drops
Regenerated zones
Updated versioning from 1.51 to 1.6

* Fixed malformed rounded corner trace
Regenerated Gerbers
Updated branding URL

* Udated trace connection for switch 11

* Revised branding/attribution

* Fixed rounded trace corner under MCU

* Regenerated Gerbers
Removed small ground zone island
Added vias to connect large GND zone islands
Fixed unrounded traces
Udated branding and attribution

* Pulled in changes from main, reverted readme

* Removed duplicate GND zone on front
Removed unused GND zone front/back vias
Fixed malformed trace on pin 4

* Moved front traces under MCU to back
Minor trace cleanup

* Dialed in teardrops
Moved most horizontal traces under MCU to back
Backside silk logo tweak
Updated drawing sheets attributions and versions
Regenerated Gerbers

* Fixed gerber mystery trace bug
Ran 'Cleanup track and vias' and it wiped out the mystery trace
Also reset origin points
regenrated Gerbers & zips

* Added note to BOM about tenting pucks
fixed readme spelling error
removed Cantor MX backups
This commit is contained in:
Ryan Neff
2023-11-05 11:48:06 -08:00
committed by GitHub
parent 494421a2b2
commit 91b40f613f
373 changed files with 192833 additions and 10 deletions
Download Patch File Download Diff File Expand all files Collapse all files

20
Cantor_Classic/libraries/kbd_footprints.pretty/4P4C.kicad_mod Normal file
View File

@@ -0,0 +1,20 @@
(module 4P4C (layer F.Cu) (tedit 573A6B12)
(descr http://www.assmann.us/specs/A-2004-3-4-LP-N-R_REV00.pdf)
(tags "4P4C, RJ")
(fp_text reference REF** (at 0 3.8) (layer F.SilkS)
(effects (font (size 1.5 1.5) (thickness 0.15)))
)
(fp_text value 4P4C (at 0 6.45) (layer F.Fab)
(effects (font (size 1.5 1.5) (thickness 0.15)))
)
(fp_line (start -5.59 7.85) (end 5.61 7.85) (layer F.SilkS) (width 0.15))
(fp_line (start 5.6 7.85) (end 5.6 -10.15) (layer F.SilkS) (width 0.15))
(fp_line (start 5.6 -10.15) (end -5.6 -10.15) (layer F.SilkS) (width 0.15))
(fp_line (start -5.6 -10.15) (end -5.6 7.85) (layer F.SilkS) (width 0.15))
(pad 5 thru_hole circle (at -3.81 0) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask F.SilkS))
(pad 6 thru_hole circle (at 3.81 0) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask F.SilkS))
(pad 1 thru_hole circle (at -1.9 -6.35) (size 1.5 1.5) (drill 0.9) (layers *.Cu *.Mask F.SilkS))
(pad 2 thru_hole circle (at -0.63 -8.89) (size 1.5 1.5) (drill 0.9) (layers *.Cu *.Mask F.SilkS))
(pad 4 thru_hole circle (at 1.91 -8.89) (size 1.5 1.5) (drill 0.9) (layers *.Cu *.Mask F.SilkS))
(pad 3 thru_hole circle (at 0.64 -6.35) (size 1.5 1.5) (drill 0.9) (layers *.Cu *.Mask F.SilkS))
)

20
Cantor_Classic/libraries/kbd_footprints.pretty/ALPS_PLATE_SPRING.kicad_mod Normal file
View File

@@ -0,0 +1,20 @@
(module keyboard_parts:ALPS_PLATE (layer F.Cu) (tedit 59475B7C)
(descr http://deskthority.net/wiki/File:Alps_Electric_--_spec_--_5454_31.pdf)
(tags "ALPS, keyboard switch, SKCM, SKCL")
(fp_text reference SW29 (at 0 0) (layer B.SilkS)
(effects (font (size 1.5 1.5) (thickness 0.2)) (justify mirror))
)
(fp_text value SW_PUSH (at 0 10.795) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -9.525 -9.525) (end -9.525 9.525) (layer F.SilkS) (width 0.15))
(fp_line (start -9.525 9.525) (end 9.525 9.525) (layer F.SilkS) (width 0.15))
(fp_line (start 9.525 9.525) (end 9.525 -9.525) (layer F.SilkS) (width 0.15))
(fp_line (start 9.525 -9.525) (end -9.525 -9.525) (layer F.SilkS) (width 0.15))
(pad "" np_thru_hole circle (at 0 6.624988 90) (size 2.54 2.54) (drill 2.54) (layers *.Cu))
(pad 3 thru_hole circle (at 5.75 5.999988 90) (size 2.5 2.5) (drill 1.5) (layers *.Cu *.Mask F.SilkS))
(pad 3 thru_hole circle (at 5.75 -5.999988 90) (size 2.5 2.5) (drill 1.5) (layers *.Cu *.Mask F.SilkS))
(pad 1 thru_hole circle (at -5.75 2.5 90) (size 2.5 2.5) (drill 1.5) (layers *.Cu *.Mask F.SilkS))
(pad 2 thru_hole circle (at -5.75 -2.5 90) (size 2.5 2.5) (drill 1.5) (layers *.Cu *.Mask F.SilkS))
(pad "" np_thru_hole circle (at 0 -6.624988 90) (size 2.54 2.54) (drill 2.54) (layers *.Cu))
)

12
Cantor_Classic/libraries/kbd_footprints.pretty/ALPS_PLATE_SPRING_CUTOUT.kicad_mod Normal file
View File

@@ -0,0 +1,12 @@
(module ALPS_PLATE_SPRING_CUTOUT (layer F.Cu) (tedit 59548634)
(fp_text reference REF** (at 0.01 8.95) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value ALPS_PLATE_SPRING_CUTOUT (at 0.01 -8.8) (layer F.Fab) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 8.05 8.05) (end 8.05 -8.05) (layer F.Fab) (width 0.15))
(fp_line (start -8.05 8.05) (end 8.05 8.05) (layer F.Fab) (width 0.15))
(fp_line (start -8.05 -8.05) (end -8.05 8.05) (layer F.Fab) (width 0.15))
(fp_line (start 8.05 -8.05) (end -8.05 -8.05) (layer F.Fab) (width 0.15))
)

20
Cantor_Classic/libraries/kbd_footprints.pretty/ALPS_SKCM.kicad_mod Normal file
View File

@@ -0,0 +1,20 @@
(module ALPS_SKCM (layer F.Cu) (tedit 57C14DA6)
(descr http://deskthority.net/wiki/File:Alps_Electric_--_spec_--_5454_31.pdf)
(tags "ALPS, keyboard switch, SKCM, SKCL")
(fp_text reference K** (at 0 0) (layer B.SilkS)
(effects (font (size 1.5 1.5) (thickness 0.2)) (justify mirror))
)
(fp_text value ALPS_SKCM (at 0 2) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 9.525 9.525) (end 9.525 -9.525) (layer Dwgs.User) (width 0.15))
(fp_line (start -9.525 9.525) (end 9.525 9.525) (layer Dwgs.User) (width 0.15))
(fp_line (start -9.525 -9.525) (end 9.525 -9.525) (layer Dwgs.User) (width 0.15))
(fp_line (start -9.525 9.525) (end -9.525 -9.525) (layer Dwgs.User) (width 0.15))
(fp_line (start -7.75 -6.4) (end -7.75 6.4) (layer F.SilkS) (width 0.15))
(fp_line (start 7.75 -6.4) (end 7.75 6.4) (layer F.SilkS) (width 0.15))
(fp_line (start -7.75 6.4) (end 7.75 6.4) (layer F.SilkS) (width 0.15))
(fp_line (start -7.75 -6.4) (end 7.75 -6.4) (layer F.SilkS) (width 0.15))
(pad 1 thru_hole circle (at -2.5 -4) (size 2.5 2.5) (drill 1.5) (layers *.Cu *.Mask F.SilkS))
(pad 2 thru_hole circle (at 2.5 -4.5) (size 2.5 2.5) (drill 1.5) (layers *.Cu *.Mask F.SilkS))
)

12
Cantor_Classic/libraries/kbd_footprints.pretty/ALPS_SKCM_CUTOUT.kicad_mod Normal file
View File

@@ -0,0 +1,12 @@
(module ALPS_SKCM_CUTOUT (layer F.Cu) (tedit 53DDA1BD)
(fp_text reference ALPS_SKCM_CUTOUT (at 0 1.5) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value VAL** (at 0 0) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 7.75 -6.4) (end -7.75 -6.4) (layer Edge.Cuts) (width 0.1))
(fp_line (start -7.75 -6.4) (end -7.75 6.4) (layer Edge.Cuts) (width 0.1))
(fp_line (start -7.75 6.4) (end 7.75 6.4) (layer Edge.Cuts) (width 0.1))
(fp_line (start 7.75 6.4) (end 7.75 -6.4) (layer Edge.Cuts) (width 0.1))
)

20
Cantor_Classic/libraries/kbd_footprints.pretty/ALPS_SKCM_CUTOUT_STAB256.kicad_mod Normal file
View File

@@ -0,0 +1,20 @@
(module ALPS_SKCM_CUTOUT_STAB256 (layer F.Cu) (tedit 5779E9B5)
(fp_text reference Cut** (at 0 1.5) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value ALSP_SKCM_CUTOUT_STAB256 (at 0 0) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -12.8 3.9) (end -12.8 9) (layer Edge.Cuts) (width 0.1))
(fp_line (start -12.8 9) (end -15.4 9) (layer Edge.Cuts) (width 0.1))
(fp_line (start -15.4 9) (end -15.4 3.9) (layer Edge.Cuts) (width 0.1))
(fp_line (start -15.4 3.9) (end -12.8 3.9) (layer Edge.Cuts) (width 0.1))
(fp_line (start 12.8 3.9) (end 12.8 9) (layer Edge.Cuts) (width 0.1))
(fp_line (start 12.8 9) (end 15.4 9) (layer Edge.Cuts) (width 0.1))
(fp_line (start 15.4 9) (end 15.4 3.9) (layer Edge.Cuts) (width 0.1))
(fp_line (start 15.4 3.9) (end 12.8 3.9) (layer Edge.Cuts) (width 0.1))
(fp_line (start 7.75 -6.4) (end -7.75 -6.4) (layer Edge.Cuts) (width 0.1))
(fp_line (start -7.75 -6.4) (end -7.75 6.4) (layer Edge.Cuts) (width 0.1))
(fp_line (start -7.75 6.4) (end 7.75 6.4) (layer Edge.Cuts) (width 0.1))
(fp_line (start 7.75 6.4) (end 7.75 -6.4) (layer Edge.Cuts) (width 0.1))
)

20
Cantor_Classic/libraries/kbd_footprints.pretty/ALPS_SKCM_CUTOUT_STAB406.kicad_mod Normal file
View File

@@ -0,0 +1,20 @@
(module ALPS_SKCM_CUTOUT_STAB406 (layer F.Cu) (tedit 5779EEF3)
(fp_text reference Cut** (at 0 1.5) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value ALSP_SKCM_CUTOUT_STAB406 (at 0 0) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -20.3 3.9) (end -20.3 9) (layer Edge.Cuts) (width 0.1))
(fp_line (start -20.3 9) (end -22.9 9) (layer Edge.Cuts) (width 0.1))
(fp_line (start -22.9 9) (end -22.9 3.9) (layer Edge.Cuts) (width 0.1))
(fp_line (start -22.9 3.9) (end -20.3 3.9) (layer Edge.Cuts) (width 0.1))
(fp_line (start 20.3 3.9) (end 20.3 9) (layer Edge.Cuts) (width 0.1))
(fp_line (start 20.3 9) (end 22.9 9) (layer Edge.Cuts) (width 0.1))
(fp_line (start 22.9 9) (end 22.9 3.9) (layer Edge.Cuts) (width 0.1))
(fp_line (start 22.9 3.9) (end 20.3 3.9) (layer Edge.Cuts) (width 0.1))
(fp_line (start 7.75 -6.4) (end -7.75 -6.4) (layer Edge.Cuts) (width 0.1))
(fp_line (start -7.75 -6.4) (end -7.75 6.4) (layer Edge.Cuts) (width 0.1))
(fp_line (start -7.75 6.4) (end 7.75 6.4) (layer Edge.Cuts) (width 0.1))
(fp_line (start 7.75 6.4) (end 7.75 -6.4) (layer Edge.Cuts) (width 0.1))
)

29
Cantor_Classic/libraries/kbd_footprints.pretty/ALPS_SKCM_CUTOUT_STAB883.kicad_mod Normal file
View File

@@ -0,0 +1,29 @@
(module ALPS_SKCM_CUTOUT_STAB883 (layer F.Cu) (tedit 577C2A6C)
(fp_text reference Cut** (at 0 1.5) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value ALSP_SKCM_CUTOUT_STAB883 (at 0 0) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -42.85 -1.2) (end -42.85 1.2) (layer Edge.Cuts) (width 0.1))
(fp_line (start -42.85 1.2) (end -45.25 1.2) (layer Edge.Cuts) (width 0.1))
(fp_line (start -45.25 1.2) (end -45.25 -1.2) (layer Edge.Cuts) (width 0.1))
(fp_line (start -45.25 -1.2) (end -42.85 -1.2) (layer Edge.Cuts) (width 0.1))
(fp_line (start -30.75 -1.2) (end -30.75 1.2) (layer Edge.Cuts) (width 0.1))
(fp_line (start -30.75 1.2) (end -33.15 1.2) (layer Edge.Cuts) (width 0.1))
(fp_line (start -33.15 1.2) (end -33.15 -1.2) (layer Edge.Cuts) (width 0.1))
(fp_line (start -33.15 -1.2) (end -30.75 -1.2) (layer Edge.Cuts) (width 0.1))
(fp_circle (center -38 0) (end -38 -3.15) (layer Edge.Cuts) (width 0.1))
(fp_line (start -44.15 3.9) (end -44.15 9) (layer Edge.Cuts) (width 0.1))
(fp_line (start -44.15 9) (end -46.75 9) (layer Edge.Cuts) (width 0.1))
(fp_line (start -46.75 9) (end -46.75 3.9) (layer Edge.Cuts) (width 0.1))
(fp_line (start -46.75 3.9) (end -44.15 3.9) (layer Edge.Cuts) (width 0.1))
(fp_line (start 44.15 3.9) (end 44.15 9) (layer Edge.Cuts) (width 0.1))
(fp_line (start 44.15 9) (end 46.75 9) (layer Edge.Cuts) (width 0.1))
(fp_line (start 46.75 9) (end 46.75 3.9) (layer Edge.Cuts) (width 0.1))
(fp_line (start 46.75 3.9) (end 44.15 3.9) (layer Edge.Cuts) (width 0.1))
(fp_line (start 7.75 -6.4) (end -7.75 -6.4) (layer Edge.Cuts) (width 0.1))
(fp_line (start -7.75 -6.4) (end -7.75 6.4) (layer Edge.Cuts) (width 0.1))
(fp_line (start -7.75 6.4) (end 7.75 6.4) (layer Edge.Cuts) (width 0.1))
(fp_line (start 7.75 6.4) (end 7.75 -6.4) (layer Edge.Cuts) (width 0.1))
)

22
Cantor_Classic/libraries/kbd_footprints.pretty/ALPS_SKCM_LED.kicad_mod Normal file
View File

@@ -0,0 +1,22 @@
(module ALPS_SKCM_LED (layer F.Cu) (tedit 5807175D)
(descr http://deskthority.net/wiki/File:Alps_Electric_--_spec_--_5454_31.pdf)
(tags "ALPS, keyboard switch, SKCM, SKCL")
(fp_text reference K** (at 0 0) (layer B.SilkS)
(effects (font (size 1.5 1.5) (thickness 0.2)) (justify mirror))
)
(fp_text value ALPS_SKCM_LED (at 0 2) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 9.525 9.525) (end 9.525 -9.525) (layer Dwgs.User) (width 0.15))
(fp_line (start -9.525 9.525) (end 9.525 9.525) (layer Dwgs.User) (width 0.15))
(fp_line (start -9.525 -9.525) (end 9.525 -9.525) (layer Dwgs.User) (width 0.15))
(fp_line (start -9.525 9.525) (end -9.525 -9.525) (layer Dwgs.User) (width 0.15))
(fp_line (start -7.75 -6.4) (end -7.75 6.4) (layer F.SilkS) (width 0.15))
(fp_line (start 7.75 -6.4) (end 7.75 6.4) (layer F.SilkS) (width 0.15))
(fp_line (start -7.75 6.4) (end 7.75 6.4) (layer F.SilkS) (width 0.15))
(fp_line (start -7.75 -6.4) (end 7.75 -6.4) (layer F.SilkS) (width 0.15))
(pad 1 thru_hole circle (at -2.5 -4) (size 2.5 2.5) (drill 1.5) (layers *.Cu *.Mask F.SilkS))
(pad 2 thru_hole circle (at 2.5 -4.5) (size 2.5 2.5) (drill 1.5) (layers *.Cu *.Mask))
(pad 3 thru_hole rect (at -1.27 4.5) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask))
(pad 4 thru_hole circle (at 1.27 4.5) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask))
)

20
Cantor_Classic/libraries/kbd_footprints.pretty/ALPS_SKCM_reverse_pad.kicad_mod Normal file
View File

@@ -0,0 +1,20 @@
(module ALPS_SKCM_reverse_pad (layer F.Cu) (tedit 57C14EBE)
(descr http://deskthority.net/wiki/File:Alps_Electric_--_spec_--_5454_31.pdf)
(tags "ALPS, keyboard switch, SKCM, SKCL")
(fp_text reference K** (at 0 0) (layer B.SilkS)
(effects (font (size 1.5 1.5) (thickness 0.2)) (justify mirror))
)
(fp_text value ALPS_SKCM (at 0 2) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 9.525 9.525) (end 9.525 -9.525) (layer Dwgs.User) (width 0.15))
(fp_line (start -9.525 9.525) (end 9.525 9.525) (layer Dwgs.User) (width 0.15))
(fp_line (start -9.525 -9.525) (end 9.525 -9.525) (layer Dwgs.User) (width 0.15))
(fp_line (start -9.525 9.525) (end -9.525 -9.525) (layer Dwgs.User) (width 0.15))
(fp_line (start -7.75 -6.4) (end -7.75 6.4) (layer F.SilkS) (width 0.15))
(fp_line (start 7.75 -6.4) (end 7.75 6.4) (layer F.SilkS) (width 0.15))
(fp_line (start -7.75 6.4) (end 7.75 6.4) (layer F.SilkS) (width 0.15))
(fp_line (start -7.75 -6.4) (end 7.75 -6.4) (layer F.SilkS) (width 0.15))
(pad 2 thru_hole circle (at -2.5 -4) (size 2.5 2.5) (drill 1.5) (layers *.Cu *.Mask F.SilkS))
(pad 1 thru_hole circle (at 2.5 -4.5) (size 2.5 2.5) (drill 1.5) (layers *.Cu *.Mask F.SilkS))
)

28
Cantor_Classic/libraries/kbd_footprints.pretty/AVR_ICSP_3x2.kicad_mod Normal file
View File

@@ -0,0 +1,28 @@
(module AVR_ICSP_3x2 (layer F.Cu) (tedit 5485620F)
(descr "Double rangee de contacts 2 x 4 pins")
(tags CONN)
(fp_text reference P15 (at 4.195 3.596) (layer F.SilkS) hide
(effects (font (size 1.016 1.016) (thickness 0.2032)))
)
(fp_text value CONN_3X2 (at -0.06096 0.03048) (layer F.SilkS) hide
(effects (font (size 1.016 1.016) (thickness 0.2032)))
)
(fp_line (start -1.25 2.55) (end -1.25 3.35) (layer F.SilkS) (width 0.2))
(fp_line (start -1.25 3.35) (end 1.3 3.35) (layer F.SilkS) (width 0.2))
(fp_line (start 1.3 3.35) (end 1.3 2.55) (layer F.SilkS) (width 0.2))
(fp_line (start 3.81 2.54) (end -3.81 2.54) (layer F.SilkS) (width 0.2032))
(fp_line (start -3.81 -2.54) (end 3.81 -2.54) (layer F.SilkS) (width 0.2032))
(fp_line (start 3.81 -2.54) (end 3.81 2.54) (layer F.SilkS) (width 0.2032))
(fp_line (start -3.81 2.54) (end -3.81 -2.54) (layer F.SilkS) (width 0.2032))
(pad 1 thru_hole rect (at -2.54 1.27) (size 1.7 1.7) (drill 1.016) (layers *.Cu *.Mask F.SilkS))
(pad 2 thru_hole circle (at -2.54 -1.27) (size 1.7 1.7) (drill 1.016) (layers *.Cu *.Mask F.SilkS))
(pad 3 thru_hole circle (at 0 1.27) (size 1.7 1.7) (drill 1.016) (layers *.Cu *.Mask F.SilkS))
(pad 4 thru_hole circle (at 0 -1.27) (size 1.7 1.7) (drill 1.016) (layers *.Cu *.Mask F.SilkS))
(pad 5 thru_hole circle (at 2.54 1.27) (size 1.7 1.7) (drill 1.016) (layers *.Cu *.Mask F.SilkS))
(pad 6 thru_hole circle (at 2.54 -1.27) (size 1.7 1.7) (drill 1.016) (layers *.Cu *.Mask F.SilkS))
(model pin_array/pins_array_3x2.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)

23
Cantor_Classic/libraries/kbd_footprints.pretty/C_1608.kicad_mod Normal file
View File

@@ -0,0 +1,23 @@
(module C_1608 (layer F.Cu)
(descr "SMT, 1608, 0603")
(tags "SMT, 1608, 0603")
(fp_text reference C2 (at 0 -1.45) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value 1u (at 0 1.45) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start -1.65 -0.8) (end 1.65 -0.8) (layer F.SilkS) (width 0.2))
(fp_line (start 1.65 -0.8) (end 1.65 0.8) (layer F.SilkS) (width 0.2))
(fp_line (start 1.65 0.8) (end -1.65 0.8) (layer F.SilkS) (width 0.2))
(fp_line (start -1.65 0.8) (end -1.65 -0.8) (layer F.SilkS) (width 0.2))
(pad 2 smd rect (at 0.85 0) (size 1.1 1.1) (layers F.Cu F.Paste F.Mask)
(clearance 0.1))
(pad 1 smd rect (at -0.85 0) (size 1.1 1.1) (layers F.Cu F.Paste F.Mask)
(clearance 0.1))
(model smd/capacitors/c_0603.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)

23
Cantor_Classic/libraries/kbd_footprints.pretty/C_1608_rev2.kicad_mod Normal file
View File

@@ -0,0 +1,23 @@
(module keyboard_parts:C_1608_rev2 (layer F.Cu) (tedit 5B78D9AF)
(descr "SMT, 1608, 0603")
(tags "SMT, 1608, 0603")
(fp_text reference REF** (at 0 -1.4) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value C_1608_rev2 (at 0 1.475) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start -1.65 -0.8) (end 1.65 -0.8) (layer F.SilkS) (width 0.2))
(fp_line (start 1.65 -0.8) (end 1.65 0.8) (layer F.SilkS) (width 0.2))
(fp_line (start 1.65 0.8) (end -1.65 0.8) (layer F.SilkS) (width 0.2))
(fp_line (start -1.65 0.8) (end -1.65 -0.8) (layer F.SilkS) (width 0.2))
(pad 2 smd roundrect (at 0.85 0) (size 1 0.8) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(clearance 0.1))
(pad 1 smd roundrect (at -0.85 0) (size 1 0.8) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(clearance 0.1))
(model smd/capacitors/c_0603.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)

22
Cantor_Classic/libraries/kbd_footprints.pretty/C_3216.kicad_mod Normal file
View File

@@ -0,0 +1,22 @@
(module C_3216 (layer F.Cu) (tedit 5486077C)
(descr "SMD, 3216, 1210, C")
(tags "SMD, 3216, 1210, C")
(attr smd)
(fp_text reference C_3216 (at 0 -2.1) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value C*** (at 0 2.1) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start -2.75 -1.35) (end 2.75 -1.35) (layer F.SilkS) (width 0.2))
(fp_line (start 2.75 1.375) (end -2.75 1.375) (layer F.SilkS) (width 0.2))
(fp_line (start 2.75 1.375) (end 2.75 -1.325) (layer F.SilkS) (width 0.2))
(fp_line (start -2.75 -1.35) (end -2.75 1.375) (layer F.SilkS) (width 0.2))
(pad 1 smd rect (at -1.5 0) (size 1.8 2) (layers F.Cu F.Paste F.Mask))
(pad 2 smd rect (at 1.5 0) (size 1.8 2) (layers F.Cu F.Paste F.Mask))
(model smd/chip_cms_pol.wrl
(at (xyz 0 0 0))
(scale (xyz 0.1700000017881393 0.1599999964237213 0.1599999964237213))
(rotate (xyz 0 0 0))
)
)

22
Cantor_Classic/libraries/kbd_footprints.pretty/C_3216_rev2.kicad_mod Normal file
View File

@@ -0,0 +1,22 @@
(module keyboard_parts:C_3216_rev2 (layer F.Cu) (tedit 5B78E437)
(descr "SMD, 3216, 1210, C")
(tags "SMD, 3216, 1210, C")
(attr smd)
(fp_text reference C_3216 (at 0 -2.1) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value REF** (at 0 2.1) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start -2.75 -1.35) (end 2.75 -1.35) (layer F.SilkS) (width 0.2))
(fp_line (start 2.75 1.375) (end -2.75 1.375) (layer F.SilkS) (width 0.2))
(fp_line (start 2.75 1.375) (end 2.75 -1.325) (layer F.SilkS) (width 0.2))
(fp_line (start -2.75 -1.35) (end -2.75 1.375) (layer F.SilkS) (width 0.2))
(pad 1 smd roundrect (at -1.5 0) (size 1.2 1.7) (drill (offset -0.1 0)) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25))
(pad 2 smd roundrect (at 1.5 0) (size 1.2 1.7) (drill (offset 0.1 0)) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25))
(model smd/chip_cms_pol.wrl
(at (xyz 0 0 0))
(scale (xyz 0.1700000017881393 0.1599999964237213 0.1599999964237213))
(rotate (xyz 0 0 0))
)
)

22
Cantor_Classic/libraries/kbd_footprints.pretty/C_3225.kicad_mod Normal file
View File

@@ -0,0 +1,22 @@
(module C_3225 (layer F.Cu) (tedit 5486079A)
(descr "SMD, 3216, 1210, C")
(tags "SMD, 3216, 1210, C")
(attr smd)
(fp_text reference C_3225 (at 0.05 -3.05) (layer F.SilkS) hide
(effects (font (size 0.762 0.762) (thickness 0.127)))
)
(fp_text value C*** (at 0 2.85) (layer F.SilkS)
(effects (font (size 0.6 0.6) (thickness 0.15)))
)
(fp_line (start -2.8 -1.9) (end -2.8 1.925) (layer F.SilkS) (width 0.2))
(fp_line (start -2.8 1.925) (end 2.8 1.925) (layer F.SilkS) (width 0.2))
(fp_line (start 2.8 1.925) (end 2.8 -1.9) (layer F.SilkS) (width 0.2))
(fp_line (start 2.8 -1.9) (end -2.8 -1.9) (layer F.SilkS) (width 0.2))
(pad 1 smd rect (at -1.5 0) (size 1.8 3) (layers F.Cu F.Paste F.Mask))
(pad 2 smd rect (at 1.5 0) (size 1.8 3) (layers F.Cu F.Paste F.Mask))
(model smd/chip_cms_pol.wrl
(at (xyz 0 0 0))
(scale (xyz 0.1700000017881393 0.1599999964237213 0.1599999964237213))
(rotate (xyz 0 0 0))
)
)

22
Cantor_Classic/libraries/kbd_footprints.pretty/C_3528.kicad_mod Normal file
View File

@@ -0,0 +1,22 @@
(module C_3528 (layer F.Cu) (tedit 5485DF60)
(descr "SMD, 3216, 1210, C")
(tags "SMD, 3216, 1210, C")
(attr smd)
(fp_text reference C_3528 (at 0.05 -3.05) (layer F.SilkS) hide
(effects (font (size 0.762 0.762) (thickness 0.127)))
)
(fp_text value C*** (at 0 2.85) (layer F.SilkS)
(effects (font (size 0.6 0.6) (thickness 0.15)))
)
(fp_line (start 2.95 -1.9) (end 2.95 1.875) (layer F.SilkS) (width 0.2))
(fp_line (start 2.95 1.875) (end -2.95 1.875) (layer F.SilkS) (width 0.2))
(fp_line (start -2.95 1.875) (end -2.95 -1.9) (layer F.SilkS) (width 0.2))
(fp_line (start -2.95 -1.9) (end 2.95 -1.9) (layer F.SilkS) (width 0.2))
(pad 1 smd rect (at -1.65 0) (size 1.8 3) (layers F.Cu F.Paste F.Mask))
(pad 2 smd rect (at 1.65 0) (size 1.8 3) (layers F.Cu F.Paste F.Mask))
(model smd/chip_cms_pol.wrl
(at (xyz 0 0 0))
(scale (xyz 0.1700000017881393 0.1599999964237213 0.1599999964237213))
(rotate (xyz 0 0 0))
)
)

24
Cantor_Classic/libraries/kbd_footprints.pretty/C_3528_pol.kicad_mod Normal file
View File

@@ -0,0 +1,24 @@
(module C_3528_pol (layer F.Cu) (tedit 57C0FEA3)
(descr "SMD, 3216, 1210, C")
(tags "SMD, 3216, 1210, C")
(attr smd)
(fp_text reference C_3528_pol (at -4 0 90) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value Val** (at -0.05 0 90) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start -3.3 1.9) (end -3.3 -1.9) (layer F.SilkS) (width 0.2))
(fp_line (start -3.1 1.9) (end -3.1 -1.9) (layer F.SilkS) (width 0.2))
(fp_line (start 2.95 -1.9) (end 2.95 1.9) (layer F.SilkS) (width 0.2))
(fp_line (start 2.95 1.9) (end -3.3 1.9) (layer F.SilkS) (width 0.2))
(fp_line (start -2.95 1.9) (end -2.95 -1.9) (layer F.SilkS) (width 0.2))
(fp_line (start -3.3 -1.9) (end 2.95 -1.9) (layer F.SilkS) (width 0.2))
(pad 1 smd rect (at -1.65 0) (size 1.8 3) (layers F.Cu F.Paste F.Mask))
(pad 2 smd rect (at 1.65 0) (size 1.8 3) (layers F.Cu F.Paste F.Mask))
(model smd/chip_cms_pol.wrl
(at (xyz 0 0 0))
(scale (xyz 0.1700000017881393 0.1599999964237213 0.1599999964237213))
(rotate (xyz 0 0 0))
)
)

22
Cantor_Classic/libraries/kbd_footprints.pretty/C_6032.kicad_mod Normal file
View File

@@ -0,0 +1,22 @@
(module C_6032 (layer F.Cu) (tedit 548607AF)
(descr "SMD, 3216, 1210, C")
(tags "SMD, 3216, 1210, C")
(attr smd)
(fp_text reference C_6032 (at 0.05 -3.05) (layer F.SilkS) hide
(effects (font (size 0.762 0.762) (thickness 0.127)))
)
(fp_text value C*** (at 0 2.85) (layer F.SilkS)
(effects (font (size 0.6 0.6) (thickness 0.15)))
)
(fp_line (start 4.5 -2.3) (end 4.5 2.3) (layer F.SilkS) (width 0.2))
(fp_line (start 4.5 2.3) (end -4.5 2.3) (layer F.SilkS) (width 0.2))
(fp_line (start -4.5 2.3) (end -4.5 -2.3) (layer F.SilkS) (width 0.2))
(fp_line (start -4.5 -2.3) (end 4.5 -2.3) (layer F.SilkS) (width 0.2))
(pad 1 smd rect (at -2.6 0) (size 2.8 3) (layers F.Cu F.Paste F.Mask))
(pad 2 smd rect (at 2.6 0) (size 2.8 3) (layers F.Cu F.Paste F.Mask))
(model smd/chip_cms_pol.wrl
(at (xyz 0 0 0))
(scale (xyz 0.1700000017881393 0.1599999964237213 0.1599999964237213))
(rotate (xyz 0 0 0))
)
)

19
Cantor_Classic/libraries/kbd_footprints.pretty/DSUB9P.kicad_mod Normal file
View File

@@ -0,0 +1,19 @@
(module DSUB9P (layer F.Cu) (tedit 57124C6E)
(fp_text reference CN** (at 0 5.8) (layer F.SilkS)
(effects (font (size 1.5 1.5) (thickness 0.15)))
)
(fp_text value DSUB9P (at -0.15 -8.75) (layer F.Fab)
(effects (font (size 1.5 1.5) (thickness 0.15)))
)
(pad 3 thru_hole circle (at 0 -1.42) (size 1.4 1.4) (drill 0.9) (layers *.Cu *.Mask F.SilkS))
(pad 8 thru_hole circle (at -1.385 1.42) (size 1.4 1.4) (drill 0.9) (layers *.Cu *.Mask F.SilkS))
(pad 7 thru_hole circle (at 1.385 1.42) (size 1.4 1.4) (drill 0.9) (layers *.Cu *.Mask F.SilkS))
(pad 6 thru_hole circle (at 4.155 1.42) (size 1.4 1.4) (drill 0.9) (layers *.Cu *.Mask F.SilkS))
(pad 9 thru_hole circle (at -4.155 1.42) (size 1.4 1.4) (drill 0.9) (layers *.Cu *.Mask F.SilkS))
(pad 2 thru_hole circle (at 2.77 -1.42) (size 1.4 1.4) (drill 0.9) (layers *.Cu *.Mask F.SilkS))
(pad 1 thru_hole circle (at 5.54 -1.42) (size 1.4 1.4) (drill 0.9) (layers *.Cu *.Mask F.SilkS))
(pad 4 thru_hole circle (at -2.77 -1.42) (size 1.4 1.4) (drill 0.9) (layers *.Cu *.Mask F.SilkS))
(pad 5 thru_hole circle (at -5.54 -1.42) (size 1.4 1.4) (drill 0.9) (layers *.Cu *.Mask F.SilkS))
(pad 10 thru_hole circle (at 12.5 0) (size 4.4 4.4) (drill 3.18) (layers *.Cu *.Mask F.SilkS))
(pad 10 thru_hole circle (at -12.5 0) (size 4.4 4.4) (drill 3.18) (layers *.Cu *.Mask F.SilkS))
)

28
Cantor_Classic/libraries/kbd_footprints.pretty/D_SC79.kicad_mod Normal file
View File

@@ -0,0 +1,28 @@
(module D_SC79 (layer F.Cu) (tedit 561B69B8)
(descr "SMT, 1608, 0603")
(tags "SMT, 1608, 0603")
(fp_text reference D_SC79 (at 0 -1.8) (layer F.SilkS) hide
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value D*** (at 0.05 1.8) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start -2.05 -0.8) (end -2.05 0.8) (layer F.SilkS) (width 0.16))
(fp_line (start 1.25 -0.8) (end -1.15 -0.8) (layer F.SilkS) (width 0.16))
(fp_line (start -1.15 -0.8) (end -2.05 -0.8) (layer F.SilkS) (width 0.16))
(fp_line (start 1.75 -0.8) (end 1.75 0.8) (layer F.SilkS) (width 0.16))
(fp_line (start -2.05 0.8) (end 1.35 0.8) (layer F.SilkS) (width 0.16))
(fp_line (start 1.25 0.8) (end 1.75 0.8) (layer F.SilkS) (width 0.16))
(fp_line (start 1.25 -0.8) (end 1.75 -0.8) (layer F.SilkS) (width 0.16))
(fp_line (start -1.75 -0.8) (end -1.75 0.8) (layer F.SilkS) (width 0.16))
(fp_line (start -1.8 -0.8) (end -1.8 0.8) (layer F.SilkS) (width 0.16))
(fp_line (start -1.85 -0.8) (end -1.85 0.8) (layer F.SilkS) (width 0.16))
(fp_line (start -1.9 -0.8) (end -1.9 0.8) (layer F.SilkS) (width 0.16))
(pad 2 smd rect (at 0.85 0) (size 1 0.8) (layers F.Cu F.Paste F.Mask))
(pad 1 smd rect (at -0.85 0) (size 1 0.8) (layers F.Cu F.Paste F.Mask))
(model smd/capacitors/c_0603.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)

18
Cantor_Classic/libraries/kbd_footprints.pretty/D_SOD123.kicad_mod Normal file
View File

@@ -0,0 +1,18 @@
(module D_SOD123 (layer F.Cu) (tedit 561B69D3)
(attr smd)
(fp_text reference D_SOD123 (at 0 1.925) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value VAL** (at 0 -1.925) (layer F.SilkS) hide
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start -3.075 1.2) (end -3.075 -1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -2.8 -1.2) (end -2.8 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -2.925 -1.2) (end -2.925 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -3.2 -1.2) (end 2.8 -1.2) (layer F.SilkS) (width 0.2))
(fp_line (start 2.8 -1.2) (end 2.8 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start 2.8 1.2) (end -3.2 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -3.2 1.2) (end -3.2 -1.2) (layer F.SilkS) (width 0.2))
(pad 2 smd rect (at 1.7 0) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask))
(pad 1 smd rect (at -1.7 0) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask))
)

18
Cantor_Classic/libraries/kbd_footprints.pretty/D_SOD123W_hand.kicad_mod Normal file
View File

@@ -0,0 +1,18 @@
(module D_SOD123W_hand (layer F.Cu) (tedit 561B69E3)
(attr smd)
(fp_text reference D_SOD123 (at 0 1.925) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value VAL** (at 0 -1.925) (layer F.SilkS) hide
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start -3.075 1.2) (end -3.075 -1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -2.8 -1.2) (end -2.8 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -2.925 -1.2) (end -2.925 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -3.2 -1.2) (end 2.8 -1.2) (layer F.SilkS) (width 0.2))
(fp_line (start 2.8 -1.2) (end 2.8 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start 2.8 1.2) (end -3.2 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -3.2 1.2) (end -3.2 -1.2) (layer F.SilkS) (width 0.2))
(pad 2 smd rect (at 1.7 0) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask))
(pad 1 smd rect (at -1.7 0) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask))
)

26
Cantor_Classic/libraries/kbd_footprints.pretty/D_SOD123_axial.kicad_mod Normal file
View File

@@ -0,0 +1,26 @@
(module D_SOD123_axial (layer F.Cu) (tedit 561B6A12)
(attr smd)
(fp_text reference D** (at 0 1.925) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value D (at 0 -1.925) (layer F.SilkS) hide
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start -2.275 -1.2) (end -2.275 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -2.45 -1.2) (end -2.45 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -2.625 -1.2) (end -2.625 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -3.025 1.2) (end -3.025 -1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -2.8 -1.2) (end -2.8 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -2.925 -1.2) (end -2.925 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -3 -1.2) (end 2.8 -1.2) (layer F.SilkS) (width 0.2))
(fp_line (start 2.8 -1.2) (end 2.8 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start 2.8 1.2) (end -3 1.2) (layer F.SilkS) (width 0.2))
(pad 2 smd rect (at 1.575 0) (size 1.2 1.2) (layers F.Cu F.Paste F.Mask))
(pad 1 smd rect (at -1.575 0) (size 1.2 1.2) (layers F.Cu F.Paste F.Mask))
(pad 1 thru_hole rect (at -3.9 0) (size 1.6 1.6) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 2 thru_hole circle (at 3.9 0) (size 1.6 1.6) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 1 smd rect (at -2.7 0) (size 2.5 0.5) (layers F.Cu)
(solder_mask_margin -999))
(pad 2 smd rect (at 2.7 0) (size 2.5 0.5) (layers F.Cu)
(solder_mask_margin -999))
)

19
Cantor_Classic/libraries/kbd_footprints.pretty/D_SOD123_hand.kicad_mod Normal file
View File

@@ -0,0 +1,19 @@
(module D_SOD123_hand (layer F.Cu) (tedit 561B6A2C)
(attr smd)
(fp_text reference D** (at 0 1.925) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value D (at 0 -1.925) (layer F.SilkS) hide
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start -3.1 1.2) (end -3.1 -1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -3 1.2) (end -3 -1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -2.9 1.2) (end -2.9 -1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -2.7 1.2) (end -2.7 -1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -2.8 1.2) (end -2.8 -1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -3.1 -1.2) (end 2.8 -1.2) (layer F.SilkS) (width 0.2))
(fp_line (start 2.8 -1.2) (end 2.8 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start 2.8 1.2) (end -3.1 1.2) (layer F.SilkS) (width 0.2))
(pad 2 smd rect (at 1.575 0) (size 1.2 1.2) (layers F.Cu F.Paste F.Mask))
(pad 1 smd rect (at -1.575 0) (size 1.2 1.2) (layers F.Cu F.Paste F.Mask))
)

19
Cantor_Classic/libraries/kbd_footprints.pretty/D_axial.kicad_mod Normal file
View File

@@ -0,0 +1,19 @@
(module D_axial (layer F.Cu) (tedit 561B6A3D)
(fp_text reference D** (at 0 1.925) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value D (at 0 -1.925) (layer F.SilkS) hide
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start -2.075 -1.2) (end -2.075 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -2.175 -1.2) (end -2.175 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -2.275 -1.2) (end -2.275 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -2.45 -1.2) (end -2.45 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -2.625 -1.2) (end -2.625 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -2.8 -1.2) (end -2.8 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -2.8 -1.2) (end 2.8 -1.2) (layer F.SilkS) (width 0.2))
(fp_line (start 2.8 -1.2) (end 2.8 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start 2.8 1.2) (end -2.8 1.2) (layer F.SilkS) (width 0.2))
(pad 1 thru_hole rect (at -3.9 0) (size 1.6 1.6) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 2 thru_hole circle (at 3.9 0) (size 1.6 1.6) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
)

20
Cantor_Classic/libraries/kbd_footprints.pretty/FA-238.kicad_mod Normal file
View File

@@ -0,0 +1,20 @@
(module FA-238 (layer F.Cu) (tedit 5711E409)
(fp_text reference X** (at 0 2.55) (layer F.SilkS) hide
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value XTAL_FA238 (at 0 -2.625) (layer F.SilkS) hide
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start -2.375 1.875) (end -2.375 -1.875) (layer F.SilkS) (width 0.2))
(fp_line (start -2.375 -1.875) (end 2.375 -1.875) (layer F.SilkS) (width 0.2))
(fp_line (start 2.375 -1.875) (end 2.375 1.875) (layer F.SilkS) (width 0.2))
(fp_line (start 2.375 1.875) (end -2.375 1.875) (layer F.SilkS) (width 0.2))
(pad 3 smd rect (at -1.1 -0.8) (size 1.4 1.2) (drill (offset -0.1 -0.05)) (layers F.Cu F.Paste F.Mask)
(clearance 0.2))
(pad 2 smd rect (at 1.1 -0.8) (size 1.4 1.2) (drill (offset 0.1 -0.05)) (layers F.Cu F.Paste F.Mask)
(clearance 0.2))
(pad 1 smd rect (at -1.1 0.8) (size 1.4 1.2) (drill (offset -0.1 0.05)) (layers F.Cu F.Paste F.Mask)
(clearance 0.2))
(pad 3 smd rect (at 1.1 0.8) (size 1.4 1.2) (drill (offset 0.1 0.05)) (layers F.Cu F.Paste F.Mask)
(clearance 0.2))
)

14
Cantor_Classic/libraries/kbd_footprints.pretty/HC-49_SMT.kicad_mod Normal file
View File

@@ -0,0 +1,14 @@
(module 00Keyboard:HC-49_SMT (layer F.Cu)
(fp_text reference HC-49_SMT (at 0 -3.4) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value VAL** (at 0 3.4) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start -6 -2.4) (end 6 -2.4) (layer F.SilkS) (width 0.2))
(fp_line (start 6 -2.4) (end 6 2.4) (layer F.SilkS) (width 0.2))
(fp_line (start 6 2.4) (end -6 2.4) (layer F.SilkS) (width 0.2))
(fp_line (start -6 2.4) (end -6 -2.4) (layer F.SilkS) (width 0.2))
(pad 1 smd rect (at -4.75 0) (size 5.5 2) (layers F.Cu F.Paste F.Mask))
(pad 2 smd rect (at 4.75 0) (size 5.5 2) (layers F.Cu F.Paste F.Mask))
)

29
Cantor_Classic/libraries/kbd_footprints.pretty/HHKB_JP_HRS_DF14_15P.kicad_mod Normal file
View File

@@ -0,0 +1,29 @@
(module HHKB_JP_HRS_DF14_15P (layer F.Cu) (tedit 59086BE9)
(descr http://www.mouser.com/ds/2/185/e53800017-12550.pdf)
(tags "HHKB JP, HRS, Hirose, DF14, 15P")
(fp_text reference CN1 (at 9.3 -3) (layer F.SilkS) hide
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value JP (at 8.75 -2.1) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(pad "" np_thru_hole circle (at 20.1 -1.1) (size 1.1 1.1) (drill 1.1) (layers *.Cu *.Mask))
(pad "" np_thru_hole circle (at -2.6 -1.1) (size 1.1 1.1) (drill 1.1) (layers *.Cu *.Mask))
(pad 17 smd rect (at 19.9 -5.1) (size 2 2.6) (layers F.Cu F.Paste F.Mask))
(pad 7 smd rect (at 10 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 6 smd rect (at 11.25 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 4 smd rect (at 13.75 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 5 smd rect (at 12.5 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 1 smd rect (at 17.5 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 2 smd rect (at 16.25 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 3 smd rect (at 15 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 11 smd rect (at 5 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 10 smd rect (at 6.25 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 8 smd rect (at 8.75 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 9 smd rect (at 7.5 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 13 smd rect (at 2.5 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 12 smd rect (at 3.75 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 14 smd rect (at 1.25 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 15 smd rect (at 0 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 16 smd rect (at -2.4 -5.1) (size 2 2.6) (layers F.Cu F.Paste F.Mask))
)

26
Cantor_Classic/libraries/kbd_footprints.pretty/HHKB_PRO2_ZH13.kicad_mod Normal file
View File

@@ -0,0 +1,26 @@
(module HHKB_PRO2_ZH13 (layer F.Cu) (tedit 5485C3B3)
(descr http://www.jst-mfg.com/product/pdf/eng/eZH.pdf)
(tags "HHKB pro2, JST, ZH")
(fp_text reference HHKB_PRO2_ZH13 (at 9 3.7) (layer F.SilkS) hide
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value VAL** (at 9.025 3.725) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start -2 5.5) (end 20 5.5) (layer F.SilkS) (width 0.2))
(pad 1 smd rect (at 0 0 180) (size 0.7 2.6) (layers F.Cu F.Paste F.Mask))
(pad 2 smd rect (at 1.5 0 180) (size 0.7 2.6) (layers F.Cu F.Paste F.Mask))
(pad 3 smd rect (at 3 0 180) (size 0.7 2.6) (layers F.Cu F.Paste F.Mask))
(pad 4 smd rect (at 4.5 0 180) (size 0.7 2.6) (layers F.Cu F.Paste F.Mask))
(pad 5 smd rect (at 6 0 180) (size 0.7 2.6) (layers F.Cu F.Paste F.Mask))
(pad 6 smd rect (at 7.5 0 180) (size 0.7 2.6) (layers F.Cu F.Paste F.Mask))
(pad 14 smd rect (at 19.95 3.55 180) (size 1.3 2.1) (layers F.Cu F.Paste F.Mask))
(pad 15 smd rect (at -1.95 3.55 180) (size 1.3 2.1) (layers F.Cu F.Paste F.Mask))
(pad 7 smd rect (at 9 0 180) (size 0.7 2.6) (layers F.Cu F.Paste F.Mask))
(pad 8 smd rect (at 10.5 0 180) (size 0.7 2.6) (layers F.Cu F.Paste F.Mask))
(pad 9 smd rect (at 12 0 180) (size 0.7 2.6) (layers F.Cu F.Paste F.Mask))
(pad 10 smd rect (at 13.5 0 180) (size 0.7 2.6) (layers F.Cu F.Paste F.Mask))
(pad 11 smd rect (at 15 0 180) (size 0.7 2.6) (layers F.Cu F.Paste F.Mask))
(pad 12 smd rect (at 16.5 0 180) (size 0.7 2.6) (layers F.Cu F.Paste F.Mask))
(pad 13 smd rect (at 18 0 180) (size 0.7 2.6) (layers F.Cu F.Paste F.Mask))
)

26
Cantor_Classic/libraries/kbd_footprints.pretty/HHKB_PRO2_ZH13_TH.kicad_mod Normal file
View File

@@ -0,0 +1,26 @@
(module 00Keyboard:HHKB_PRO2_ZH13_TH (layer F.Cu)
(descr http://www.jst-mfg.com/product/pdf/eng/eZH.pdf)
(tags "JST ZH 13 HHKB pro2")
(fp_text reference HHKB_PRO2_ZH13_TH (at 0 -2.4) (layer F.SilkS) hide
(effects (font (thickness 0.3048)))
)
(fp_text value VAL** (at 0 2.9) (layer F.SilkS)
(effects (font (thickness 0.3048)))
)
(fp_line (start 10.5 1.4) (end -10.5 1.4) (layer F.SilkS) (width 0.15))
(fp_line (start -10.5 1.4) (end -10.5 -1.1) (layer F.SilkS) (width 0.15))
(fp_line (start 10.5 -1.1) (end 10.5 1.4) (layer F.SilkS) (width 0.15))
(pad 1 thru_hole oval (at 9 0) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 2 thru_hole oval (at 7.5 0) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 3 thru_hole oval (at 6 0) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 4 thru_hole oval (at 4.5 0) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 5 thru_hole oval (at 3 0) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 6 thru_hole oval (at 1.5 0) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 7 thru_hole oval (at 0 0) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 8 thru_hole oval (at -1.5 0) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 9 thru_hole oval (at -3 0) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 10 thru_hole oval (at -4.5 0) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 11 thru_hole oval (at -6 0) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 12 thru_hole oval (at -7.5 0) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 13 thru_hole oval (at -9 0) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
)

29
Cantor_Classic/libraries/kbd_footprints.pretty/HHKB_PRO_PH15.kicad_mod Normal file
View File

@@ -0,0 +1,29 @@
(module HHKB_PRO_PH15 (layer F.Cu) (tedit 5566C6FF)
(descr http://www.jst-mfg.com/product/pdf/eng/ePH.pdf)
(tags "JST PH 15 HHKB PRO")
(fp_text reference HHKB_PRO_PH15 (at 0 2.2) (layer F.SilkS) hide
(effects (font (thickness 0.3048)))
)
(fp_text value VAL** (at 0 -2.7) (layer F.SilkS)
(effects (font (thickness 0.3048)))
)
(fp_line (start 15.9 6.25) (end -15.9 6.25) (layer F.SilkS) (width 0.15))
(fp_line (start 15.9 6.25) (end 15.9 -1.6) (layer F.SilkS) (width 0.15))
(fp_line (start 15.9 -1.6) (end -15.9 -1.6) (layer F.SilkS) (width 0.15))
(fp_line (start -15.9 -1.6) (end -15.9 6.25) (layer F.SilkS) (width 0.15))
(pad 1 thru_hole rect (at -14 0 180) (size 1.2 1.2) (drill 0.70104) (layers *.Cu *.Mask F.SilkS))
(pad 2 thru_hole rect (at -12 0 180) (size 1.2 1.2) (drill 0.70104) (layers *.Cu *.Mask F.SilkS))
(pad 3 thru_hole rect (at -10 0 180) (size 1.2 1.2) (drill 0.70104) (layers *.Cu *.Mask F.SilkS))
(pad 4 thru_hole rect (at -8 0 180) (size 1.2 1.2) (drill 0.70104) (layers *.Cu *.Mask F.SilkS))
(pad 5 thru_hole rect (at -6 0 180) (size 1.2 1.2) (drill 0.70104) (layers *.Cu *.Mask F.SilkS))
(pad 6 thru_hole rect (at -4 0 180) (size 1.2 1.2) (drill 0.70104) (layers *.Cu *.Mask F.SilkS))
(pad 7 thru_hole rect (at -2 0 180) (size 1.2 1.2) (drill 0.70104) (layers *.Cu *.Mask F.SilkS))
(pad 8 thru_hole rect (at 0 0 180) (size 1.2 1.2) (drill 0.70104) (layers *.Cu *.Mask F.SilkS))
(pad 9 thru_hole rect (at 2 0 180) (size 1.2 1.2) (drill 0.70104) (layers *.Cu *.Mask F.SilkS))
(pad 10 thru_hole rect (at 4 0 180) (size 1.2 1.2) (drill 0.70104) (layers *.Cu *.Mask F.SilkS))
(pad 11 thru_hole rect (at 6 0 180) (size 1.2 1.2) (drill 0.70104) (layers *.Cu *.Mask F.SilkS))
(pad 12 thru_hole rect (at 8 0 180) (size 1.2 1.2) (drill 0.70104) (layers *.Cu *.Mask F.SilkS))
(pad 13 thru_hole rect (at 10 0 180) (size 1.2 1.2) (drill 0.70104) (layers *.Cu *.Mask F.SilkS))
(pad 14 thru_hole rect (at 12 0 180) (size 1.2 1.2) (drill 0.70104) (layers *.Cu *.Mask F.SilkS))
(pad 15 thru_hole rect (at 14 0 180) (size 1.2 1.2) (drill 0.70104) (layers *.Cu *.Mask F.SilkS))
)

9
Cantor_Classic/libraries/kbd_footprints.pretty/HOLE_M2.6.kicad_mod Normal file
View File

@@ -0,0 +1,9 @@
(module 00Keyboard:HOLE_M2.6 (layer F.Cu)
(fp_text reference HOLE_M2.6 (at 0 -4.5) (layer F.SilkS) hide
(effects (font (thickness 0.3048)))
)
(fp_text value VAL** (at 0.05 -7.25) (layer F.SilkS) hide
(effects (font (thickness 0.3048)))
)
(pad 1 thru_hole circle (at 0 0) (size 2.8 2.8) (drill 2.8) (layers *.Cu *.Mask F.SilkS))
)

9
Cantor_Classic/libraries/kbd_footprints.pretty/HOLE_M3.kicad_mod Normal file
View File

@@ -0,0 +1,9 @@
(module 00Keyboard:HOLE_M3 (layer F.Cu)
(fp_text reference HOLE_M3 (at 0 -4.5) (layer F.SilkS) hide
(effects (font (thickness 0.3048)))
)
(fp_text value VAL** (at 0.05 -7.25) (layer F.SilkS) hide
(effects (font (thickness 0.3048)))
)
(pad 1 thru_hole circle (at 0 0) (size 4 4) (drill 3.2) (layers *.Cu *.Mask F.SilkS))
)

34
Cantor_Classic/libraries/kbd_footprints.pretty/HRS_DF14_20P.kicad_mod Normal file
View File

@@ -0,0 +1,34 @@
(module HRS_DF14_20P (layer F.Cu) (tedit 58AEA20F)
(descr http://www.mouser.com/ds/2/185/e53800017-12550.pdf)
(tags "HHKB JP, HRS, Hirose, DF14, 15P")
(fp_text reference HRS_DF14_20P (at 9.3 -3) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value VAL** (at 9.4 2.6) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(pad "" np_thru_hole circle (at -2.6 -1.1) (size 1.1 1.1) (drill 1.1) (layers *.Cu *.Mask))
(pad 22 smd rect (at 26.15 -5.1) (size 2 2.6) (layers F.Cu F.Paste F.Mask))
(pad 21 smd rect (at -2.4 -5.1) (size 2 2.6) (layers F.Cu F.Paste F.Mask))
(pad 20 smd rect (at 0 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 19 smd rect (at 1.25 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 18 smd rect (at 2.5 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 17 smd rect (at 3.75 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 16 smd rect (at 5 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 15 smd rect (at 6.25 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 14 smd rect (at 7.5 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 13 smd rect (at 8.75 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 12 smd rect (at 10 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 11 smd rect (at 11.25 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 10 smd rect (at 12.5 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 9 smd rect (at 13.75 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 8 smd rect (at 15 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 7 smd rect (at 16.25 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 6 smd rect (at 17.5 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 5 smd rect (at 18.75 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 4 smd rect (at 20 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 3 smd rect (at 21.25 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 2 smd rect (at 22.5 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad 1 smd rect (at 23.75 0) (size 0.7 1.8) (layers F.Cu F.Paste F.Mask))
(pad "" np_thru_hole circle (at 26.35 -1.1) (size 1.1 1.1) (drill 1.1) (layers *.Cu *.Mask))
)

18
Cantor_Classic/libraries/kbd_footprints.pretty/JST_PH2_SMT.kicad_mod Normal file
View File

@@ -0,0 +1,18 @@
(module 00Keyboard:JST_PH2_SMT (layer F.Cu)
(descr http://www.jst-mfg.com/product/pdf/eng/ePH.pdf)
(tags "JST, PH, Lipo, battery")
(fp_text reference JST_PH2_SMT (at 1.2 2.9) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value VAL** (at 1.4 -3.6) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start -2.9 -0.4) (end -2.9 4) (layer F.SilkS) (width 0.2))
(fp_line (start -2.9 -0.4) (end 4.9 -0.4) (layer F.SilkS) (width 0.2))
(fp_line (start 4.9 -0.4) (end 4.9 4) (layer F.SilkS) (width 0.2))
(fp_line (start 3.6 7.2) (end -1.6 7.2) (layer F.SilkS) (width 0.2))
(pad 3 smd rect (at 5.1 5.9) (size 1.5 3.4) (drill (offset -0.75 -0.2)) (layers F.Cu F.Paste F.Mask))
(pad 2 smd rect (at 2 0) (size 1 3.6) (layers F.Cu F.Paste F.Mask))
(pad 3 smd rect (at -1.6 5.9) (size 1.5 3.4) (drill (offset -0.75 -0.2)) (layers F.Cu F.Paste F.Mask))
(pad 1 smd rect (at 0 0) (size 1 3.6) (layers F.Cu F.Paste F.Mask))
)

20
Cantor_Classic/libraries/kbd_footprints.pretty/JST_PH2_SMT_TH.kicad_mod Normal file
View File

@@ -0,0 +1,20 @@
(module JST_PH2_SMT_TH (layer F.Cu)
(descr http://www.jst-mfg.com/product/pdf/eng/ePH.pdf)
(tags "JST, PH, Lipo, battery")
(fp_text reference JST_PH2_SMT (at 1.2 2.9) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value VAL** (at 1.4 -3.6) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start -2.9 -0.4) (end -2.9 4) (layer F.SilkS) (width 0.2))
(fp_line (start -2.9 -0.4) (end 4.9 -0.4) (layer F.SilkS) (width 0.2))
(fp_line (start 4.9 -0.4) (end 4.9 4) (layer F.SilkS) (width 0.2))
(fp_line (start 3.6 7.2) (end -1.6 7.2) (layer F.SilkS) (width 0.2))
(pad 3 smd rect (at 5.1 5.95) (size 1.5 3.4) (drill (offset -0.75 -0.2)) (layers F.Cu F.Paste F.Mask))
(pad 2 smd rect (at 2 0) (size 1 3.5) (layers F.Cu F.Paste F.Mask))
(pad 3 smd rect (at -1.6 5.95) (size 1.5 3.4) (drill (offset -0.75 -0.2)) (layers F.Cu F.Paste F.Mask))
(pad 1 smd rect (at 0 0) (size 1 3.5) (layers F.Cu F.Paste F.Mask))
(pad 2 thru_hole oval (at 2 2) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 1 thru_hole oval (at 0 2) (size 1.2 1.7) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
)

15
Cantor_Classic/libraries/kbd_footprints.pretty/JST_PH2_TH.kicad_mod Normal file
View File

@@ -0,0 +1,15 @@
(module 00Keyboard:JST_PH2_TH (layer F.Cu)
(tags "JST, PH2, Lipo")
(fp_text reference JST_PH2_TH (at 0 -5.5) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value CN** (at 0 -3.05) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 2.95 -6.25) (end -2.95 -6.25) (layer F.SilkS) (width 0.16))
(fp_line (start -2.95 -6.25) (end -2.95 1.6) (layer F.SilkS) (width 0.16))
(fp_line (start -2.95 1.6) (end 2.95 1.6) (layer F.SilkS) (width 0.16))
(fp_line (start 2.95 1.6) (end 2.95 -6.25) (layer F.SilkS) (width 0.16))
(pad 1 thru_hole oval (at 1 0) (size 1.2 1.7) (drill oval 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 2 thru_hole oval (at -1 0) (size 1.2 1.7) (drill oval 0.7) (layers *.Cu *.Mask F.SilkS))
)

20
Cantor_Classic/libraries/kbd_footprints.pretty/LED_0805.kicad_mod Normal file
View File

@@ -0,0 +1,20 @@
(module LED_0805 (layer F.Cu) (tedit 561B67D7)
(descr "LED 0805 smd package")
(tags "LED 0805 SMD")
(attr smd)
(fp_text reference LED_0805 (at 0 -1.55) (layer F.SilkS)
(effects (font (size 0.762 0.762) (thickness 0.127)))
)
(fp_text value Val* (at 0 1.475) (layer F.SilkS)
(effects (font (size 0.762 0.762) (thickness 0.127)))
)
(fp_line (start -2.05 0.8) (end -2.05 -0.8) (layer F.SilkS) (width 0.2))
(fp_line (start -2.225 -0.8) (end -2.225 0.8) (layer F.SilkS) (width 0.2))
(fp_line (start 2 -0.8) (end 0.325 -0.8) (layer F.SilkS) (width 0.2))
(fp_line (start 0.325 0.8) (end 2 0.8) (layer F.SilkS) (width 0.2))
(fp_line (start 2.05 0.8) (end 2.05 -0.8) (layer F.SilkS) (width 0.2))
(fp_line (start -2.2 0.8) (end -0.325 0.8) (layer F.SilkS) (width 0.2))
(fp_line (start -2.2 -0.8) (end -0.35 -0.8) (layer F.SilkS) (width 0.2))
(pad 1 smd rect (at -1.1 0) (size 1.4 1.3) (layers F.Cu F.Paste F.Mask))
(pad 2 smd rect (at 1.1 0) (size 1.4 1.3) (layers F.Cu F.Paste F.Mask))
)

23
Cantor_Classic/libraries/kbd_footprints.pretty/LED_2012_HSOL.kicad_mod Normal file
View File

@@ -0,0 +1,23 @@
(module LED_2012_HSOL (layer F.Cu) (tedit 561B6741)
(descr "LED 0805 smd package")
(tags "LED 0805 SMD")
(attr smd)
(fp_text reference LED_2012_HSOL (at 0 -2) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value LED*** (at 0 2) (layer F.SilkS)
(effects (font (size 0.762 0.762) (thickness 0.127)))
)
(fp_line (start -2.5 -1.2) (end -2.5 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -2.6 1.2) (end -2.6 -1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -2.7 -1.2) (end -2.7 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -1.2 -1.2) (end -2.8 -1.2) (layer F.SilkS) (width 0.2))
(fp_line (start 2.4 -1.2) (end 2.4 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -2.8 1.2) (end -1.2 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -2.8 -1.2) (end -2.8 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start 1.2 -1.2) (end 2.4 -1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -2.4 -1.2) (end -2.4 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start 2.4 1.2) (end 1.2 1.2) (layer F.SilkS) (width 0.2))
(pad 1 smd rect (at -1.1 0) (size 1.6 1.6) (drill (offset -0.1 0)) (layers F.Cu F.Paste F.Mask))
(pad 2 smd rect (at 1.1 0) (size 1.6 1.6) (drill (offset 0.1 0)) (layers F.Cu F.Paste F.Mask))
)

23
Cantor_Classic/libraries/kbd_footprints.pretty/LED_3020_REFLOW.kicad_mod Normal file
View File

@@ -0,0 +1,23 @@
(module LED_3020_REFLOW (layer F.Cu) (tedit 561B5402)
(descr "LED 0805 smd package")
(tags "LED 0805 SMD")
(attr smd)
(fp_text reference LED_3020_REFLOW (at 0 -2) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value LED*** (at 0 2) (layer F.SilkS)
(effects (font (size 0.762 0.762) (thickness 0.127)))
)
(fp_line (start -2.7 -1.2) (end -2.7 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -2.8 1.2) (end -2.8 -1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -2.9 -1.2) (end -2.9 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -1.4 -1.2) (end -3 -1.2) (layer F.SilkS) (width 0.2))
(fp_line (start 2.6 -1.2) (end 2.6 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -3 1.2) (end -1.4 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -3 -1.2) (end -3 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start 1.4 -1.2) (end 2.6 -1.2) (layer F.SilkS) (width 0.2))
(fp_line (start -2.6 -1.2) (end -2.6 1.2) (layer F.SilkS) (width 0.2))
(fp_line (start 2.6 1.2) (end 1.4 1.2) (layer F.SilkS) (width 0.2))
(pad 1 smd rect (at -1.475 0) (size 1.45 1.6) (layers F.Cu F.Paste F.Mask))
(pad 2 smd rect (at 1.475 0) (size 1.45 1.6) (layers F.Cu F.Paste F.Mask))
)

21
Cantor_Classic/libraries/kbd_footprints.pretty/LED_3025_DUAL.kicad_mod Normal file
View File

@@ -0,0 +1,21 @@
(module LED_3025_DUAL (layer F.Cu) (tedit 561B68C1)
(fp_text reference LED_3025_DUAL (at 0 2.575) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value VAL** (at 0 -2.475) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start -3.1 1.85) (end -3.075 -1.85) (layer F.SilkS) (width 0.2))
(fp_line (start -2.925 -1.85) (end -2.925 1.85) (layer F.SilkS) (width 0.2))
(fp_line (start -2.75 1.85) (end -3.25 1.85) (layer F.SilkS) (width 0.2))
(fp_line (start -3.25 1.85) (end -3.25 -1.85) (layer F.SilkS) (width 0.2))
(fp_line (start -3.25 -1.85) (end -2.75 -1.85) (layer F.SilkS) (width 0.2))
(fp_line (start 2.75 -1.85) (end 2.75 1.85) (layer F.SilkS) (width 0.2))
(fp_line (start 2.75 1.85) (end -2.75 1.85) (layer F.SilkS) (width 0.2))
(fp_line (start -2.75 1.85) (end -2.75 -1.85) (layer F.SilkS) (width 0.2))
(fp_line (start -2.75 -1.85) (end 2.75 -1.85) (layer F.SilkS) (width 0.2))
(pad 2 smd rect (at 1.35 -0.825) (size 1.7 1.05) (layers F.Cu F.Paste F.Mask))
(pad 4 smd rect (at 1.35 0.825) (size 1.7 1.05) (layers F.Cu F.Paste F.Mask))
(pad 1 smd rect (at -1.35 -0.825) (size 1.7 1.05) (layers F.Cu F.Paste F.Mask))
(pad 3 smd rect (at -1.35 0.825) (size 1.7 1.05) (layers F.Cu F.Paste F.Mask))
)

18
Cantor_Classic/libraries/kbd_footprints.pretty/LED_TH.kicad_mod Normal file
View File

@@ -0,0 +1,18 @@
(module LED_TH (layer F.Cu) (tedit 561B687B)
(descr "LED 3mm - Lead pitch 100mil (2,54mm)")
(tags "LED led 3mm 3MM 100mil 2,54mm")
(fp_text reference LED*** (at 0 -1.9) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value LED_TH (at 0 2) (layer F.SilkS) hide
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_circle (center -1.27 0) (end -1.27 -1.27) (layer F.SilkS) (width 0.3))
(pad 1 thru_hole circle (at -1.27 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask F.SilkS))
(pad 2 thru_hole circle (at 1.27 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask F.SilkS))
(model discret/leds/led3_vertical_verde.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)

18
Cantor_Classic/libraries/kbd_footprints.pretty/LED_TH_BIVAR.kicad_mod Normal file
View File

@@ -0,0 +1,18 @@
(module LED_TH_BIVAR (layer F.Cu) (tedit 561B6899)
(descr "LED 3mm - Lead pitch 100mil (2,54mm)")
(tags "LED led 3mm 3MM 100mil 2,54mm")
(fp_text reference LED*** (at 0 -1.9) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value LED_TH_BIVAR (at 0 2) (layer F.SilkS) hide
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_circle (center -1.27 0) (end -1.27 -1.27) (layer F.SilkS) (width 0.3))
(pad 1 thru_hole circle (at -1.27 0) (size 1.9 1.9) (drill 1.1176) (layers *.Cu *.Mask F.SilkS))
(pad 2 thru_hole circle (at 1.27 0) (size 1.9 1.9) (drill 1.1176) (layers *.Cu *.Mask F.SilkS))
(model discret/leds/led3_vertical_verde.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)

14
Cantor_Classic/libraries/kbd_footprints.pretty/LTC4054.kicad_mod Normal file
View File

@@ -0,0 +1,14 @@
(module 00Keyboard:LTC4054 (layer F.Cu)
(tags "Lipo charger")
(fp_text reference LTC4054 (at -0.05 3.3) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value U** (at -0.05 -2.9) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 2 smd rect (at 0 1.3) (size 0.6 1.2) (layers F.Cu F.Paste F.Mask))
(pad 3 smd rect (at 0.95 1.3) (size 0.6 1.2) (layers F.Cu F.Paste F.Mask))
(pad 1 smd rect (at -0.95 1.3) (size 0.6 1.2) (layers F.Cu F.Paste F.Mask))
(pad 4 smd rect (at 0.95 -1.3) (size 0.6 1.2) (layers F.Cu F.Paste F.Mask))
(pad 5 smd rect (at -0.95 -1.3) (size 0.6 1.2) (layers F.Cu F.Paste F.Mask))
)

14
Cantor_Classic/libraries/kbd_footprints.pretty/L_6x6MM.kicad_mod Normal file
View File

@@ -0,0 +1,14 @@
(module L_6x6MM (layer F.Cu) (tedit 545247A9)
(fp_text reference L_6x6MM (at 0 0) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value L** (at 0 0) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 3.35 3.95) (end 3.35 -3.95) (layer F.SilkS) (width 0.2))
(fp_line (start -3.35 3.95) (end 3.35 3.95) (layer F.SilkS) (width 0.2))
(fp_line (start -3.35 -3.95) (end 3.35 -3.95) (layer F.SilkS) (width 0.2))
(fp_line (start -3.35 -3.95) (end -3.35 3.95) (layer F.SilkS) (width 0.2))
(pad 2 smd rect (at 0 -2.5) (size 5.7 2) (layers F.Cu F.Paste F.Mask))
(pad 1 smd rect (at 0 2.5) (size 5.7 2) (layers F.Cu F.Paste F.Mask))
)

12
Cantor_Classic/libraries/kbd_footprints.pretty/L_7x7MM.kicad_mod Normal file
View File

@@ -0,0 +1,12 @@
(module L_7x7MM (layer F.Cu)
(fp_text reference L_7x7MM (at 0 0) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value L** (at 0 0) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_circle (center 0 0) (end -4.4 0) (layer F.SilkS) (width 0.2))
(fp_circle (center 0 0) (end 4.025 0) (layer F.SilkS) (width 0.2))
(pad 2 smd rect (at 0 -2.325) (size 7.3 2.65) (layers F.Cu F.Paste F.Mask))
(pad 1 smd rect (at 0 2.325) (size 7.3 2.65) (layers F.Cu F.Paste F.Mask))
)

22
Cantor_Classic/libraries/kbd_footprints.pretty/MINI_DIN_8.kicad_mod Normal file
View File

@@ -0,0 +1,22 @@
(module MINI_DIN_8 (layer F.Cu) (tedit 57125B9F)
(fp_text reference CN1 (at 3.175 1.651) (layer F.SilkS) hide
(effects (font (size 0.8128 0.8128) (thickness 0.2032)))
)
(fp_text value MINI_DIN_8P_JACK (at 0 -6.10108) (layer F.SilkS) hide
(effects (font (thickness 0.3048)))
)
(fp_line (start -6.75 0.8) (end -6.75 8.15) (layer F.SilkS) (width 0.381))
(fp_line (start 6.75 0.8) (end 6.75 8.15) (layer F.SilkS) (width 0.381))
(fp_line (start -6.75 8.15) (end 6.75 8.15) (layer F.SilkS) (width 0.381))
(pad 3 thru_hole circle (at -3.4 3.8 180) (size 1.6 1.6) (drill 1) (layers *.Cu *.Mask F.SilkS))
(pad 5 thru_hole circle (at 3.4 3.8 180) (size 1.6 1.6) (drill 1) (layers *.Cu *.Mask F.SilkS))
(pad 6 thru_hole circle (at -3.4 6.3 180) (size 1.6 1.6) (drill 1) (layers *.Cu *.Mask F.SilkS))
(pad 8 thru_hole circle (at 3.4 6.3 180) (size 1.6 1.6) (drill 1) (layers *.Cu *.Mask F.SilkS))
(pad 9 thru_hole circle (at 0 0 180) (size 3.2 3.2) (drill 2.29) (layers *.Cu *.Mask F.SilkS))
(pad 9 thru_hole circle (at -6.75 0.8 180) (size 3.2 3.2) (drill 2.29) (layers *.Cu *.Mask F.SilkS))
(pad 9 thru_hole circle (at 6.75 0.8 180) (size 3.2 3.2) (drill 2.29) (layers *.Cu *.Mask F.SilkS))
(pad 1 thru_hole circle (at -1.3 3.8 180) (size 1.6 1.6) (drill 1) (layers *.Cu *.Mask F.SilkS))
(pad 2 thru_hole circle (at 1.3 3.8 180) (size 1.6 1.6) (drill 1) (layers *.Cu *.Mask F.SilkS))
(pad 4 thru_hole circle (at -1.3 6.3 180) (size 1.6 1.6) (drill 1) (layers *.Cu *.Mask F.SilkS))
(pad 7 thru_hole circle (at 0.9 6.3 180) (size 1.6 1.6) (drill 1) (layers *.Cu *.Mask F.SilkS))
)

22
Cantor_Classic/libraries/kbd_footprints.pretty/MOS_FET_SOT23-3_HSOL.kicad_mod Normal file
View File

@@ -0,0 +1,22 @@
(module MOS_FET_SOT23-3_HSOL (layer F.Cu)
(descr SOT23)
(attr smd)
(fp_text reference Q1 (at 0 0) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value MOS_N (at 0 0.09906) (layer F.SilkS) hide
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start -1.7 0.7) (end 1.7 0.7) (layer F.SilkS) (width 0.2))
(fp_line (start -1.7 -0.675) (end 1.7 -0.675) (layer F.SilkS) (width 0.2))
(fp_line (start -1.7 0.7) (end -1.7 -0.675) (layer F.SilkS) (width 0.2))
(fp_line (start 1.7 0.7) (end 1.7 -0.675) (layer F.SilkS) (width 0.2))
(pad G smd rect (at -0.95 1.3) (size 0.8 1.2) (layers F.Cu F.Paste F.Mask))
(pad D smd rect (at 0 -1.3) (size 0.8 1.2) (layers F.Cu F.Paste F.Mask))
(pad S smd rect (at 0.95 1.3) (size 0.8 1.2) (layers F.Cu F.Paste F.Mask))
(model smd/smd_transistors/sot23.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)

10
Cantor_Classic/libraries/kbd_footprints.pretty/PIN_1.kicad_mod Normal file
View File

@@ -0,0 +1,10 @@
(module PIN_1 (layer F.Cu) (tedit 54855825)
(tags "CONN pin 1 circle")
(fp_text reference P? (at 0 -1.45) (layer F.SilkS) hide
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value CONN_1 (at 0 -1.45) (layer F.SilkS) hide
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(pad 1 thru_hole circle (at 0 0) (size 1.7 1.7) (drill 1.016) (layers *.Cu *.Mask F.SilkS))
)

10
Cantor_Classic/libraries/kbd_footprints.pretty/PIN_1_SQUARE.kicad_mod Normal file
View File

@@ -0,0 +1,10 @@
(module PIN_1_SQUARE (layer F.Cu) (tedit 548561A4)
(tags "CONN pin 1 square")
(fp_text reference P? (at 0 -1.55) (layer F.SilkS) hide
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value CONN_1 (at 0 -1.55) (layer F.SilkS) hide
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(pad 1 thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1.016) (layers *.Cu *.Mask F.SilkS))
)

14
Cantor_Classic/libraries/kbd_footprints.pretty/PPTC_nano.kicad_mod Normal file
View File

@@ -0,0 +1,14 @@
(module 00Keyboard:PPTC_nano (layer F.Cu)
(fp_text reference PPTC_nano (at 0 2.3) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value VAL** (at 0 -2.35) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start 2.6 -1.5) (end 2.6 1.5) (layer F.SilkS) (width 0.2))
(fp_line (start 2.6 1.5) (end -2.6 1.5) (layer F.SilkS) (width 0.2))
(fp_line (start -2.6 1.5) (end -2.6 -1.5) (layer F.SilkS) (width 0.2))
(fp_line (start -2.6 -1.5) (end 2.6 -1.5) (layer F.SilkS) (width 0.2))
(pad 1 smd rect (at -1.5 0) (size 1 1.6) (layers F.Cu F.Paste F.Mask))
(pad 2 smd rect (at 1.5 0) (size 1 1.6) (layers F.Cu F.Paste F.Mask))
)

15
Cantor_Classic/libraries/kbd_footprints.pretty/PTC_3225.kicad_mod Normal file
View File

@@ -0,0 +1,15 @@
(module 00Keyboard:PTC_3225 (layer F.Cu)
(fp_text reference PTC_3225 (at 0 2.7) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value VAL** (at 0 -2.7) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start -2.9 -1.9) (end 2.8 -1.9) (layer F.SilkS) (width 0.2))
(fp_line (start 2.8 -1.9) (end 2.9 -1.9) (layer F.SilkS) (width 0.2))
(fp_line (start 2.9 -1.9) (end 2.9 1.9) (layer F.SilkS) (width 0.2))
(fp_line (start 2.9 1.9) (end -2.9 1.9) (layer F.SilkS) (width 0.2))
(fp_line (start -2.9 1.9) (end -2.9 -1.9) (layer F.SilkS) (width 0.2))
(pad 2 smd rect (at 1.5 0) (size 1.5 3) (drill (offset 0.2 0)) (layers F.Cu F.Paste F.Mask))
(pad 1 smd rect (at -1.5 0) (size 1.5 3) (drill (offset -0.2 0)) (layers F.Cu F.Paste F.Mask))
)

9
Cantor_Classic/libraries/kbd_footprints.pretty/Poker_oval_hole.kicad_mod Normal file
View File

@@ -0,0 +1,9 @@
(module Poker_oval_hole (layer F.Cu) (tedit 53EE2BFE)
(fp_text reference Poker_oval_hole (at 0 0) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value VAL** (at 0 0) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(pad "" thru_hole circle (at 0 0) (size 6.1 6.1) (drill oval 4.6 2.5) (layers *.Cu *.Mask))
)

9
Cantor_Classic/libraries/kbd_footprints.pretty/Poker_side_edge_long.kicad_mod Normal file
View File

@@ -0,0 +1,9 @@
(module Poker_side_edge_long (layer F.Cu) (tedit 53EE2864)
(fp_text reference Poker_side_edge_long (at 0 0) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value VAL** (at 0 0) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(pad "" thru_hole oval (at 0 0) (size 13.6 5.2) (drill oval 10.6 2.2) (layers *.Cu *.Mask))
)

46
Cantor_Classic/libraries/kbd_footprints.pretty/QFP32.kicad_mod Normal file
View File

@@ -0,0 +1,46 @@
(module QFP32 (layer F.Cu)
(fp_text reference U*** (at 0 -0.95) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value QFP32 (at 0 0.45) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_circle (center -2.3 -2.35) (end -2.025 -2.1) (layer F.SilkS) (width 0.2))
(fp_line (start 3.05 -3.05) (end 3.05 3.025) (layer F.SilkS) (width 0.2))
(fp_line (start 3.05 3.025) (end -3.075 3.025) (layer F.SilkS) (width 0.2))
(fp_line (start -3.075 3.025) (end -3.075 -2.425) (layer F.SilkS) (width 0.2))
(fp_line (start -3.075 -2.425) (end -2.425 -3.075) (layer F.SilkS) (width 0.2))
(fp_line (start -2.425 -3.075) (end 3.05 -3.075) (layer F.SilkS) (width 0.2))
(pad 8 smd rect (at -4.25 2.8) (size 1.5 0.45) (layers F.Cu F.Paste F.Mask))
(pad 7 smd rect (at -4.25 2) (size 1.5 0.45) (layers F.Cu F.Paste F.Mask))
(pad 6 smd rect (at -4.25 1.2) (size 1.5 0.45) (layers F.Cu F.Paste F.Mask))
(pad 5 smd rect (at -4.25 0.4) (size 1.5 0.45) (layers F.Cu F.Paste F.Mask))
(pad 4 smd rect (at -4.25 -0.4) (size 1.5 0.45) (layers F.Cu F.Paste F.Mask))
(pad 3 smd rect (at -4.25 -1.2) (size 1.5 0.45) (layers F.Cu F.Paste F.Mask))
(pad 2 smd rect (at -4.25 -2) (size 1.5 0.45) (layers F.Cu F.Paste F.Mask))
(pad 1 smd rect (at -4.25 -2.8) (size 1.5 0.45) (layers F.Cu F.Paste F.Mask))
(pad 24 smd rect (at 4.25 -2.8) (size 1.5 0.45) (layers F.Cu F.Paste F.Mask))
(pad 17 smd rect (at 4.25 2.8) (size 1.5 0.45) (layers F.Cu F.Paste F.Mask))
(pad 18 smd rect (at 4.25 2) (size 1.5 0.45) (layers F.Cu F.Paste F.Mask))
(pad 19 smd rect (at 4.25 1.2) (size 1.5 0.45) (layers F.Cu F.Paste F.Mask))
(pad 20 smd rect (at 4.25 0.4) (size 1.5 0.45) (layers F.Cu F.Paste F.Mask))
(pad 21 smd rect (at 4.25 -0.4) (size 1.5 0.45) (layers F.Cu F.Paste F.Mask))
(pad 22 smd rect (at 4.25 -1.2) (size 1.5 0.45) (layers F.Cu F.Paste F.Mask))
(pad 23 smd rect (at 4.25 -2) (size 1.5 0.45) (layers F.Cu F.Paste F.Mask))
(pad 32 smd rect (at -2.8 -4.25) (size 0.45 1.5) (layers F.Cu F.Paste F.Mask))
(pad 31 smd rect (at -2 -4.25) (size 0.45 1.5) (layers F.Cu F.Paste F.Mask))
(pad 30 smd rect (at -1.2 -4.25) (size 0.45 1.5) (layers F.Cu F.Paste F.Mask))
(pad 29 smd rect (at -0.4 -4.25) (size 0.45 1.5) (layers F.Cu F.Paste F.Mask))
(pad 28 smd rect (at 0.4 -4.25) (size 0.45 1.5) (layers F.Cu F.Paste F.Mask))
(pad 27 smd rect (at 1.2 -4.25) (size 0.45 1.5) (layers F.Cu F.Paste F.Mask))
(pad 26 smd rect (at 2 -4.25) (size 0.45 1.5) (layers F.Cu F.Paste F.Mask))
(pad 25 smd rect (at 2.8 -4.25) (size 0.45 1.5) (layers F.Cu F.Paste F.Mask))
(pad 9 smd rect (at -2.8 4.25) (size 0.45 1.5) (layers F.Cu F.Paste F.Mask))
(pad 10 smd rect (at -2 4.25) (size 0.45 1.5) (layers F.Cu F.Paste F.Mask))
(pad 11 smd rect (at -1.2 4.25) (size 0.45 1.5) (layers F.Cu F.Paste F.Mask))
(pad 12 smd rect (at -0.4 4.25) (size 0.45 1.5) (layers F.Cu F.Paste F.Mask))
(pad 13 smd rect (at 0.4 4.25) (size 0.45 1.5) (layers F.Cu F.Paste F.Mask))
(pad 14 smd rect (at 1.2 4.25) (size 0.45 1.5) (layers F.Cu F.Paste F.Mask))
(pad 15 smd rect (at 2 4.25) (size 0.45 1.5) (layers F.Cu F.Paste F.Mask))
(pad 16 smd rect (at 2.8 4.25) (size 0.45 1.5) (layers F.Cu F.Paste F.Mask))
)

79
Cantor_Classic/libraries/kbd_footprints.pretty/QFP32_reflow.kicad_mod Normal file
View File

@@ -0,0 +1,79 @@
(module QFP32_reflow (layer F.Cu) (tedit 54DD1FAE)
(descr http://www.atmel.com/images/atmel-8826-seeprom-pcb-mounting-guidelines-surface-mount-packages-applicationnote.pdf)
(fp_text reference U*** (at 0 -0.95) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value QFP32 (at 0 0.45) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_circle (center -2.3 -2.35) (end -2.025 -2.1) (layer F.SilkS) (width 0.2))
(fp_line (start 3.05 -3.05) (end 3.05 3.025) (layer F.SilkS) (width 0.2))
(fp_line (start 3.05 3.025) (end -3.075 3.025) (layer F.SilkS) (width 0.2))
(fp_line (start -3.075 3.025) (end -3.075 -2.425) (layer F.SilkS) (width 0.2))
(fp_line (start -3.075 -2.425) (end -2.425 -3.075) (layer F.SilkS) (width 0.2))
(fp_line (start -2.425 -3.075) (end 3.05 -3.075) (layer F.SilkS) (width 0.2))
(pad 1 smd rect (at -4.2 -2.8) (size 1.5 0.55) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 2 smd rect (at -4.2 -2) (size 1.5 0.55) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 3 smd rect (at -4.2 -1.2) (size 1.5 0.55) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 4 smd rect (at -4.2 -0.4) (size 1.5 0.55) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 5 smd rect (at -4.2 0.4) (size 1.5 0.55) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 6 smd rect (at -4.2 1.2) (size 1.5 0.55) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 7 smd rect (at -4.2 2) (size 1.5 0.55) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 8 smd rect (at -4.2 2.8) (size 1.5 0.55) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 9 smd rect (at -2.8 4.2) (size 0.55 1.5) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 10 smd rect (at -2 4.2) (size 0.55 1.5) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 11 smd rect (at -1.2 4.2) (size 0.55 1.5) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 12 smd rect (at -0.4 4.2) (size 0.55 1.5) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 13 smd rect (at 0.4 4.2) (size 0.55 1.5) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 14 smd rect (at 1.2 4.2) (size 0.55 1.5) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 15 smd rect (at 2 4.2) (size 0.55 1.5) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 16 smd rect (at 2.8 4.2) (size 0.55 1.5) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 17 smd rect (at 4.2 2.8) (size 1.5 0.55) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 18 smd rect (at 4.2 2) (size 1.5 0.55) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 19 smd rect (at 4.2 1.2) (size 1.5 0.55) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 20 smd rect (at 4.2 0.4) (size 1.5 0.55) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 21 smd rect (at 4.2 -0.4) (size 1.5 0.55) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 22 smd rect (at 4.2 -1.2) (size 1.5 0.55) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 23 smd rect (at 4.2 -2) (size 1.5 0.55) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 24 smd rect (at 4.2 -2.8) (size 1.5 0.55) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 25 smd rect (at 2.8 -4.2) (size 0.55 1.5) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 26 smd rect (at 2 -4.2) (size 0.55 1.5) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 27 smd rect (at 1.2 -4.2) (size 0.55 1.5) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 28 smd rect (at 0.4 -4.2) (size 0.55 1.5) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 29 smd rect (at -0.4 -4.2) (size 0.55 1.5) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 30 smd rect (at -1.2 -4.2) (size 0.55 1.5) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 31 smd rect (at -2 -4.2) (size 0.55 1.5) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
(pad 32 smd rect (at -2.8 -4.2) (size 0.55 1.5) (layers F.Cu F.Paste F.Mask)
(clearance 0.15))
)

59
Cantor_Classic/libraries/kbd_footprints.pretty/QFP44.kicad_mod Normal file
View File

@@ -0,0 +1,59 @@
(module QFP44 (layer F.Cu) (tedit 5485B3DD)
(attr smd)
(fp_text reference U*** (at 0 -1.905) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value QFP44 (at 0 1.905) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start -3.6 -4.45) (end -4.475 -3.6) (layer F.SilkS) (width 0.3))
(fp_line (start -4.475 -3.6) (end -4.475 4.45) (layer F.SilkS) (width 0.3))
(fp_line (start -4.475 4.45) (end 4.45 4.45) (layer F.SilkS) (width 0.3))
(fp_line (start 4.45 4.45) (end 4.45 -4.45) (layer F.SilkS) (width 0.3))
(fp_line (start 4.45 -4.45) (end -3.6 -4.45) (layer F.SilkS) (width 0.3))
(fp_circle (center -3.235 -3.16) (end -3.235 -2.525) (layer F.SilkS) (width 0.2032))
(pad 39 smd rect (at 0 -5.715) (size 0.4064 1.524) (layers F.Cu F.Paste F.Mask))
(pad 40 smd rect (at -0.8001 -5.715) (size 0.4064 1.524) (layers F.Cu F.Paste F.Mask))
(pad 41 smd rect (at -1.6002 -5.715) (size 0.4064 1.524) (layers F.Cu F.Paste F.Mask))
(pad 42 smd rect (at -2.4003 -5.715) (size 0.4064 1.524) (layers F.Cu F.Paste F.Mask))
(pad 43 smd rect (at -3.2004 -5.715) (size 0.4064 1.524) (layers F.Cu F.Paste F.Mask))
(pad 44 smd rect (at -4.0005 -5.715) (size 0.4064 1.524) (layers F.Cu F.Paste F.Mask))
(pad 38 smd rect (at 0.8001 -5.715) (size 0.4064 1.524) (layers F.Cu F.Paste F.Mask))
(pad 37 smd rect (at 1.6002 -5.715) (size 0.4064 1.524) (layers F.Cu F.Paste F.Mask))
(pad 36 smd rect (at 2.4003 -5.715) (size 0.4064 1.524) (layers F.Cu F.Paste F.Mask))
(pad 35 smd rect (at 3.2004 -5.715) (size 0.4064 1.524) (layers F.Cu F.Paste F.Mask))
(pad 34 smd rect (at 4.0005 -5.715) (size 0.4064 1.524) (layers F.Cu F.Paste F.Mask))
(pad 17 smd rect (at 0 5.715) (size 0.4064 1.524) (layers F.Cu F.Paste F.Mask))
(pad 16 smd rect (at -0.8001 5.715) (size 0.4064 1.524) (layers F.Cu F.Paste F.Mask))
(pad 15 smd rect (at -1.6002 5.715) (size 0.4064 1.524) (layers F.Cu F.Paste F.Mask))
(pad 14 smd rect (at -2.4003 5.715) (size 0.4064 1.524) (layers F.Cu F.Paste F.Mask))
(pad 13 smd rect (at -3.2004 5.715) (size 0.4064 1.524) (layers F.Cu F.Paste F.Mask))
(pad 12 smd rect (at -4.0005 5.715) (size 0.4064 1.524) (layers F.Cu F.Paste F.Mask))
(pad 18 smd rect (at 0.8001 5.715) (size 0.4064 1.524) (layers F.Cu F.Paste F.Mask))
(pad 19 smd rect (at 1.6002 5.715) (size 0.4064 1.524) (layers F.Cu F.Paste F.Mask))
(pad 20 smd rect (at 2.4003 5.715) (size 0.4064 1.524) (layers F.Cu F.Paste F.Mask))
(pad 21 smd rect (at 3.2004 5.715) (size 0.4064 1.524) (layers F.Cu F.Paste F.Mask))
(pad 22 smd rect (at 4.0005 5.715) (size 0.4064 1.524) (layers F.Cu F.Paste F.Mask))
(pad 6 smd rect (at -5.715 0) (size 1.524 0.4064) (layers F.Cu F.Paste F.Mask))
(pad 28 smd rect (at 5.715 0) (size 1.524 0.4064) (layers F.Cu F.Paste F.Mask))
(pad 7 smd rect (at -5.715 0.8001) (size 1.524 0.4064) (layers F.Cu F.Paste F.Mask))
(pad 27 smd rect (at 5.715 0.8001) (size 1.524 0.4064) (layers F.Cu F.Paste F.Mask))
(pad 26 smd rect (at 5.715 1.6002) (size 1.524 0.4064) (layers F.Cu F.Paste F.Mask))
(pad 8 smd rect (at -5.715 1.6002) (size 1.524 0.4064) (layers F.Cu F.Paste F.Mask))
(pad 9 smd rect (at -5.715 2.4003) (size 1.524 0.4064) (layers F.Cu F.Paste F.Mask))
(pad 25 smd rect (at 5.715 2.4003) (size 1.524 0.4064) (layers F.Cu F.Paste F.Mask))
(pad 24 smd rect (at 5.715 3.2004) (size 1.524 0.4064) (layers F.Cu F.Paste F.Mask))
(pad 10 smd rect (at -5.715 3.2004) (size 1.524 0.4064) (layers F.Cu F.Paste F.Mask))
(pad 11 smd rect (at -5.715 4.0005) (size 1.524 0.4064) (layers F.Cu F.Paste F.Mask))
(pad 23 smd rect (at 5.715 4.0005) (size 1.524 0.4064) (layers F.Cu F.Paste F.Mask))
(pad 29 smd rect (at 5.715 -0.8001) (size 1.524 0.4064) (layers F.Cu F.Paste F.Mask))
(pad 5 smd rect (at -5.715 -0.8001) (size 1.524 0.4064) (layers F.Cu F.Paste F.Mask))
(pad 4 smd rect (at -5.715 -1.6002) (size 1.524 0.4064) (layers F.Cu F.Paste F.Mask))
(pad 30 smd rect (at 5.715 -1.6002) (size 1.524 0.4064) (layers F.Cu F.Paste F.Mask))
(pad 31 smd rect (at 5.715 -2.4003) (size 1.524 0.4064) (layers F.Cu F.Paste F.Mask))
(pad 3 smd rect (at -5.715 -2.4003) (size 1.524 0.4064) (layers F.Cu F.Paste F.Mask))
(pad 2 smd rect (at -5.715 -3.2004) (size 1.524 0.4064) (layers F.Cu F.Paste F.Mask))
(pad 32 smd rect (at 5.715 -3.2004) (size 1.524 0.4064) (layers F.Cu F.Paste F.Mask))
(pad 33 smd rect (at 5.715 -4.0005) (size 1.524 0.4064) (layers F.Cu F.Paste F.Mask))
(pad 1 smd rect (at -5.715 -4.0005) (size 1.524 0.4064) (layers F.Cu F.Paste F.Mask))
)

60
Cantor_Classic/libraries/kbd_footprints.pretty/QFP44_reflow.kicad_mod Normal file
View File

@@ -0,0 +1,60 @@
(module QFP44_reflow (layer F.Cu) (tedit 54DD1E10)
(descr http://www.atmel.com/images/atmel-8826-seeprom-pcb-mounting-guidelines-surface-mount-packages-applicationnote.pdf)
(attr smd)
(fp_text reference U*** (at 0 -1.905) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value QFP44 (at 0 1.905) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start -3.6 -4.45) (end -4.475 -3.6) (layer F.SilkS) (width 0.3))
(fp_line (start -4.475 -3.6) (end -4.475 4.45) (layer F.SilkS) (width 0.3))
(fp_line (start -4.475 4.45) (end 4.45 4.45) (layer F.SilkS) (width 0.3))
(fp_line (start 4.45 4.45) (end 4.45 -4.45) (layer F.SilkS) (width 0.3))
(fp_line (start 4.45 -4.45) (end -3.6 -4.45) (layer F.SilkS) (width 0.3))
(fp_circle (center -3.235 -3.16) (end -3.235 -2.525) (layer F.SilkS) (width 0.2032))
(pad 1 smd rect (at -5.7 -4) (size 1.5 0.55) (layers F.Cu F.Mask))
(pad 2 smd rect (at -5.7 -3.2) (size 1.5 0.55) (layers F.Cu F.Mask))
(pad 3 smd rect (at -5.7 -2.4) (size 1.5 0.55) (layers F.Cu F.Mask))
(pad 4 smd rect (at -5.7 -1.6) (size 1.5 0.55) (layers F.Cu F.Mask))
(pad 5 smd rect (at -5.7 -0.8) (size 1.5 0.55) (layers F.Cu F.Mask))
(pad 6 smd rect (at -5.7 0) (size 1.5 0.55) (layers F.Cu F.Mask))
(pad 7 smd rect (at -5.7 0.8) (size 1.5 0.55) (layers F.Cu F.Mask))
(pad 8 smd rect (at -5.7 1.6) (size 1.5 0.55) (layers F.Cu F.Mask))
(pad 9 smd rect (at -5.7 2.4) (size 1.5 0.55) (layers F.Cu F.Mask))
(pad 10 smd rect (at -5.7 3.2) (size 1.5 0.55) (layers F.Cu F.Mask))
(pad 11 smd rect (at -5.7 4) (size 1.5 0.55) (layers F.Cu F.Mask))
(pad 12 smd rect (at -4 5.7) (size 0.55 1.5) (layers F.Cu F.Mask))
(pad 13 smd rect (at -3.2 5.7) (size 0.55 1.5) (layers F.Cu F.Mask))
(pad 14 smd rect (at -2.4 5.7) (size 0.55 1.5) (layers F.Cu F.Mask))
(pad 15 smd rect (at -1.6 5.7) (size 0.55 1.5) (layers F.Cu F.Mask))
(pad 16 smd rect (at -0.8 5.7) (size 0.55 1.5) (layers F.Cu F.Mask))
(pad 17 smd rect (at 0 5.7) (size 0.55 1.5) (layers F.Cu F.Mask))
(pad 18 smd rect (at 0.8 5.7) (size 0.55 1.5) (layers F.Cu F.Mask))
(pad 19 smd rect (at 1.6 5.7) (size 0.55 1.5) (layers F.Cu F.Mask))
(pad 20 smd rect (at 2.4 5.7) (size 0.55 1.5) (layers F.Cu F.Mask))
(pad 21 smd rect (at 3.2 5.7) (size 0.55 1.5) (layers F.Cu F.Mask))
(pad 22 smd rect (at 4 5.7) (size 0.55 1.5) (layers F.Cu F.Mask))
(pad 23 smd rect (at 5.7 4) (size 1.5 0.55) (layers F.Cu F.Mask))
(pad 24 smd rect (at 5.7 3.2) (size 1.5 0.55) (layers F.Cu F.Mask))
(pad 25 smd rect (at 5.7 2.4) (size 1.5 0.55) (layers F.Cu F.Mask))
(pad 26 smd rect (at 5.7 1.6) (size 1.5 0.55) (layers F.Cu F.Mask))
(pad 27 smd rect (at 5.7 0.8) (size 1.5 0.55) (layers F.Cu F.Mask))
(pad 28 smd rect (at 5.7 0) (size 1.5 0.55) (layers F.Cu F.Mask))
(pad 29 smd rect (at 5.7 -0.8) (size 1.5 0.55) (layers F.Cu F.Mask))
(pad 30 smd rect (at 5.7 -1.6) (size 1.5 0.55) (layers F.Cu F.Mask))
(pad 31 smd rect (at 5.7 -2.4) (size 1.5 0.55) (layers F.Cu F.Mask))
(pad 32 smd rect (at 5.7 -3.2) (size 1.5 0.55) (layers F.Cu F.Mask))
(pad 33 smd rect (at 5.7 -4) (size 1.5 0.55) (layers F.Cu F.Mask))
(pad 34 smd rect (at 4 -5.7) (size 0.55 1.5) (layers F.Cu F.Mask))
(pad 35 smd rect (at 3.2 -5.7) (size 0.55 1.5) (layers F.Cu F.Mask))
(pad 36 smd rect (at 2.4 -5.7) (size 0.55 1.5) (layers F.Cu F.Mask))
(pad 37 smd rect (at 1.6 -5.7) (size 0.55 1.5) (layers F.Cu F.Mask))
(pad 38 smd rect (at 0.8 -5.7) (size 0.55 1.5) (layers F.Cu F.Mask))
(pad 39 smd rect (at 0 -5.7) (size 0.55 1.5) (layers F.Cu F.Mask))
(pad 40 smd rect (at -0.8 -5.7) (size 0.55 1.5) (layers F.Cu F.Mask))
(pad 41 smd rect (at -1.6 -5.7) (size 0.55 1.5) (layers F.Cu F.Mask))
(pad 42 smd rect (at -2.4 -5.7) (size 0.55 1.5) (layers F.Cu F.Mask))
(pad 43 smd rect (at -3.2 -5.7) (size 0.55 1.5) (layers F.Cu F.Mask))
(pad 44 smd rect (at -4 -5.7) (size 0.55 1.5) (layers F.Cu F.Mask))
)

48
Cantor_Classic/libraries/kbd_footprints.pretty/RN42.kicad_mod Normal file
View File

@@ -0,0 +1,48 @@
(module 00Keyboard:RN42 (layer F.Cu)
(fp_text reference RN42 (at 6.3 7.5) (layer F.SilkS)
(effects (font (size 1.2 1.2) (thickness 0.2)))
)
(fp_text value VAL** (at 6.858 17.78) (layer F.SilkS)
(effects (font (size 0.762 0.762) (thickness 0.127)))
)
(fp_line (start 13.4 16) (end 0 16) (layer F.SilkS) (width 0.2))
(fp_line (start 0 16) (end 0 -9.6) (layer F.SilkS) (width 0.2))
(fp_line (start 0 -9.6) (end 13.4 -9.6) (layer F.SilkS) (width 0.2))
(fp_line (start 13.4 -9.6) (end 13.4 16) (layer F.SilkS) (width 0.2))
(pad 11 smd rect (at 0 12) (size 1.5 0.8) (layers F.Cu F.Paste F.Mask))
(pad 12 smd rect (at 0 13.2) (size 1.5 0.8) (layers F.Cu F.Paste F.Mask))
(pad 10 smd rect (at 0 10.8) (size 1.5 0.8) (layers F.Cu F.Paste F.Mask))
(pad 9 smd rect (at 0 9.6) (size 1.5 0.8) (layers F.Cu F.Paste F.Mask))
(pad 5 smd rect (at 0 4.8) (size 1.5 0.8) (layers F.Cu F.Paste F.Mask))
(pad 6 smd rect (at 0 6) (size 1.5 0.8) (layers F.Cu F.Paste F.Mask))
(pad 8 smd rect (at 0 8.4) (size 1.5 0.8) (layers F.Cu F.Paste F.Mask))
(pad 7 smd rect (at 0 7.2) (size 1.5 0.8) (layers F.Cu F.Paste F.Mask))
(pad 3 smd rect (at 0 2.4) (size 1.5 0.8) (layers F.Cu F.Paste F.Mask))
(pad 4 smd rect (at 0 3.6) (size 1.5 0.8) (layers F.Cu F.Paste F.Mask))
(pad 2 smd rect (at 0 1.2) (size 1.5 0.8) (layers F.Cu F.Paste F.Mask))
(pad 1 smd rect (at 0 0) (size 1.5 0.8) (layers F.Cu F.Paste F.Mask))
(pad 13 smd rect (at 13.4 13.2) (size 1.5 0.8) (layers F.Cu F.Paste F.Mask))
(pad 14 smd rect (at 13.4 12) (size 1.5 0.8) (layers F.Cu F.Paste F.Mask))
(pad 15 smd rect (at 13.4 10.8) (size 1.5 0.8) (layers F.Cu F.Paste F.Mask))
(pad 16 smd rect (at 13.4 9.6) (size 1.5 0.8) (layers F.Cu F.Paste F.Mask))
(pad 17 smd rect (at 13.4 8.4) (size 1.5 0.8) (layers F.Cu F.Paste F.Mask))
(pad 18 smd rect (at 13.4 7.2) (size 1.5 0.8) (layers F.Cu F.Paste F.Mask))
(pad 19 smd rect (at 13.4 6) (size 1.5 0.8) (layers F.Cu F.Paste F.Mask))
(pad 20 smd rect (at 13.4 4.8) (size 1.5 0.8) (layers F.Cu F.Paste F.Mask))
(pad 21 smd rect (at 13.4 3.6) (size 1.5 0.8) (layers F.Cu F.Paste F.Mask))
(pad 22 smd rect (at 13.4 2.4) (size 1.5 0.8) (layers F.Cu F.Paste F.Mask))
(pad 23 smd rect (at 13.4 1.2) (size 1.5 0.8) (layers F.Cu F.Paste F.Mask))
(pad 24 smd rect (at 13.4 0) (size 1.5 0.8) (layers F.Cu F.Paste F.Mask))
(pad 35 smd rect (at 2.6 16) (size 0.8 1.5) (layers F.Cu F.Paste F.Mask)
(clearance 0.1778))
(pad 29 smd rect (at 3.6 16) (size 0.8 1.5) (layers F.Cu F.Paste F.Mask)
(clearance 0.1778))
(pad 34 smd rect (at 4.9 16) (size 0.8 1.5) (layers F.Cu F.Paste F.Mask))
(pad 33 smd rect (at 6.1 16) (size 0.8 1.5) (layers F.Cu F.Paste F.Mask))
(pad 32 smd rect (at 7.3 16) (size 0.8 1.5) (layers F.Cu F.Paste F.Mask))
(pad 31 smd rect (at 8.5 16) (size 0.8 1.5) (layers F.Cu F.Paste F.Mask))
(pad 28 smd rect (at 9.8 16) (size 0.8 1.5) (layers F.Cu F.Paste F.Mask)
(clearance 0.1778))
(pad 30 smd rect (at 10.8 16) (size 0.8 1.5) (layers F.Cu F.Paste F.Mask)
(clearance 0.1778))
)

23
Cantor_Classic/libraries/kbd_footprints.pretty/R_1608.kicad_mod Normal file
View File

@@ -0,0 +1,23 @@
(module R_1608 (layer F.Cu)
(descr "SMT, 1608, 0603")
(tags "SMT, 1608, 0603")
(fp_text reference R_1608 (at 0.025 -1.575) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value R** (at 2.8 -0.025) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start -1.65 -0.8) (end 1.65 -0.8) (layer F.SilkS) (width 0.2))
(fp_line (start 1.65 -0.8) (end 1.65 0.8) (layer F.SilkS) (width 0.2))
(fp_line (start 1.65 0.8) (end -1.65 0.8) (layer F.SilkS) (width 0.2))
(fp_line (start -1.65 0.8) (end -1.65 -0.8) (layer F.SilkS) (width 0.2))
(pad 2 smd rect (at 0.85 0) (size 1.1 1.1) (layers F.Cu F.Paste F.Mask)
(clearance 0.1))
(pad 1 smd rect (at -0.85 0) (size 1.1 1.1) (layers F.Cu F.Paste F.Mask)
(clearance 0.1))
(model smd/capacitors/c_0603.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)

17
Cantor_Classic/libraries/kbd_footprints.pretty/R_1608_NOGUIDE.kicad_mod Normal file
View File

@@ -0,0 +1,17 @@
(module R_1608_NOGUIDE (layer F.Cu) (tedit 548607C6)
(descr "SMT, 1608, 0603")
(tags "SMT, 1608, 0603")
(fp_text reference R_1608_NOGUIDE (at 0 -1.5) (layer F.SilkS) hide
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value R*** (at 0 1.4) (layer F.SilkS) hide
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(pad 2 smd rect (at 0.85 0) (size 1.1 1.1) (layers F.Cu F.Paste F.Mask))
(pad 1 smd rect (at -0.85 0) (size 1.1 1.1) (layers F.Cu F.Paste F.Mask))
(model smd/capacitors/c_0603.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)

23
Cantor_Classic/libraries/kbd_footprints.pretty/R_1608_rev2.kicad_mod Normal file
View File

@@ -0,0 +1,23 @@
(module keyboard_parts:R_1608_rev2 (layer F.Cu) (tedit 5B78DCCA)
(descr "SMT, 1608, 0603")
(tags "SMT, 1608, 0603")
(fp_text reference REF** (at 0 -1.4 180) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value R_1608_rev2 (at 0 1.475 180) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start -1.65 -0.8) (end 1.65 -0.8) (layer F.SilkS) (width 0.2))
(fp_line (start 1.65 -0.8) (end 1.65 0.8) (layer F.SilkS) (width 0.2))
(fp_line (start 1.65 0.8) (end -1.65 0.8) (layer F.SilkS) (width 0.2))
(fp_line (start -1.65 0.8) (end -1.65 -0.8) (layer F.SilkS) (width 0.2))
(pad 2 smd roundrect (at 0.85 0) (size 0.8 0.9) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(clearance 0.1))
(pad 1 smd roundrect (at -0.85 0) (size 0.8 0.9) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(clearance 0.1))
(model smd/capacitors/c_0603.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)

23
Cantor_Classic/libraries/kbd_footprints.pretty/R_2012.kicad_mod Normal file
View File

@@ -0,0 +1,23 @@
(module 00Keyboard:R_2012 (layer F.Cu)
(descr "SMT, 1608, 0603")
(tags "SMT, 1608, 0603")
(fp_text reference R_2012 (at 0 -1.8) (layer F.SilkS) hide
(effects (font (size 0.6 0.6) (thickness 0.15)))
)
(fp_text value R*** (at 0 1.8) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start -1 0.8) (end -1 1.15) (layer F.SilkS) (width 0.16))
(fp_line (start -1 1.15) (end 1.05 1.15) (layer F.SilkS) (width 0.16))
(fp_line (start 1.05 1.15) (end 1.05 0.8) (layer F.SilkS) (width 0.16))
(fp_line (start -1 -1.15) (end -1 -0.8) (layer F.SilkS) (width 0.16))
(fp_line (start -1 -1.15) (end 1.05 -1.15) (layer F.SilkS) (width 0.16))
(fp_line (start 1.05 -1.15) (end 1.05 -0.8) (layer F.SilkS) (width 0.16))
(pad 2 smd rect (at 1 0) (size 1.2 1.6) (layers F.Cu F.Paste F.Mask))
(pad 1 smd rect (at -1 0) (size 1.2 1.6) (layers F.Cu F.Paste F.Mask))
(model smd/capacitors/c_0603.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)

17
Cantor_Classic/libraries/kbd_footprints.pretty/SLP3-200-100-F.kicad_mod Normal file
View File

@@ -0,0 +1,17 @@
(module SLP3-200-100-F (layer F.Cu) (tedit 54175F4C)
(fp_text reference SLP3-200-100-F (at 0 -8.925) (layer F.SilkS) hide
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value Val** (at 0 2.54) (layer F.SilkS) hide
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start -1.4986 -7.747) (end 1.4986 -7.747) (layer Dwgs.User) (width 0.2))
(fp_line (start 1.4986 -5.207) (end 1.4986 -7.747) (layer Dwgs.User) (width 0.2))
(fp_line (start -1.4986 -5.207) (end -1.4986 -7.747) (layer Dwgs.User) (width 0.2))
(fp_line (start -2.2606 -4.4704) (end 2.2606 -4.4704) (layer Dwgs.User) (width 0.2))
(fp_line (start -2.2606 -0.9144) (end 2.2606 -0.9144) (layer Dwgs.User) (width 0.2))
(fp_line (start -2.2606 -5.207) (end 2.2606 -5.207) (layer Dwgs.User) (width 0.2))
(fp_line (start -2.2606 1.143) (end 2.2606 1.143) (layer Dwgs.User) (width 0.2))
(fp_line (start 2.2606 -5.207) (end 2.2606 1.143) (layer Dwgs.User) (width 0.2))
(fp_line (start -2.2606 1.143) (end -2.2606 -5.207) (layer Dwgs.User) (width 0.2))
)

23
Cantor_Classic/libraries/kbd_footprints.pretty/SM_3216_POL.kicad_mod Normal file
View File

@@ -0,0 +1,23 @@
(module SM_3216_POL (layer F.Cu) (tedit 548607E4)
(attr smd)
(fp_text reference C1 (at 0 -2.1) (layer F.SilkS)
(effects (font (size 0.762 0.762) (thickness 0.127)))
)
(fp_text value 10u (at 0 2.1) (layer F.SilkS) hide
(effects (font (size 0.762 0.762) (thickness 0.127)))
)
(fp_line (start -2.8 -1.3) (end -2.8 1.3) (layer F.SilkS) (width 0.2))
(fp_line (start -0.6 -1.3) (end -3 -1.3) (layer F.SilkS) (width 0.2))
(fp_line (start -3 -1.3) (end -3 1.3) (layer F.SilkS) (width 0.2))
(fp_line (start -3 1.3) (end -0.6 1.3) (layer F.SilkS) (width 0.2))
(fp_line (start 0.6 1.3) (end 2.6 1.3) (layer F.SilkS) (width 0.2))
(fp_line (start 2.6 1.3) (end 2.6 -1.3) (layer F.SilkS) (width 0.2))
(fp_line (start 2.6 -1.3) (end 0.6 -1.3) (layer F.SilkS) (width 0.2))
(pad 1 smd rect (at -1.5 0) (size 1.8 2) (layers F.Cu F.Paste F.Mask))
(pad 2 smd rect (at 1.5 0) (size 1.8 2) (layers F.Cu F.Paste F.Mask))
(model smd/chip_cms_pol.wrl
(at (xyz 0 0 0))
(scale (xyz 0.1700000017881393 0.1599999964237213 0.1599999964237213))
(rotate (xyz 0 0 0))
)
)

22
Cantor_Classic/libraries/kbd_footprints.pretty/SOLDER_JUMPER_2.kicad_mod Normal file
View File

@@ -0,0 +1,22 @@
(module SOLDER_JUMPER_2 (layer F.Cu) (tedit 54860803)
(tags "solder jumper bridge configuration")
(attr virtual)
(fp_text reference JP*** (at 0 -1.7) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value SOLDER_JUMPER_2 (at 0 1.65) (layer F.SilkS) hide
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start 0.95 -0.6) (end 0.95 0.55) (layer F.SilkS) (width 0.2))
(fp_line (start -0.7 -0.85) (end 0.7 -0.85) (layer F.SilkS) (width 0.2))
(fp_line (start -0.95 0.6) (end -0.95 -0.6) (layer F.SilkS) (width 0.2))
(fp_line (start -0.65 0.85) (end 0.65 0.85) (layer F.SilkS) (width 0.2))
(fp_arc (start -0.7 0.6) (end -0.7 0.85) (angle 90) (layer F.SilkS) (width 0.2))
(fp_arc (start -0.7 -0.6) (end -0.95 -0.6) (angle 90) (layer F.SilkS) (width 0.2))
(fp_arc (start 0.7 -0.6) (end 0.7 -0.85) (angle 90) (layer F.SilkS) (width 0.2))
(fp_arc (start 0.7 0.6) (end 0.95 0.6) (angle 90) (layer F.SilkS) (width 0.2))
(pad 2 smd rect (at 0.4 0) (size 0.6 1.2) (layers F.Cu F.Mask)
(clearance 0.1))
(pad 1 smd rect (at -0.4 0) (size 0.6 1.2) (layers F.Cu F.Mask)
(clearance 0.1))
)

23
Cantor_Classic/libraries/kbd_footprints.pretty/SOLDER_JUMPER_2_WIRED.kicad_mod Normal file
View File

@@ -0,0 +1,23 @@
(module SOLDER_JUMPER_2_WIRED (layer F.Cu)
(tags "solder jumper bridge configuration")
(attr virtual)
(fp_text reference JP4 (at 1.8 0.1 90) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value JUMPER (at 0 1.65) (layer F.SilkS) hide
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start 0.95 -0.6) (end 0.95 0.55) (layer F.SilkS) (width 0.2))
(fp_line (start -0.7 -0.85) (end 0.7 -0.85) (layer F.SilkS) (width 0.2))
(fp_line (start -0.95 0.6) (end -0.95 -0.6) (layer F.SilkS) (width 0.2))
(fp_line (start -0.65 0.85) (end 0.65 0.85) (layer F.SilkS) (width 0.2))
(fp_arc (start -0.7 0.6) (end -0.7 0.85) (angle 90) (layer F.SilkS) (width 0.2))
(fp_arc (start -0.7 -0.6) (end -0.95 -0.6) (angle 90) (layer F.SilkS) (width 0.2))
(fp_arc (start 0.7 -0.6) (end 0.7 -0.85) (angle 90) (layer F.SilkS) (width 0.2))
(fp_arc (start 0.7 0.6) (end 0.95 0.6) (angle 90) (layer F.SilkS) (width 0.2))
(pad 1 smd rect (at 0.4 0) (size 0.6 1.2) (layers F.Cu F.Mask)
(clearance 0.1))
(pad 1 smd rect (at -0.4 0) (size 0.6 1.2) (layers F.Cu F.Mask)
(clearance 0.1))
(pad 1 smd rect (at 0 0) (size 0.5 0.5) (layers F.Cu F.Paste F.Mask))
)

24
Cantor_Classic/libraries/kbd_footprints.pretty/SOLDER_JUMPER_3.kicad_mod Normal file
View File

@@ -0,0 +1,24 @@
(module SOLDER_JUMPER_3 (layer F.Cu) (tedit 54860828)
(tags "solder jumper bridge configuration")
(attr virtual)
(fp_text reference JP*** (at 0 -1.7) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value SOLDER_JUMPER_3 (at 0 1.65) (layer F.SilkS) hide
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start 1.35 -0.55) (end 1.35 0.6) (layer F.SilkS) (width 0.2))
(fp_line (start -1.1 -0.85) (end 1.1 -0.85) (layer F.SilkS) (width 0.2))
(fp_line (start -1.35 0.6) (end -1.35 -0.6) (layer F.SilkS) (width 0.2))
(fp_line (start -1.05 0.85) (end 1.1 0.85) (layer F.SilkS) (width 0.2))
(fp_arc (start -1.1 0.6) (end -1.1 0.85) (angle 90) (layer F.SilkS) (width 0.2))
(fp_arc (start -1.1 -0.6) (end -1.35 -0.6) (angle 90) (layer F.SilkS) (width 0.2))
(fp_arc (start 1.1 -0.6) (end 1.1 -0.85) (angle 90) (layer F.SilkS) (width 0.2))
(fp_arc (start 1.1 0.6) (end 1.35 0.6) (angle 90) (layer F.SilkS) (width 0.2))
(pad 2 smd rect (at 0 0) (size 0.6 1.2) (layers F.Cu F.Mask)
(clearance 0.1))
(pad 3 smd rect (at 0.8 0) (size 0.6 1.2) (layers F.Cu F.Mask)
(clearance 0.1))
(pad 1 smd rect (at -0.8 0) (size 0.6 1.2) (layers F.Cu F.Mask)
(clearance 0.1))
)

25
Cantor_Classic/libraries/kbd_footprints.pretty/SOT23-3_HSOL.kicad_mod Normal file
View File

@@ -0,0 +1,25 @@
(module 00Keyboard:SOT23-3_HSOL (layer F.Cu)
(descr SOT23)
(attr smd)
(fp_text reference SOT23-3 (at 0 0) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value Q*** (at 0 0.09906) (layer F.SilkS) hide
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start 0.9525 0.6985) (end 0.9525 1.3589) (layer F.SilkS) (width 0.127))
(fp_line (start -0.9525 0.6985) (end -0.9525 1.3589) (layer F.SilkS) (width 0.127))
(fp_line (start 0 -0.6985) (end 0 -1.3589) (layer F.SilkS) (width 0.127))
(fp_line (start -1.4986 -0.6985) (end 1.4986 -0.6985) (layer F.SilkS) (width 0.127))
(fp_line (start 1.4986 -0.6985) (end 1.4986 0.6985) (layer F.SilkS) (width 0.127))
(fp_line (start 1.4986 0.6985) (end -1.4986 0.6985) (layer F.SilkS) (width 0.127))
(fp_line (start -1.4986 0.6985) (end -1.4986 -0.6985) (layer F.SilkS) (width 0.127))
(pad 1 smd rect (at -0.95 1.3) (size 0.8 1.2) (layers F.Cu F.Paste F.Mask))
(pad 3 smd rect (at 0 -1.3) (size 0.8 1.2) (layers F.Cu F.Paste F.Mask))
(pad 2 smd rect (at 0.95 1.3) (size 0.8 1.2) (layers F.Cu F.Paste F.Mask))
(model smd/smd_transistors/sot23.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)

24
Cantor_Classic/libraries/kbd_footprints.pretty/SOT23-5_HSOL.kicad_mod Normal file
View File

@@ -0,0 +1,24 @@
(module SOT23-5_HSOL (layer F.Cu)
(descr SOT23)
(attr smd)
(fp_text reference SOT23-5 (at 0 0) (layer F.SilkS) hide
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value Q*** (at 0 0.09906) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start -1.6 -0.7) (end 1.6 -0.7) (layer F.SilkS) (width 0.2))
(fp_line (start 1.6 -0.7) (end 1.6 0.7) (layer F.SilkS) (width 0.2))
(fp_line (start 1.6 0.7) (end -1.6 0.7) (layer F.SilkS) (width 0.2))
(fp_line (start -1.6 0.7) (end -1.6 -0.7) (layer F.SilkS) (width 0.2))
(pad 1 smd rect (at -0.95 1.3) (size 0.6 1.2) (layers F.Cu F.Paste F.Mask))
(pad 3 smd rect (at 0.95 1.3) (size 0.6 1.2) (layers F.Cu F.Paste F.Mask))
(pad 2 smd rect (at 0 1.3) (size 0.6 1.2) (layers F.Cu F.Paste F.Mask))
(pad 5 smd rect (at -0.95 -1.3) (size 0.6 1.2) (layers F.Cu F.Paste F.Mask))
(pad 4 smd rect (at 0.95 -1.3) (size 0.6 1.2) (layers F.Cu F.Paste F.Mask))
(model smd/smd_transistors/sot23.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)

25
Cantor_Classic/libraries/kbd_footprints.pretty/SOT23-6_HSOL.kicad_mod Normal file
View File

@@ -0,0 +1,25 @@
(module 00Keyboard:SOT23-6_HSOL (layer F.Cu)
(descr SOT23)
(attr smd)
(fp_text reference SOT23-6 (at 0 0) (layer F.SilkS) hide
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value Q*** (at 0 0.09906) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start -1.4986 -0.6985) (end 1.4986 -0.6985) (layer F.SilkS) (width 0.127))
(fp_line (start 1.4986 -0.6985) (end 1.4986 0.6985) (layer F.SilkS) (width 0.127))
(fp_line (start 1.4986 0.6985) (end -1.4986 0.6985) (layer F.SilkS) (width 0.127))
(fp_line (start -1.4986 0.6985) (end -1.4986 -0.6985) (layer F.SilkS) (width 0.127))
(pad 1 smd rect (at -0.95 1.3) (size 0.6 1.2) (layers F.Cu F.Paste F.Mask))
(pad 5 smd rect (at 0 -1.3) (size 0.6 1.2) (layers F.Cu F.Paste F.Mask))
(pad 3 smd rect (at 0.95 1.3) (size 0.6 1.2) (layers F.Cu F.Paste F.Mask))
(pad 2 smd rect (at 0 1.3) (size 0.6 1.2) (layers F.Cu F.Paste F.Mask))
(pad 6 smd rect (at -0.95 -1.3) (size 0.6 1.2) (layers F.Cu F.Paste F.Mask))
(pad 4 smd rect (at 0.95 -1.3) (size 0.6 1.2) (layers F.Cu F.Paste F.Mask))
(model smd/smd_transistors/sot23.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)

17
Cantor_Classic/libraries/kbd_footprints.pretty/SW_ALPS_SKRP.kicad_mod Normal file
View File

@@ -0,0 +1,17 @@
(module SW_ALPS_SKRP (layer F.Cu)
(fp_text reference SW_ALPS_SKRP (at 0 -2.3) (layer F.SilkS) hide
(effects (font (size 0.6096 0.6096) (thickness 0.1524)))
)
(fp_text value VAL** (at 0 2.425) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.1524)))
)
(fp_line (start -2.95 -1.75) (end 2.95 -1.75) (layer F.SilkS) (width 0.2))
(fp_line (start 2.95 -1.75) (end 2.95 1.75) (layer F.SilkS) (width 0.2))
(fp_line (start 2.95 1.75) (end -2.95 1.75) (layer F.SilkS) (width 0.2))
(fp_line (start -2.95 1.75) (end -2.95 -1.65) (layer F.SilkS) (width 0.2))
(fp_line (start -2.95 -1.65) (end -2.95 -1.75) (layer F.SilkS) (width 0.2))
(pad 2 smd rect (at 2.1 1.1) (size 1.1 0.7) (layers F.Cu F.Paste F.Mask))
(pad 2 smd rect (at -2.1 1.1) (size 1.1 0.7) (layers F.Cu F.Paste F.Mask))
(pad 1 smd rect (at -2.1 -1.1) (size 1.1 0.7) (layers F.Cu F.Paste F.Mask))
(pad 1 smd rect (at 2.1 -1.1) (size 1.1 0.7) (layers F.Cu F.Paste F.Mask))
)

34
Cantor_Classic/libraries/kbd_footprints.pretty/SW_ALPS_SKSG.kicad_mod Normal file
View File

@@ -0,0 +1,34 @@
(module 00Keyboard:SW_ALPS_SKSG (layer F.Cu)
(fp_text reference SW1 (at 0 -0.65) (layer F.SilkS)
(effects (font (size 0.5 0.5) (thickness 0.125)))
)
(fp_text value SW_PUSH (at 0 0.85) (layer F.SilkS) hide
(effects (font (size 0.5 0.5) (thickness 0.125)))
)
(fp_line (start -1 0.85) (end 1 0.85) (layer F.SilkS) (width 0.2))
(fp_line (start -1 -0.8) (end 1 -0.8) (layer F.SilkS) (width 0.2))
(fp_line (start -0.5 0.15) (end -0.5 -0.15) (layer F.SilkS) (width 0.2))
(fp_line (start -0.35 -0.3) (end -0.35 0.35) (layer F.SilkS) (width 0.2))
(fp_line (start 0 -0.8) (end 0 -0.3) (layer F.SilkS) (width 0.2))
(fp_line (start 0 0.75) (end 0 0.3) (layer F.SilkS) (width 0.2))
(fp_line (start 1.95 -1.2) (end 1.95 1.2) (layer F.SilkS) (width 0.15))
(fp_line (start 1.95 1.2) (end 1.1 1.2) (layer F.SilkS) (width 0.15))
(fp_line (start 1.1 -1.2) (end 1.95 -1.2) (layer F.SilkS) (width 0.15))
(fp_line (start -1.95 -1.15) (end -1.95 -1.2) (layer F.SilkS) (width 0.15))
(fp_line (start -1.95 -1.2) (end -1.15 -1.2) (layer F.SilkS) (width 0.15))
(fp_line (start -1.95 -1.15) (end -1.95 1.15) (layer F.SilkS) (width 0.15))
(fp_line (start -1.95 1.15) (end -1.95 1.2) (layer F.SilkS) (width 0.15))
(fp_line (start -1.95 1.2) (end -1.15 1.2) (layer F.SilkS) (width 0.15))
(pad 1 smd rect (at -1.55 -0.8) (size 0.625 0.6) (layers F.Cu F.Paste F.Mask)
(clearance 0.05))
(pad 1 smd rect (at 1.55 -0.8) (size 0.625 0.6) (layers F.Cu F.Paste F.Mask)
(clearance 0.05))
(pad 2 smd rect (at -1.55 0.8) (size 0.625 0.6) (layers F.Cu F.Paste F.Mask)
(clearance 0.05))
(pad 2 smd rect (at 1.55 0.8) (size 0.625 0.6) (layers F.Cu F.Paste F.Mask)
(clearance 0.05))
(pad 6 smd rect (at 1.7 0) (size 0.325 0.7) (layers F.Cu F.Paste F.Mask)
(clearance 0.05))
(pad 5 smd rect (at -1.7 0) (size 0.325 0.7) (layers F.Cu F.Paste F.Mask)
(clearance 0.05))
)

28
Cantor_Classic/libraries/kbd_footprints.pretty/SW_ALPS_SSAA.kicad_mod Normal file
View File

@@ -0,0 +1,28 @@
(module 00Keyboard:SW_ALPS_SSAA (layer F.Cu)
(fp_text reference SW_ALPS_SSAA (at -0.05 0.05) (layer F.SilkS) hide
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value SW** (at 0 4.1) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start 5.2 -3) (end 5.2 3) (layer Dwgs.User) (width 0.16))
(fp_line (start 5.2 3) (end -5.2 3) (layer Dwgs.User) (width 0.16))
(fp_line (start -5.2 3) (end -5.2 -3) (layer Dwgs.User) (width 0.16))
(fp_line (start -5.2 -3) (end 5.2 -3) (layer Dwgs.User) (width 0.16))
(fp_line (start 4.75 -5) (end -2.25 -5) (layer Dwgs.User) (width 0.16))
(fp_line (start 2.5 -5.6) (end 4.75 -5.6) (layer Dwgs.User) (width 0.16))
(fp_line (start 4.75 -5.6) (end 4.75 -5) (layer Dwgs.User) (width 0.16))
(fp_line (start -2.25 -5) (end -2.25 -5.6) (layer Dwgs.User) (width 0.16))
(fp_line (start -2.25 -5.6) (end 0 -5.6) (layer Dwgs.User) (width 0.16))
(fp_line (start 0 -6.95) (end 0 -5.6) (layer Dwgs.User) (width 0.16))
(fp_line (start 0 -7) (end 2.5 -7) (layer Dwgs.User) (width 0.16))
(fp_line (start 2.5 -7) (end 2.5 -5.6) (layer Dwgs.User) (width 0.16))
(pad 5 thru_hole circle (at -2 -1.25) (size 1.2 1.2) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 6 thru_hole circle (at 2 -1.25) (size 1.2 1.2) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 4 thru_hole circle (at 0 -1.25) (size 1.2 1.2) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 1 thru_hole circle (at 0 1.25) (size 1.2 1.2) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 3 thru_hole circle (at 2 1.25) (size 1.2 1.2) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 2 thru_hole circle (at -2 1.25) (size 1.2 1.2) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 8 thru_hole circle (at 5 0) (size 2.3 2.3) (drill 1.5) (layers *.Cu *.Mask F.SilkS))
(pad 7 thru_hole circle (at -5 0) (size 2.3 2.3) (drill 1.5) (layers *.Cu *.Mask F.SilkS))
)

22
Cantor_Classic/libraries/kbd_footprints.pretty/SW_MINI_SLIDE.kicad_mod Normal file
View File

@@ -0,0 +1,22 @@
(module SW_MINI_SLIDE (layer F.Cu) (tedit 5417DB38)
(fp_text reference SW_MINI_SLIDE (at -0.05 0.05) (layer F.SilkS) hide
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_text value SW** (at 0 4.1) (layer F.SilkS)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start 1.62 -1.85) (end 1.62 -3.65) (layer F.SilkS) (width 0.2))
(fp_line (start 1.62 -3.65) (end 0.92 -3.65) (layer F.SilkS) (width 0.2))
(fp_line (start 0.92 -3.65) (end 0.92 -1.85) (layer F.SilkS) (width 0.2))
(fp_line (start -5 -3.1) (end -5 -3.2) (layer F.SilkS) (width 0.2))
(fp_line (start -5 -3.2) (end 5 -3.2) (layer F.SilkS) (width 0.2))
(fp_line (start 5 -3.2) (end 5 3.2) (layer F.SilkS) (width 0.2))
(fp_line (start 5 3.2) (end -5 3.2) (layer F.SilkS) (width 0.2))
(fp_line (start -5 3.2) (end -5 -3.1) (layer F.SilkS) (width 0.2))
(pad 3 thru_hole circle (at -2.54 -1.27) (size 1.2 1.2) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 2 thru_hole circle (at 2.54 -1.27) (size 1.2 1.2) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 1 thru_hole circle (at 0 -1.27) (size 1.2 1.2) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 4 thru_hole circle (at 0 1.27) (size 1.2 1.2) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 5 thru_hole circle (at 2.54 1.27) (size 1.2 1.2) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 6 thru_hole circle (at -2.54 1.27) (size 1.2 1.2) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
)

21
Cantor_Classic/libraries/kbd_footprints.pretty/SW_TACT_TH_HORIZ.kicad_mod Normal file
View File

@@ -0,0 +1,21 @@
(module SW_TACT_TH_HORIZ (layer F.Cu) (tedit 59087171)
(descr http://www.alps.com/products/WebObjects/catalog.woa/E/HTML/Tact/SnapIn/SKHH/SKHHLMA010.html)
(tags "ALPS SKHH tactile switch")
(fp_text reference SW1 (at 0.05 -5) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value SW_PUSH (at 0 -2.55) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 3.75 2.55) (end 3.75 -1.05) (layer F.SilkS) (width 0.15))
(fp_line (start -3.75 2.55) (end 3.75 2.55) (layer F.SilkS) (width 0.15))
(fp_line (start -3.75 -1.05) (end -3.75 2.55) (layer F.SilkS) (width 0.15))
(fp_line (start -3.75 -4) (end 3.75 -4) (layer F.SilkS) (width 0.15))
(fp_line (start 1.5 3.85) (end 1.5 2.75) (layer F.SilkS) (width 0.15))
(fp_line (start -1.5 3.85) (end 1.5 3.85) (layer F.SilkS) (width 0.15))
(fp_line (start -1.5 2.75) (end -1.5 3.85) (layer F.SilkS) (width 0.15))
(pad 4 thru_hole circle (at -3.5 -2.5) (size 2 2) (drill 1.3) (layers *.Cu *.Mask F.SilkS))
(pad 3 thru_hole circle (at 3.5 -2.5) (size 2 2) (drill 1.3) (layers *.Cu *.Mask F.SilkS))
(pad 2 thru_hole circle (at -2.25 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask F.SilkS))
(pad 1 thru_hole circle (at 2.25 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask F.SilkS))
)

21
Cantor_Classic/libraries/kbd_footprints.pretty/SW_TACT_TH_HORIZ_LOW.kicad_mod Normal file
View File

@@ -0,0 +1,21 @@
(module 00Keyboard:SW_TACT_TH_HORIZ_LOW (layer F.Cu)
(descr http://www.alps.com/products/WebObjects/catalog.woa/E/HTML/Tact/SnapIn/SKHL/SKHLLAA010.html)
(tags "ALPS SKHLL low tactile switch")
(fp_text reference SW_TACT_TH_HORIZ_LOW (at 0.05 -5) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value SW** (at 0 -2.55) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -1.5 2.75) (end -1.5 3.75) (layer F.SilkS) (width 0.15))
(fp_line (start -1.5 3.75) (end 1.5 3.75) (layer F.SilkS) (width 0.15))
(fp_line (start 1.5 3.75) (end 1.5 2.75) (layer F.SilkS) (width 0.15))
(fp_line (start -3.75 -4) (end 3.75 -4) (layer F.SilkS) (width 0.15))
(fp_line (start -3.65 -1.05) (end -3.65 2.55) (layer F.SilkS) (width 0.15))
(fp_line (start -3.65 2.55) (end 3.65 2.55) (layer F.SilkS) (width 0.15))
(fp_line (start 3.65 2.55) (end 3.65 -1.05) (layer F.SilkS) (width 0.15))
(pad 1 thru_hole circle (at 2.5 0) (size 1.6 1.6) (drill 1) (layers *.Cu *.Mask F.SilkS))
(pad 2 thru_hole circle (at -2.5 0) (size 1.6 1.6) (drill 1) (layers *.Cu *.Mask F.SilkS))
(pad 3 thru_hole circle (at 3.5 -2.5) (size 2 2) (drill 1.3) (layers *.Cu *.Mask F.SilkS))
(pad 4 thru_hole circle (at -3.5 -2.55) (size 2 2) (drill 1.3) (layers *.Cu *.Mask F.SilkS))
)

22
Cantor_Classic/libraries/kbd_footprints.pretty/USB_A.kicad_mod Normal file
View File

@@ -0,0 +1,22 @@
(module USB_A (layer F.Cu) (tedit 54CEF080)
(fp_text reference J** (at 2.3 0 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value USB_A (at 3.9 0 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -1.2 -6.57) (end 2.71 -6.57) (layer F.SilkS) (width 0.15))
(fp_line (start 2.71 6.57) (end -1.143 6.57) (layer F.SilkS) (width 0.15))
(fp_line (start -1.2 -6.57) (end -1.2 6.57) (layer F.SilkS) (width 0.15))
(pad 4 thru_hole circle (at 0 -3.5) (size 1.62 1.62) (drill 0.92) (layers *.Cu *.Mask F.SilkS))
(pad 3 thru_hole circle (at 0 -1) (size 1.62 1.62) (drill 0.92) (layers *.Cu *.Mask F.SilkS))
(pad 2 thru_hole circle (at 0 1) (size 1.62 1.62) (drill 0.92) (layers *.Cu *.Mask F.SilkS))
(pad 1 thru_hole circle (at 0 3.5) (size 1.62 1.62) (drill 0.92) (layers *.Cu *.Mask F.SilkS))
(pad 5 thru_hole circle (at 2.71 -6.57) (size 3 3) (drill 2.3) (layers *.Cu *.Mask F.SilkS))
(pad 5 thru_hole circle (at 2.71 6.57) (size 3 3) (drill 2.3) (layers *.Cu *.Mask F.SilkS))
(model Connect/USB_A.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)

16
Cantor_Classic/libraries/kbd_footprints.pretty/USB_A_PLUG.kicad_mod Normal file
View File

@@ -0,0 +1,16 @@
(module USB_A_PLUG (layer F.Cu) (tedit 54C86CE2)
(fp_text reference USB_A_PLUG (at 0 -5.5) (layer F.SilkS)
(effects (font (size 1.5 1.5) (thickness 0.15)))
)
(fp_text value VAL** (at 0 2.4) (layer F.SilkS)
(effects (font (size 1.5 1.5) (thickness 0.15)))
)
(pad 2 thru_hole circle (at -1 0) (size 1.524 1.524) (drill 0.93) (layers *.Cu *.Mask F.SilkS))
(pad 3 thru_hole circle (at 1 0) (size 1.524 1.524) (drill 0.93) (layers *.Cu *.Mask F.SilkS))
(pad 4 thru_hole circle (at 3.5 0) (size 1.524 1.524) (drill 0.93) (layers *.Cu *.Mask F.SilkS))
(pad 1 thru_hole circle (at -3.5 0) (size 1.524 1.524) (drill 0.93) (layers *.Cu *.Mask F.SilkS))
(pad 6 thru_hole circle (at 2.25 -2.4) (size 1.1 1.1) (drill 1.1) (layers *.Cu *.Mask F.SilkS))
(pad 6 thru_hole circle (at -2.25 -2.4) (size 1.1 1.1) (drill 1.1) (layers *.Cu *.Mask F.SilkS))
(pad 5 thru_hole oval (at 5.85 -2.4) (size 1.9 3.2) (drill oval 1.2 2.5) (layers *.Cu *.Mask F.SilkS))
(pad 5 thru_hole oval (at -5.85 -2.4) (size 1.9 3.2) (drill oval 1.2 2.5) (layers *.Cu *.Mask F.SilkS))
)

35
Cantor_Classic/libraries/kbd_footprints.pretty/USB_microB.kicad_mod Normal file
View File

@@ -0,0 +1,35 @@
(module USB_microB (layer F.Cu) (tedit 5778AF29)
(descr "USB microB hirose ZX62R-B-5P")
(tags "USB micorB hirose")
(fp_text reference J** (at 0 -0.6985) (layer F.SilkS)
(effects (font (size 0.8128 0.8128) (thickness 0.2032)))
)
(fp_text value USB_microB (at 0 0.22606) (layer F.SilkS) hide
(effects (font (size 0.6 0.6) (thickness 0.15)))
)
(fp_text user "PCB edge" (at -0.05 1.45) (layer F.SilkS) hide
(effects (font (size 0.5 0.5) (thickness 0.125)))
)
(fp_line (start 3.75 2.15) (end 4.25 2.75) (layer Dwgs.User) (width 0.2))
(fp_line (start -3.75 2.15) (end -4.25 2.675) (layer Dwgs.User) (width 0.2))
(fp_line (start -3 1.45) (end 3 1.45) (layer Dwgs.User) (width 0.2))
(fp_line (start -3.75 2.15) (end -3.75 1.35) (layer Dwgs.User) (width 0.2))
(fp_line (start -3.75 2.15) (end 3.75 2.15) (layer Dwgs.User) (width 0.2))
(fp_line (start 3.75 2.15) (end 3.75 1.35) (layer Dwgs.User) (width 0.2))
(pad 6 smd rect (at 0.85 0) (size 1.2 1.9) (layers F.Cu F.Paste F.Mask))
(pad 1 smd rect (at 1.29794 -2.67462 180) (size 0.4 1.35) (layers F.Cu F.Paste F.Mask)
(clearance 0.1))
(pad 6 smd rect (at -3.0988 -2.3495) (size 2.1 2) (layers F.Cu F.Paste F.Mask))
(pad 6 smd rect (at 3.0988 -2.3495) (size 2.1 2) (layers F.Cu F.Paste F.Mask))
(pad 6 smd rect (at -4.09956 0) (size 1.6 1.9) (layers F.Cu F.Paste F.Mask))
(pad 6 smd rect (at 4.09956 0) (size 1.6 1.9) (layers F.Cu F.Paste F.Mask))
(pad 2 smd rect (at 0.65024 -2.67462 180) (size 0.4 1.35) (layers F.Cu F.Paste F.Mask)
(clearance 0.1))
(pad 3 smd rect (at 0 -2.67462 180) (size 0.4 1.35) (layers F.Cu F.Paste F.Mask)
(clearance 0.1))
(pad 4 smd rect (at -0.65024 -2.67462 180) (size 0.4 1.35) (layers F.Cu F.Paste F.Mask)
(clearance 0.1))
(pad 5 smd rect (at -1.30048 -2.67462 180) (size 0.4 1.35) (layers F.Cu F.Paste F.Mask)
(clearance 0.1))
(pad 6 smd rect (at -0.85 0) (size 1.2 1.9) (layers F.Cu F.Paste F.Mask))
)

31
Cantor_Classic/libraries/kbd_footprints.pretty/USB_miniB.kicad_mod Normal file
View File

@@ -0,0 +1,31 @@
(module 00Keyboard:USB_miniB (layer F.Cu)
(descr http://www.hirose.co.jp/cataloge_hp/e24000019.pdf)
(tags "USB miniB hirose")
(fp_text reference J1 (at 0 0.508) (layer F.SilkS)
(effects (font (size 0.8128 0.8128) (thickness 0.2032)))
)
(fp_text value USB_B (at 0 7.112) (layer F.SilkS) hide
(effects (font (thickness 0.3048)))
)
(fp_line (start 2.25 -0.95) (end 2.4 -1.15) (layer Dwgs.User) (width 0.2))
(fp_line (start 2.25 -0.95) (end 2.4 -1.15) (layer Dwgs.User) (width 0.2))
(fp_line (start 4.191 5.715) (end 4.191 -2.6035) (layer Dwgs.User) (width 0.2))
(fp_line (start -4.191 5.715) (end 4.191 5.715) (layer Dwgs.User) (width 0.2))
(fp_line (start -2.413 -2.6035) (end -4.191 -2.6035) (layer Dwgs.User) (width 0.2))
(fp_line (start -4.191 -2.6035) (end -4.191 5.715) (layer Dwgs.User) (width 0.2))
(fp_line (start 4.191 -2.6035) (end 2.413 -2.6035) (layer Dwgs.User) (width 0.2))
(fp_line (start 2.413 -2.6035) (end 2.413 -1.143) (layer Dwgs.User) (width 0.2))
(fp_line (start 2.413 -1.143) (end 2.2225 -0.9525) (layer Dwgs.User) (width 0.2))
(fp_line (start 2.2225 -0.9525) (end -2.159 -0.9525) (layer Dwgs.User) (width 0.2))
(fp_line (start -2.159 -0.9525) (end -2.413 -1.143) (layer Dwgs.User) (width 0.2))
(fp_line (start -2.413 -1.143) (end -2.413 -2.6035) (layer Dwgs.User) (width 0.2))
(pad 1 smd rect (at -1.59766 -2.75082) (size 0.50038 1.99898) (layers F.Cu F.Paste F.Mask))
(pad 2 smd rect (at -0.79756 -2.75082) (size 0.50038 1.99898) (layers F.Cu F.Paste F.Mask))
(pad 3 smd rect (at 0.00254 -2.75082) (size 0.50038 1.99898) (layers F.Cu F.Paste F.Mask))
(pad 4 smd rect (at 0.80264 -2.75082) (size 0.50038 1.99898) (layers F.Cu F.Paste F.Mask))
(pad 5 smd rect (at 1.60274 -2.75082) (size 0.50038 1.99898) (layers F.Cu F.Paste F.Mask))
(pad 6 smd rect (at -4.19862 -2.65176) (size 2.49936 2.19964) (layers F.Cu F.Paste F.Mask))
(pad 7 smd rect (at 4.20116 -2.65176) (size 2.49936 2.19964) (layers F.Cu F.Paste F.Mask))
(pad 8 smd rect (at -4.19862 2.64668) (size 2.49936 2.19964) (layers F.Cu F.Paste F.Mask))
(pad 9 smd rect (at 4.2037 2.64668) (size 2.49936 2.19964) (layers F.Cu F.Paste F.Mask))
)

29
Cantor_Classic/libraries/kbd_footprints.pretty/USB_miniB_hirose_5S8.kicad_mod Normal file
View File

@@ -0,0 +1,29 @@
(module USB_miniB_hirose_5S8 (layer F.Cu) (tedit 5950B1FC)
(descr "USB miniB hirose UX60SC-MB-5S8")
(tags "USB miniB hirose through hole UX60SC-MB-5S8")
(fp_text reference J1 (at 0 2.45) (layer F.SilkS) hide
(effects (font (size 0.8128 0.8128) (thickness 0.2032)))
)
(fp_text value USB_mini_micro_B (at 0 7.95) (layer Dwgs.User) hide
(effects (font (thickness 0.3048)))
)
(fp_line (start 3.85 -0.4) (end 3.85 6.1) (layer F.SilkS) (width 0.2))
(fp_line (start -3.85 -0.4) (end -3.85 6.1) (layer F.SilkS) (width 0.2))
(fp_line (start -3.85 -0.4) (end 3.85 -0.4) (layer F.SilkS) (width 0.2))
(fp_line (start -1 6.1) (end 1 6.1) (layer Dwgs.User) (width 0.2))
(fp_line (start -3.85 6.6) (end -3.85 5.7) (layer Dwgs.User) (width 0.2))
(fp_line (start 3.85 6.6) (end 3.85 5.7) (layer Dwgs.User) (width 0.2))
(fp_text user "PCB edge" (at -0.05 5.35) (layer Dwgs.User) hide
(effects (font (size 0.5 0.5) (thickness 0.125)))
)
(fp_line (start -3.85 6.6) (end 3.85 6.6) (layer Dwgs.User) (width 0.2))
(pad 6 smd rect (at 2.675 5.2) (size 2.35 0.8) (layers F.Cu F.Paste F.Mask))
(pad 6 smd rect (at -2.675 5.2) (size 2.35 0.8) (layers F.Cu F.Paste F.Mask))
(pad 1 smd rect (at -1.6 0) (size 0.5 1.4) (layers F.Cu F.Paste F.Mask))
(pad 2 smd rect (at -0.8 0) (size 0.5 1.4) (layers F.Cu F.Paste F.Mask))
(pad 3 smd rect (at 0 0) (size 0.5 1.4) (layers F.Cu F.Paste F.Mask))
(pad 4 smd rect (at 0.8 0) (size 0.5 1.4) (layers F.Cu F.Paste F.Mask))
(pad 5 smd rect (at 1.6 0) (size 0.5 1.4) (layers F.Cu F.Paste F.Mask))
(pad 6 thru_hole oval (at -3.65 2.4) (size 1.5 4) (drill oval 0.7 3.2) (layers *.Cu *.Mask F.Paste))
(pad 6 thru_hole oval (at 3.65 2.4) (size 1.5 4) (drill oval 0.7 3.2) (layers *.Cu *.Mask F.Paste))
)

24
Cantor_Classic/libraries/kbd_footprints.pretty/USB_miniB_hirose_5ST.kicad_mod Normal file
View File

@@ -0,0 +1,24 @@
(module USB_miniB_hirose_5ST (layer F.Cu) (tedit 565D8621)
(descr "USB miniB hirose UX60SC_MB_5ST")
(tags "USB miniB hirose new")
(fp_text reference J1 (at 0 2.45) (layer F.SilkS)
(effects (font (size 0.8128 0.8128) (thickness 0.2032)))
)
(fp_text value USB_miniB (at 0 7.95) (layer F.SilkS) hide
(effects (font (thickness 0.3048)))
)
(fp_line (start -1 6.1) (end 1 6.1) (layer Dwgs.User) (width 0.2))
(fp_line (start -3.85 6.6) (end -3.85 5.7) (layer Dwgs.User) (width 0.2))
(fp_line (start 3.85 6.6) (end 3.85 5.7) (layer Dwgs.User) (width 0.2))
(fp_text user "PCB edge" (at -0.05 5.35) (layer F.SilkS) hide
(effects (font (size 0.5 0.5) (thickness 0.125)))
)
(fp_line (start -3.85 6.6) (end 3.85 6.6) (layer Dwgs.User) (width 0.2))
(pad 1 smd rect (at -1.6 0) (size 0.5 1.4) (layers F.Cu F.Paste F.Mask))
(pad 2 smd rect (at -0.8 0) (size 0.5 1.4) (layers F.Cu F.Paste F.Mask))
(pad 3 smd rect (at 0 0) (size 0.5 1.4) (layers F.Cu F.Paste F.Mask))
(pad 4 smd rect (at 0.8 0) (size 0.5 1.4) (layers F.Cu F.Paste F.Mask))
(pad 5 smd rect (at 1.6 0) (size 0.5 1.4) (layers F.Cu F.Paste F.Mask))
(pad 6 smd rect (at -4.2 2.4) (size 2.5 3.8) (layers F.Cu F.Paste F.Mask))
(pad 6 smd rect (at 4.2 2.4) (size 2.5 3.8) (layers F.Cu F.Paste F.Mask))
)

24
Cantor_Classic/libraries/kbd_footprints.pretty/USB_miniB_hirose_5ST_hand.kicad_mod Normal file
View File

@@ -0,0 +1,24 @@
(module USB_miniB_hirose_5ST_hand (layer F.Cu) (tedit 5485C0BC)
(descr "USB miniB hirose UX60SC_MB_5ST")
(tags "USB miniB hirose new")
(fp_text reference J1 (at 0 2.45) (layer F.SilkS)
(effects (font (size 0.8128 0.8128) (thickness 0.2032)))
)
(fp_text value USB_miniB (at 0 7.95) (layer F.SilkS) hide
(effects (font (thickness 0.3048)))
)
(fp_line (start -1 6.1) (end 1 6.1) (layer Dwgs.User) (width 0.2))
(fp_line (start -3.85 6.6) (end -3.85 5.7) (layer Dwgs.User) (width 0.2))
(fp_line (start 3.85 6.6) (end 3.85 5.7) (layer Dwgs.User) (width 0.2))
(fp_text user "PCB edge" (at -0.05 5.35) (layer F.SilkS) hide
(effects (font (size 0.5 0.5) (thickness 0.125)))
)
(fp_line (start -3.85 6.6) (end 3.85 6.6) (layer Dwgs.User) (width 0.2))
(pad 1 smd rect (at -1.6 0) (size 0.5 1.8) (layers F.Cu F.Paste F.Mask))
(pad 2 smd rect (at -0.8 0) (size 0.5 1.8) (layers F.Cu F.Paste F.Mask))
(pad 3 smd rect (at 0 0) (size 0.5 1.8) (layers F.Cu F.Paste F.Mask))
(pad 4 smd rect (at 0.8 0) (size 0.5 1.8) (layers F.Cu F.Paste F.Mask))
(pad 5 smd rect (at 1.6 0) (size 0.5 1.8) (layers F.Cu F.Paste F.Mask))
(pad 6 smd rect (at -4.2 2.4) (size 2.5 4.2) (layers F.Cu F.Paste F.Mask))
(pad 6 smd rect (at 4.2 2.4) (size 2.5 4.2) (layers F.Cu F.Paste F.Mask))
)

45
Cantor_Classic/libraries/kbd_footprints.pretty/WT12_bluegiga.kicad_mod Normal file
View File

@@ -0,0 +1,45 @@
(module 00Keyboard:WT12_bluegiga (layer F.Cu)
(tags "BlueGiga, WT12, Bluetooth")
(fp_text reference WT12_bluegiga (at 11.35 4.7) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value U** (at 11.25 7.85) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_circle (center 23.65 1.65) (end 24.2 1.2) (layer F.SilkS) (width 0.16))
(fp_line (start 0 0) (end 25.6 0) (layer F.SilkS) (width 0.16))
(fp_line (start 25.6 0) (end 25.6 14) (layer F.SilkS) (width 0.16))
(fp_line (start 25.6 14) (end 0 14) (layer F.SilkS) (width 0.16))
(fp_line (start 0 14) (end 0 0) (layer F.SilkS) (width 0.16))
(pad 14 smd oval (at 1 0.05) (size 0.8 1.7) (layers F.Cu F.Paste F.Mask))
(pad 1 smd oval (at 20.5 0.05) (size 0.8 1.7) (layers F.Cu F.Paste F.Mask))
(pad 2 smd oval (at 19 0.2) (size 0.8 2) (layers F.Cu F.Paste F.Mask))
(pad 3 smd oval (at 17.5 0.2) (size 0.8 2) (layers F.Cu F.Paste F.Mask))
(pad 4 smd oval (at 16 0.2) (size 0.8 2) (layers F.Cu F.Paste F.Mask))
(pad 5 smd oval (at 14.5 0.25) (size 0.8 2) (layers F.Cu F.Paste F.Mask))
(pad 6 smd oval (at 13 0.2) (size 0.8 2) (layers F.Cu F.Paste F.Mask))
(pad 7 smd oval (at 11.5 0.2) (size 0.8 2) (layers F.Cu F.Paste F.Mask))
(pad 8 smd oval (at 10 0.2) (size 0.8 2) (layers F.Cu F.Paste F.Mask))
(pad 9 smd oval (at 8.5 0.2) (size 0.8 2) (layers F.Cu F.Paste F.Mask))
(pad 10 smd oval (at 7 0.2) (size 0.8 2) (layers F.Cu F.Paste F.Mask))
(pad 11 smd oval (at 5.5 0.2) (size 0.8 2) (layers F.Cu F.Paste F.Mask))
(pad 12 smd oval (at 4 0.2) (size 0.8 2) (layers F.Cu F.Paste F.Mask))
(pad 13 smd oval (at 2.5 0.2) (size 0.8 2) (layers F.Cu F.Paste F.Mask))
(pad 15 smd oval (at 1 13.95) (size 0.8 1.7) (layers F.Cu F.Paste F.Mask))
(pad 16 smd oval (at 2.5 13.8) (size 0.8 2) (layers F.Cu F.Paste F.Mask))
(pad 17 smd oval (at 4 13.8) (size 0.8 2) (layers F.Cu F.Paste F.Mask))
(pad 18 smd oval (at 5.5 13.8) (size 0.8 2) (layers F.Cu F.Paste F.Mask))
(pad 19 smd oval (at 7 13.8) (size 0.8 2) (layers F.Cu F.Paste F.Mask))
(pad 20 smd oval (at 8.5 13.8) (size 0.8 2) (layers F.Cu F.Paste F.Mask))
(pad 21 smd oval (at 10 13.8) (size 0.8 2) (layers F.Cu F.Paste F.Mask))
(pad 22 smd oval (at 11.5 13.8) (size 0.8 2) (layers F.Cu F.Paste F.Mask))
(pad 23 smd oval (at 13 13.8) (size 0.8 2) (layers F.Cu F.Paste F.Mask))
(pad 24 smd oval (at 14.5 13.8) (size 0.8 2) (layers F.Cu F.Paste F.Mask))
(pad 25 smd oval (at 16 13.8) (size 0.8 2) (layers F.Cu F.Paste F.Mask))
(pad 26 smd oval (at 17.5 13.8) (size 0.8 2) (layers F.Cu F.Paste F.Mask))
(pad 27 smd oval (at 19 13.8) (size 0.8 2) (layers F.Cu F.Paste F.Mask))
(pad 28 smd oval (at 20.5 13.95) (size 0.8 1.7) (layers F.Cu F.Paste F.Mask))
(pad 29 smd oval (at 25.55 8.5) (size 1.7 0.8) (layers F.Cu F.Paste F.Mask))
(pad 30 smd oval (at 25.4 7) (size 2 0.8) (layers F.Cu F.Paste F.Mask))
(pad 31 smd oval (at 25.55 5.5) (size 1.7 0.8) (layers F.Cu F.Paste F.Mask))
)

16
Cantor_Classic/libraries/kbd_footprints.pretty/XTAL_HC_49_TH.kicad_mod Normal file
View File

@@ -0,0 +1,16 @@
(module XTAL_HC_49_TH (layer F.Cu) (tedit 5485623D)
(fp_text reference XTAL_HC_49_TH (at 0 -2.9) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value VAL** (at 0 3.15) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 2.8 -2.2) (end -2.8 -2.2) (layer F.SilkS) (width 0.15))
(fp_line (start -2.8 2.2) (end 2.8 2.2) (layer F.SilkS) (width 0.15))
(fp_arc (start -2.8 0) (end -2.8 2.2) (angle 90) (layer F.SilkS) (width 0.15))
(fp_arc (start -2.8 0) (end -5 0) (angle 90) (layer F.SilkS) (width 0.15))
(fp_arc (start 2.8 0) (end 2.8 -2.2) (angle 90) (layer F.SilkS) (width 0.15))
(fp_arc (start 2.8 0) (end 5 0) (angle 90) (layer F.SilkS) (width 0.15))
(pad 1 thru_hole circle (at 2.45 0 180) (size 1.4 1.4) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
(pad 2 thru_hole circle (at -2.45 0 180) (size 1.4 1.4) (drill 0.7) (layers *.Cu *.Mask F.SilkS))
)

108
Cantor_Classic/libraries/kbd_footprints.pretty/tmk2016.kicad_mod Normal file
View File

@@ -0,0 +1,108 @@
(module LOGO (layer F.Cu)
(at 0 0)
(fp_text reference "G***" (at 0 0) (layer F.SilkS) hide
(effects (font (thickness 0.3)))
)
(fp_text value "LOGO" (at 0.75 0) (layer F.SilkS) hide
(effects (font (thickness 0.3)))
)
(fp_poly (pts (xy 0.289907 2.440047) (xy 0.265335 2.628195) (xy 0.191811 2.841390) (xy 0.060727 3.050011) (xy -0.115259 3.242631) (xy -0.216854 3.323228) (xy -0.216854 2.233448) (xy -0.272223 2.054031)
(xy -0.312327 1.988296) (xy -0.430750 1.849343) (xy -0.540116 1.769276) (xy -0.635066 1.751487) (xy -0.668318 1.762840) (xy -0.754748 1.790177) (xy -0.839196 1.799167) (xy -0.956348 1.832502)
(xy -1.069026 1.924824) (xy -1.170275 2.064607) (xy -1.253143 2.240325) (xy -1.310676 2.440453) (xy -1.334399 2.620010) (xy -1.332111 2.826774) (xy -1.294629 2.982536) (xy -1.218162 3.099475)
(xy -1.172273 3.140918) (xy -1.075118 3.195669) (xy -0.970053 3.203091) (xy -0.837378 3.163361) (xy -0.793750 3.144338) (xy -0.648826 3.054100) (xy -0.499146 2.921797) (xy -0.367515 2.770310)
(xy -0.279356 2.628195) (xy -0.218930 2.430682) (xy -0.216854 2.233448) (xy -0.216854 3.323228) (xy -0.323484 3.407820) (xy -0.551289 3.534151) (xy -0.786013 3.610194) (xy -0.831352 3.618165)
(xy -1.040971 3.618907) (xy -1.259936 3.567078) (xy -1.459122 3.469714) (xy -1.583519 3.407345) (xy -1.670789 3.403597) (xy -1.767253 3.431036) (xy -1.864771 3.453124) (xy -1.973951 3.470914)
(xy -2.105403 3.485458) (xy -2.269734 3.497810) (xy -2.477552 3.509021) (xy -2.739467 3.520144) (xy -2.910416 3.526606) (xy -3.198417 3.538918) (xy -3.464287 3.553599) (xy -3.697079 3.569843)
(xy -3.885843 3.586849) (xy -4.019631 3.603811) (xy -4.056944 3.610762) (xy -4.297468 3.665205) (xy -4.474218 3.708908) (xy -4.592893 3.743433) (xy -4.659193 3.770343) (xy -4.672541 3.779519)
(xy -4.738968 3.803231) (xy -4.845279 3.807559) (xy -4.964008 3.794153) (xy -5.067691 3.764658) (xy -5.088819 3.754545) (xy -5.150595 3.710615) (xy -5.178873 3.650749) (xy -5.185826 3.548423)
(xy -5.185833 3.543183) (xy -5.176367 3.434867) (xy -5.150633 3.376593) (xy -5.141736 3.371548) (xy -5.012412 3.336584) (xy -4.839861 3.293724) (xy -4.650013 3.249047) (xy -4.468801 3.208630)
(xy -4.322155 3.178553) (xy -4.303889 3.175153) (xy -3.976390 3.081406) (xy -3.676695 2.923923) (xy -3.401557 2.700970) (xy -3.382323 2.682060) (xy -3.187048 2.464280) (xy -3.054951 2.260178)
(xy -2.981956 2.062094) (xy -2.963333 1.894684) (xy -2.975745 1.749604) (xy -3.019466 1.647853) (xy -3.104221 1.581521) (xy -3.239738 1.542695) (xy -3.418554 1.524413) (xy -3.740335 1.538104)
(xy -4.053748 1.618374) (xy -4.365567 1.767021) (xy -4.391574 1.782479) (xy -4.610852 1.935150) (xy -4.771279 2.091231) (xy -4.870654 2.246591) (xy -4.906774 2.397098) (xy -4.877437 2.538623)
(xy -4.833055 2.610556) (xy -4.783564 2.691768) (xy -4.763284 2.759245) (xy -4.793413 2.824066) (xy -4.868502 2.874434) (xy -4.955637 2.892778) (xy -5.047408 2.862534) (xy -5.153466 2.780244)
(xy -5.259976 2.658572) (xy -5.332632 2.547699) (xy -5.394724 2.427954) (xy -5.421421 2.338035) (xy -5.419701 2.251354) (xy -5.416107 2.229560) (xy -5.345415 2.027931) (xy -5.212470 1.830263)
(xy -5.025525 1.643224) (xy -4.792829 1.473484) (xy -4.522635 1.327712) (xy -4.223193 1.212577) (xy -4.121259 1.182950) (xy -3.982739 1.152086) (xy -3.839171 1.135353) (xy -3.667673 1.131053)
(xy -3.486259 1.135765) (xy -3.301267 1.145131) (xy -3.166675 1.158513) (xy -3.062329 1.179824) (xy -2.968072 1.212978) (xy -2.881100 1.253260) (xy -2.691953 1.367187) (xy -2.562346 1.497141)
(xy -2.481386 1.654958) (xy -2.466488 1.703757) (xy -2.441758 1.924203) (xy -2.476913 2.165654) (xy -2.568423 2.418188) (xy -2.712758 2.671882) (xy -2.892594 2.901598) (xy -3.074810 3.104445)
(xy -2.848221 3.104445) (xy -2.719072 3.106444) (xy -2.544368 3.111857) (xy -2.348979 3.119810) (xy -2.192285 3.127531) (xy -1.762937 3.150617) (xy -1.818911 3.016653) (xy -1.857798 2.868563)
(xy -1.874934 2.680541) (xy -1.870260 2.479790) (xy -1.843720 2.293515) (xy -1.820606 2.209482) (xy -1.779591 2.112214) (xy -1.717568 1.990970) (xy -1.643762 1.860871) (xy -1.567397 1.737035)
(xy -1.497697 1.634583) (xy -1.443887 1.568634) (xy -1.419613 1.552223) (xy -1.380459 1.529519) (xy -1.310094 1.471197) (xy -1.255024 1.419931) (xy -1.180244 1.350906) (xy -1.118422 1.311731)
(xy -1.045479 1.294454) (xy -0.937340 1.291124) (xy -0.867997 1.292106) (xy -0.659195 1.307385) (xy -0.487002 1.351144) (xy -0.329227 1.432802) (xy -0.163678 1.561777) (xy -0.103128 1.616729)
(xy 0.086332 1.817685) (xy 0.211970 2.013596) (xy 0.278317 2.216903) (xy 0.289907 2.440047) (xy 0.289907 2.440047) )(layer F.SilkS) (width 0.100000)
)
(fp_poly (pts (xy 2.493753 3.488424) (xy 2.465779 3.591997) (xy 2.380436 3.662841) (xy 2.298275 3.695770) (xy 2.241913 3.696702) (xy 2.174288 3.665684) (xy 2.169584 3.663095) (xy 2.044513 3.581492)
(xy 1.958584 3.488562) (xy 1.902718 3.367708) (xy 1.867836 3.202333) (xy 1.854347 3.086806) (xy 1.823178 2.768590) (xy 1.797465 2.515570) (xy 1.776215 2.322681) (xy 1.758434 2.184859)
(xy 1.743128 2.097041) (xy 1.729301 2.054161) (xy 1.715959 2.051156) (xy 1.702109 2.082960) (xy 1.686756 2.144511) (xy 1.677718 2.187223) (xy 1.637838 2.381250) (xy 1.466314 2.378705)
(xy 1.349124 2.369061) (xy 1.271555 2.336696) (xy 1.211840 2.279724) (xy 1.155642 2.196497) (xy 1.129187 2.122090) (xy 1.128889 2.116044) (xy 1.141925 2.039897) (xy 1.179642 1.904969)
(xy 1.239953 1.717760) (xy 1.320773 1.484768) (xy 1.411762 1.234723) (xy 1.463112 1.084383) (xy 1.503413 0.944109) (xy 1.526152 0.837425) (xy 1.528766 0.812152) (xy 1.536565 0.738539)
(xy 1.563378 0.698128) (xy 1.627905 0.675095) (xy 1.708104 0.660406) (xy 1.884567 0.652025) (xy 2.018029 0.691222) (xy 2.102569 0.776119) (xy 2.108202 0.787257) (xy 2.124382 0.847480)
(xy 2.146669 0.967159) (xy 2.173686 1.135592) (xy 2.204057 1.342078) (xy 2.236403 1.575914) (xy 2.269350 1.826399) (xy 2.301519 2.082831) (xy 2.331534 2.334509) (xy 2.358019 2.570731)
(xy 2.379595 2.780794) (xy 2.394887 2.953999) (xy 2.402277 3.073007) (xy 2.416065 3.202884) (xy 2.442917 3.319829) (xy 2.460036 3.364008) (xy 2.493753 3.488424) (xy 2.493753 3.488424) )(layer F.SilkS) (width 0.100000)
)
(fp_poly (pts (xy 5.137307 2.210668) (xy 5.133620 2.408556) (xy 5.065017 2.610554) (xy 4.930123 2.821712) (xy 4.822602 2.948591) (xy 4.646003 3.108387) (xy 4.646003 2.219939) (xy 4.642618 2.147743)
(xy 4.624503 2.077871) (xy 4.550020 1.933548) (xy 4.431340 1.843246) (xy 4.272327 1.809332) (xy 4.191649 1.812768) (xy 4.002571 1.854863) (xy 3.820359 1.943865) (xy 3.630316 2.087605)
(xy 3.565300 2.146580) (xy 3.468414 2.239997) (xy 3.413603 2.305682) (xy 3.390770 2.363405) (xy 3.389820 2.432937) (xy 3.394667 2.480717) (xy 3.438819 2.676255) (xy 3.519018 2.836916)
(xy 3.627252 2.948101) (xy 3.662636 2.968954) (xy 3.769301 3.004377) (xy 3.880665 2.998129) (xy 4.016788 2.947734) (xy 4.076644 2.917822) (xy 4.268986 2.786463) (xy 4.440870 2.612489)
(xy 4.567914 2.420740) (xy 4.571358 2.413789) (xy 4.623679 2.299585) (xy 4.646003 2.219939) (xy 4.646003 3.108387) (xy 4.591527 3.157681) (xy 4.339582 3.307183) (xy 4.074527 3.394347)
(xy 3.804118 3.416423) (xy 3.589771 3.385529) (xy 3.412361 3.313373) (xy 3.228641 3.191701) (xy 3.057281 3.036983) (xy 2.916949 2.865687) (xy 2.836812 2.721289) (xy 2.799138 2.564429)
(xy 2.791076 2.354287) (xy 2.811012 2.100847) (xy 2.857333 1.814098) (xy 2.928425 1.504026) (xy 3.022675 1.180618) (xy 3.138470 0.853859) (xy 3.138552 0.853649) (xy 3.218366 0.661653)
(xy 3.289414 0.528282) (xy 3.360291 0.443776) (xy 3.439593 0.398371) (xy 3.535917 0.382309) (xy 3.554085 0.381802) (xy 3.713974 0.401514) (xy 3.821559 0.460694) (xy 3.872355 0.551799)
(xy 3.861875 0.667286) (xy 3.795247 0.787285) (xy 3.744983 0.868904) (xy 3.683797 0.990125) (xy 3.619892 1.131635) (xy 3.561468 1.274123) (xy 3.516725 1.398276) (xy 3.493866 1.484781)
(xy 3.492500 1.500224) (xy 3.515021 1.546478) (xy 3.583074 1.539720) (xy 3.640441 1.513290) (xy 3.756316 1.473812) (xy 3.917972 1.447831) (xy 4.101549 1.437505) (xy 4.283189 1.444991)
(xy 4.331903 1.450775) (xy 4.572971 1.504867) (xy 4.763295 1.597746) (xy 4.915384 1.738826) (xy 5.041750 1.937523) (xy 5.077451 2.011837) (xy 5.137307 2.210668) (xy 5.137307 2.210668) )(layer F.SilkS) (width 0.100000)
)
(fp_poly (pts (xy -1.079932 -3.154171) (xy -1.116100 -3.067892) (xy -1.172006 -3.027229) (xy -1.218079 -3.024417) (xy -1.324944 -3.024126) (xy -1.482887 -3.026183) (xy -1.682195 -3.030420) (xy -1.913156 -3.036666)
(xy -2.160578 -3.044563) (xy -2.413990 -3.052350) (xy -2.646061 -3.057793) (xy -2.846901 -3.060795) (xy -3.006618 -3.061259) (xy -3.115319 -3.059090) (xy -3.162652 -3.054379) (xy -3.180285 -3.042473)
(xy -3.193520 -3.016688) (xy -3.202641 -2.968981) (xy -3.207932 -2.891310) (xy -3.209678 -2.775634) (xy -3.208162 -2.613911) (xy -3.203668 -2.398098) (xy -3.196481 -2.120154) (xy -3.196120 -2.106853)
(xy -3.188878 -1.850304) (xy -3.181571 -1.610032) (xy -3.174582 -1.397225) (xy -3.168292 -1.223074) (xy -3.163081 -1.098766) (xy -3.159790 -1.040694) (xy -3.154910 -0.951653) (xy -3.149713 -0.810747)
(xy -3.144791 -0.636664) (xy -3.140737 -0.448089) (xy -3.140424 -0.430413) (xy -3.134356 -0.245537) (xy -3.123626 -0.077409) (xy -3.109682 0.056771) (xy -3.093973 0.139804) (xy -3.091904 0.145873)
(xy -3.070610 0.222180) (xy -3.087298 0.275953) (xy -3.150509 0.338162) (xy -3.228359 0.396747) (xy -3.294533 0.413889) (xy -3.376971 0.391751) (xy -3.444968 0.360940) (xy -3.535833 0.297017)
(xy -3.600080 0.216995) (xy -3.600768 0.215596) (xy -3.618468 0.142911) (xy -3.635131 0.000760) (xy -3.650677 -0.209777) (xy -3.665021 -0.487617) (xy -3.676216 -0.776111) (xy -3.685100 -1.028026)
(xy -3.693825 -1.262628) (xy -3.701940 -1.468782) (xy -3.708998 -1.635355) (xy -3.714547 -1.751213) (xy -3.717535 -1.799166) (xy -3.721521 -1.877002) (xy -3.725590 -2.009776) (xy -3.729371 -2.181870)
(xy -3.732493 -2.377668) (xy -3.733715 -2.481844) (xy -3.739444 -3.041049) (xy -3.995208 -3.017715) (xy -4.154587 -3.003072) (xy -4.290294 -2.990246) (xy -4.417412 -2.977655) (xy -4.551018 -2.963719)
(xy -4.706194 -2.946856) (xy -4.898018 -2.925486) (xy -5.141572 -2.898026) (xy -5.203065 -2.891071) (xy -5.512890 -2.858945) (xy -5.764493 -2.839702) (xy -5.968909 -2.832754) (xy -6.137171 -2.837510)
(xy -6.165091 -2.839615) (xy -6.341806 -2.860413) (xy -6.458894 -2.892009) (xy -6.527141 -2.940714) (xy -6.557330 -3.012840) (xy -6.561667 -3.071686) (xy -6.556059 -3.136778) (xy -6.526148 -3.167564)
(xy -6.452302 -3.178200) (xy -6.411736 -3.179805) (xy -6.351288 -3.181945) (xy -6.291937 -3.184789) (xy -6.224996 -3.189119) (xy -6.141781 -3.195714) (xy -6.033604 -3.205357) (xy -5.891780 -3.218828)
(xy -5.707622 -3.236908) (xy -5.472445 -3.260378) (xy -5.177561 -3.290019) (xy -5.108020 -3.297022) (xy -4.776297 -3.330441) (xy -4.507321 -3.357634) (xy -4.293641 -3.379466) (xy -4.127808 -3.396803)
(xy -4.002369 -3.410511) (xy -3.909873 -3.421455) (xy -3.842871 -3.430499) (xy -3.793912 -3.438510) (xy -3.755543 -3.446354) (xy -3.720315 -3.454894) (xy -3.696669 -3.460948) (xy -3.587739 -3.479151)
(xy -3.493955 -3.479426) (xy -3.485002 -3.477901) (xy -3.429346 -3.472804) (xy -3.313174 -3.466825) (xy -3.146519 -3.460317) (xy -2.939409 -3.453633) (xy -2.701875 -3.447125) (xy -2.443948 -3.441147)
(xy -2.434166 -3.440941) (xy -2.089581 -3.432442) (xy -1.808957 -3.422226) (xy -1.585702 -3.409371) (xy -1.413227 -3.392958) (xy -1.284941 -3.372066) (xy -1.194253 -3.345776) (xy -1.134573 -3.313167)
(xy -1.099310 -3.273319) (xy -1.089829 -3.253247) (xy -1.079932 -3.154171) (xy -1.079932 -3.154171) )(layer F.SilkS) (width 0.100000)
)
(fp_poly (pts (xy 2.589517 -0.405694) (xy 2.581994 -0.328937) (xy 2.538872 -0.296391) (xy 2.492111 -0.288332) (xy 2.338707 -0.301372) (xy 2.214644 -0.378417) (xy 2.127775 -0.504421) (xy 2.039403 -0.724041)
(xy 1.957764 -0.998839) (xy 1.886252 -1.313518) (xy 1.828259 -1.652780) (xy 1.787180 -2.001327) (xy 1.781854 -2.063750) (xy 1.760034 -2.301538) (xy 1.736507 -2.470098) (xy 1.728611 -2.498553)
(xy 1.728611 -2.663472) (xy 1.710972 -2.681111) (xy 1.693334 -2.663472) (xy 1.710972 -2.645833) (xy 1.728611 -2.663472) (xy 1.728611 -2.498553) (xy 1.708576 -2.570751) (xy 1.673544 -2.604815)
(xy 1.628714 -2.573613) (xy 1.571389 -2.478464) (xy 1.498874 -2.320689) (xy 1.457631 -2.222500) (xy 1.362914 -1.995812) (xy 1.287366 -1.823920) (xy 1.224895 -1.695742) (xy 1.169410 -1.600194)
(xy 1.114820 -1.526195) (xy 1.055033 -1.462661) (xy 1.024281 -1.434054) (xy 0.845062 -1.309867) (xy 0.654687 -1.252956) (xy 0.449871 -1.263198) (xy 0.227326 -1.340470) (xy 0.115313 -1.400119)
(xy -0.010422 -1.495182) (xy -0.147633 -1.632712) (xy -0.277779 -1.791321) (xy -0.382320 -1.949623) (xy -0.414113 -2.010833) (xy -0.471778 -2.134305) (xy -0.486378 -2.028472) (xy -0.490243 -1.961215)
(xy -0.492408 -1.836164) (xy -0.492850 -1.666062) (xy -0.491543 -1.463651) (xy -0.488461 -1.241673) (xy -0.487975 -1.214557) (xy -0.482770 -0.968205) (xy -0.476751 -0.782000) (xy -0.468898 -0.645534)
(xy -0.458189 -0.548400) (xy -0.443601 -0.480189) (xy -0.424114 -0.430493) (xy -0.408322 -0.403168) (xy -0.349472 -0.324396) (xy -0.297082 -0.273402) (xy -0.294308 -0.271649) (xy -0.254667 -0.211315)
(xy -0.251602 -0.116532) (xy -0.283127 -0.011940) (xy -0.320060 0.048160) (xy -0.417375 0.129224) (xy -0.527492 0.141079) (xy -0.650606 0.083697) (xy -0.756035 -0.009403) (xy -0.824028 -0.090756)
(xy -0.878889 -0.183651) (xy -0.921922 -0.296145) (xy -0.954429 -0.436294) (xy -0.977711 -0.612154) (xy -0.993071 -0.831780) (xy -1.001810 -1.103228) (xy -1.005232 -1.434554) (xy -1.005416 -1.552222)
(xy -1.000527 -1.995243) (xy -0.986003 -2.378170) (xy -0.962057 -2.699352) (xy -0.928905 -2.957139) (xy -0.886761 -3.149880) (xy -0.835839 -3.275924) (xy -0.776353 -3.333621) (xy -0.773931 -3.334441)
(xy -0.717787 -3.380018) (xy -0.705555 -3.420547) (xy -0.682122 -3.482917) (xy -0.607845 -3.513077) (xy -0.476756 -3.512822) (xy -0.420018 -3.506369) (xy -0.313123 -3.484256) (xy -0.237993 -3.443252)
(xy -0.187737 -3.371586) (xy -0.155462 -3.257486) (xy -0.134277 -3.089181) (xy -0.127574 -3.006852) (xy -0.092685 -2.717534) (xy -0.034792 -2.448573) (xy 0.042304 -2.208137) (xy 0.134800 -2.004396)
(xy 0.238892 -1.845517) (xy 0.350777 -1.739671) (xy 0.466653 -1.695026) (xy 0.483566 -1.694117) (xy 0.566722 -1.726348) (xy 0.659148 -1.819046) (xy 0.754331 -1.963908) (xy 0.845756 -2.152634)
(xy 0.848529 -2.159261) (xy 0.916287 -2.318089) (xy 0.992316 -2.490684) (xy 1.038678 -2.592916) (xy 1.097569 -2.720767) (xy 1.173314 -2.885577) (xy 1.253416 -3.060145) (xy 1.289884 -3.139722)
(xy 1.380503 -3.331202) (xy 1.453881 -3.466403) (xy 1.518411 -3.554778) (xy 1.582484 -3.605783) (xy 1.654492 -3.628872) (xy 1.728261 -3.633611) (xy 1.837962 -3.625289) (xy 1.926151 -3.604669)
(xy 1.940009 -3.598477) (xy 2.004339 -3.530310) (xy 2.067756 -3.400007) (xy 2.128150 -3.215980) (xy 2.183409 -2.986638) (xy 2.231423 -2.720392) (xy 2.270081 -2.425652) (xy 2.290966 -2.200127)
(xy 2.333294 -1.770370) (xy 2.390328 -1.384211) (xy 2.460313 -1.052794) (xy 2.487340 -0.952500) (xy 2.553643 -0.687719) (xy 2.585919 -0.468989) (xy 2.589517 -0.405694) (xy 2.589517 -0.405694) )(layer F.SilkS) (width 0.100000)
)
(fp_poly (pts (xy 6.084519 -0.266973) (xy 6.065132 -0.184647) (xy 5.987729 -0.133722) (xy 5.974062 -0.129454) (xy 5.919570 -0.117456) (xy 5.872782 -0.123134) (xy 5.820133 -0.154907) (xy 5.748063 -0.221195)
(xy 5.643007 -0.330417) (xy 5.632631 -0.341411) (xy 5.543986 -0.432567) (xy 5.454518 -0.517214) (xy 5.355654 -0.601801) (xy 5.238824 -0.692781) (xy 5.095453 -0.796603) (xy 4.916971 -0.919718)
(xy 4.694806 -1.068578) (xy 4.462639 -1.221863) (xy 4.293830 -1.335000) (xy 4.137373 -1.443764) (xy 4.006948 -1.538362) (xy 3.916236 -1.609005) (xy 3.892423 -1.629979) (xy 3.816568 -1.689739)
(xy 3.756685 -1.715011) (xy 3.741917 -1.712500) (xy 3.714901 -1.675509) (xy 3.717441 -1.664437) (xy 3.728041 -1.619276) (xy 3.741556 -1.524930) (xy 3.754052 -1.411620) (xy 3.780977 -1.212140)
(xy 3.822035 -1.003422) (xy 3.872833 -0.801051) (xy 3.928973 -0.620616) (xy 3.986060 -0.477703) (xy 4.039698 -0.387900) (xy 4.044122 -0.383043) (xy 4.111074 -0.282198) (xy 4.121633 -0.206654)
(xy 4.102303 -0.151547) (xy 4.051203 -0.124010) (xy 3.964803 -0.112862) (xy 3.868674 -0.113470) (xy 3.794280 -0.140762) (xy 3.711932 -0.207296) (xy 3.688480 -0.229727) (xy 3.554044 -0.400924)
(xy 3.440104 -0.634033) (xy 3.346453 -0.930062) (xy 3.272879 -1.290018) (xy 3.219174 -1.714910) (xy 3.185127 -2.205744) (xy 3.170987 -2.716388) (xy 3.164703 -2.977124) (xy 3.152282 -3.237320)
(xy 3.134835 -3.485301) (xy 3.113476 -3.709395) (xy 3.089316 -3.897927) (xy 3.063467 -4.039223) (xy 3.037111 -4.121480) (xy 3.017613 -4.207440) (xy 3.023285 -4.267150) (xy 3.041410 -4.313343)
(xy 3.076946 -4.333876) (xy 3.149388 -4.334276) (xy 3.230139 -4.325815) (xy 3.373960 -4.305637) (xy 3.463932 -4.280646) (xy 3.516649 -4.242004) (xy 3.548702 -4.180872) (xy 3.558630 -4.150838)
(xy 3.580462 -4.051203) (xy 3.604065 -3.894391) (xy 3.627987 -3.693707) (xy 3.650777 -3.462454) (xy 3.670986 -3.213940) (xy 3.685958 -2.983128) (xy 3.695889 -2.833314) (xy 3.706729 -2.711866)
(xy 3.716899 -2.634704) (xy 3.722370 -2.615870) (xy 3.758707 -2.623160) (xy 3.850209 -2.653259) (xy 3.986654 -2.702464) (xy 4.157821 -2.767076) (xy 4.353488 -2.843395) (xy 4.380994 -2.854302)
(xy 4.649469 -2.958659) (xy 4.864708 -3.035905) (xy 5.037597 -3.088361) (xy 5.179022 -3.118347) (xy 5.299870 -3.128184) (xy 5.411028 -3.120193) (xy 5.520972 -3.097324) (xy 5.625546 -3.066329)
(xy 5.679766 -3.032977) (xy 5.702405 -2.980778) (xy 5.708750 -2.932389) (xy 5.708458 -2.842959) (xy 5.692409 -2.785831) (xy 5.690377 -2.783488) (xy 5.641420 -2.765267) (xy 5.545053 -2.748551)
(xy 5.449683 -2.739145) (xy 5.284412 -2.711891) (xy 5.071530 -2.652026) (xy 4.823512 -2.563924) (xy 4.552830 -2.451955) (xy 4.313444 -2.340890) (xy 4.196828 -2.279194) (xy 4.114077 -2.220357)
(xy 4.068184 -2.159902) (xy 4.062143 -2.093348) (xy 4.098948 -2.016217) (xy 4.181593 -1.924030) (xy 4.313070 -1.812309) (xy 4.496373 -1.676575) (xy 4.734497 -1.512348) (xy 4.974167 -1.352351)
(xy 5.276481 -1.145112) (xy 5.521546 -0.960724) (xy 5.716506 -0.793206) (xy 5.868505 -0.636573) (xy 5.948572 -0.536514) (xy 6.045721 -0.383371) (xy 6.084519 -0.266973) (xy 6.084519 -0.266973) )(layer F.SilkS) (width 0.100000)
)
)

69
Cantor_Classic/libraries/kbd_footprints.pretty/tmk_logo.kicad_mod Normal file
View File

@@ -0,0 +1,69 @@
(module LOGO (layer F.Cu)
(at 0 0)
(fp_text reference "G***" (at 0 0) (layer F.SilkS) hide
(effects (font (thickness 0.3)))
)
(fp_text value "LOGO" (at 0.75 0) (layer F.SilkS) hide
(effects (font (thickness 0.3)))
)
(fp_poly (pts (xy -2.659352 -1.460343) (xy -2.382834 -1.456498) (xy -2.110477 -1.450620) (xy -1.854720 -1.442884) (xy -1.628005 -1.433465) (xy -1.442774 -1.422539) (xy -1.311468 -1.410280) (xy -1.306314 -1.409605)
(xy -1.151621 -1.385525) (xy -1.053380 -1.358573) (xy -0.997627 -1.321465) (xy -0.970398 -1.266917) (xy -0.963078 -1.230580) (xy -0.957642 -1.182041) (xy -0.962546 -1.143709) (xy -0.984896 -1.114600)
(xy -1.031800 -1.093730) (xy -1.110363 -1.080112) (xy -1.227694 -1.072764) (xy -1.390899 -1.070699) (xy -1.607084 -1.072934) (xy -1.883358 -1.078484) (xy -2.035785 -1.081953) (xy -2.346753 -1.088386)
(xy -2.593220 -1.091690) (xy -2.781180 -1.091753) (xy -2.916622 -1.088464) (xy -3.005539 -1.081709) (xy -3.053922 -1.071379) (xy -3.066450 -1.062730) (xy -3.073475 -1.016430) (xy -3.078553 -0.911298)
(xy -3.081764 -0.759032) (xy -3.083187 -0.571325) (xy -3.082902 -0.359874) (xy -3.080991 -0.136375) (xy -3.077532 0.087478) (xy -3.072605 0.299989) (xy -3.066292 0.489462) (xy -3.058672 0.644202)
(xy -3.054343 0.705555) (xy -3.046260 0.822948) (xy -3.036615 0.991732) (xy -3.026407 1.192791) (xy -3.016638 1.407006) (xy -3.012785 1.499305) (xy -3.003116 1.697599) (xy -2.991356 1.875897)
(xy -2.978671 2.020065) (xy -2.966227 2.115968) (xy -2.959636 2.143757) (xy -2.951239 2.222311) (xy -2.999244 2.293688) (xy -3.104481 2.353920) (xy -3.231268 2.348105) (xy -3.318167 2.311699)
(xy -3.401863 2.241383) (xy -3.450961 2.169237) (xy -3.464934 2.104453) (xy -3.479374 1.972312) (xy -3.494127 1.776009) (xy -3.509039 1.518740) (xy -3.523955 1.203700) (xy -3.538721 0.834085)
(xy -3.553183 0.413091) (xy -3.567186 -0.056088) (xy -3.577699 -0.453767) (xy -3.584284 -0.649346) (xy -3.593218 -0.820200) (xy -3.603594 -0.953853) (xy -3.614509 -1.037834) (xy -3.621711 -1.060141)
(xy -3.666381 -1.067621) (xy -3.766263 -1.066509) (xy -3.906615 -1.057435) (xy -4.072698 -1.041027) (xy -4.074583 -1.040811) (xy -4.536968 -0.989134) (xy -4.934360 -0.947598) (xy -5.271552 -0.915933)
(xy -5.553333 -0.893865) (xy -5.784495 -0.881124) (xy -5.969828 -0.877438) (xy -6.114123 -0.882534) (xy -6.222172 -0.896141) (xy -6.291295 -0.915022) (xy -6.351565 -0.963192) (xy -6.392604 -1.039132)
(xy -6.405101 -1.116158) (xy -6.379743 -1.167587) (xy -6.379482 -1.167749) (xy -6.332530 -1.177903) (xy -6.230101 -1.189817) (xy -6.087198 -1.202021) (xy -5.918825 -1.213045) (xy -5.915275 -1.213245)
(xy -5.720873 -1.225835) (xy -5.526604 -1.241297) (xy -5.357521 -1.257487) (xy -5.256389 -1.269639) (xy -5.139264 -1.284559) (xy -4.970899 -1.303932) (xy -4.770309 -1.325665) (xy -4.556506 -1.347669)
(xy -4.462639 -1.356947) (xy -4.249062 -1.378316) (xy -4.040286 -1.400190) (xy -3.855323 -1.420510) (xy -3.713182 -1.437216) (xy -3.668889 -1.442920) (xy -3.558193 -1.451876) (xy -3.389449 -1.457920)
(xy -3.175101 -1.461229) (xy -2.927588 -1.461978) (xy -2.659352 -1.460343) )(layer F.SilkS) (width 0.010000)
)
(fp_poly (pts (xy 1.849740 -1.648560) (xy 1.917513 -1.639342) (xy 2.033221 -1.613324) (xy 2.105845 -1.568806) (xy 2.153964 -1.505142) (xy 2.205824 -1.388073) (xy 2.257470 -1.213482) (xy 2.306219 -0.994363)
(xy 2.349383 -0.743706) (xy 2.384279 -0.474502) (xy 2.399460 -0.317500) (xy 2.416668 -0.124434) (xy 2.435226 0.065315) (xy 2.452774 0.228563) (xy 2.465643 0.332870) (xy 2.478581 0.457752)
(xy 2.481730 0.562108) (xy 2.477009 0.609884) (xy 2.477324 0.675785) (xy 2.493356 0.700347) (xy 2.516315 0.743147) (xy 2.549434 0.838777) (xy 2.588711 0.971400) (xy 2.630142 1.125181)
(xy 2.669727 1.284285) (xy 2.703460 1.432876) (xy 2.727341 1.555119) (xy 2.737365 1.635178) (xy 2.735028 1.656437) (xy 2.675342 1.689544) (xy 2.570842 1.682200) (xy 2.458038 1.645294)
(xy 2.359891 1.568080) (xy 2.268194 1.421965) (xy 2.183357 1.208345) (xy 2.105794 0.928614) (xy 2.035917 0.584169) (xy 1.974139 0.176406) (xy 1.940166 -0.106854) (xy 1.917693 -0.313876)
(xy 1.898138 -0.497593) (xy 1.882732 -0.646127) (xy 1.872709 -0.747600) (xy 1.869297 -0.789487) (xy 1.855259 -0.788902) (xy 1.819118 -0.738810) (xy 1.768901 -0.653501) (xy 1.712636 -0.547265)
(xy 1.658349 -0.434394) (xy 1.621515 -0.348360) (xy 1.499752 -0.055072) (xy 1.390225 0.177406) (xy 1.287945 0.356686) (xy 1.187921 0.490379) (xy 1.085164 0.586094) (xy 0.974683 0.651444)
(xy 0.962452 0.656845) (xy 0.769212 0.703110) (xy 0.566141 0.685432) (xy 0.361011 0.608193) (xy 0.161592 0.475777) (xy -0.024344 0.292564) (xy -0.189026 0.062938) (xy -0.235429 -0.018629)
(xy -0.345202 -0.223204) (xy -0.370843 0.152981) (xy -0.380002 0.386193) (xy -0.379347 0.648595) (xy -0.369814 0.917246) (xy -0.352343 1.169204) (xy -0.327872 1.381527) (xy -0.318195 1.440221)
(xy -0.270623 1.579404) (xy -0.194361 1.692985) (xy -0.133587 1.764515) (xy -0.116825 1.823859) (xy -0.135704 1.906098) (xy -0.140211 1.919909) (xy -0.206331 2.044730) (xy -0.301068 2.105063)
(xy -0.424509 2.100949) (xy -0.477558 2.083068) (xy -0.575833 2.008959) (xy -0.665798 1.876457) (xy -0.742839 1.697631) (xy -0.802342 1.484545) (xy -0.839693 1.249267) (xy -0.849257 1.111106)
(xy -0.858163 0.741316) (xy -0.858439 0.381013) (xy -0.850701 0.037093) (xy -0.835564 -0.283549) (xy -0.813644 -0.574016) (xy -0.785556 -0.827414) (xy -0.751916 -1.036847) (xy -0.713339 -1.195420)
(xy -0.670441 -1.296236) (xy -0.631240 -1.331317) (xy -0.576323 -1.374897) (xy -0.549121 -1.432084) (xy -0.501052 -1.498001) (xy -0.398314 -1.525352) (xy -0.238878 -1.514472) (xy -0.151476 -1.497928)
(xy -0.120806 -1.490726) (xy -0.097986 -1.477472) (xy -0.080202 -1.447645) (xy -0.064643 -1.390722) (xy -0.048498 -1.296184) (xy -0.028954 -1.153509) (xy -0.003200 -0.952175) (xy -0.000996 -0.934861)
(xy 0.057624 -0.597842) (xy 0.140930 -0.302901) (xy 0.246026 -0.056577) (xy 0.370018 0.134593) (xy 0.510012 0.264073) (xy 0.537164 0.280591) (xy 0.608892 0.312954) (xy 0.664433 0.304090)
(xy 0.724108 0.263859) (xy 0.775942 0.216621) (xy 0.829069 0.148910) (xy 0.888388 0.051890) (xy 0.958800 -0.083275) (xy 1.045205 -0.265419) (xy 1.152503 -0.503377) (xy 1.163943 -0.529167)
(xy 1.246481 -0.715463) (xy 1.331519 -0.907447) (xy 1.408041 -1.080243) (xy 1.456785 -1.190349) (xy 1.523782 -1.329961) (xy 1.594378 -1.458489) (xy 1.654197 -1.549920) (xy 1.658499 -1.555363)
(xy 1.717159 -1.620627) (xy 1.771383 -1.648605) (xy 1.849740 -1.648560) )(layer F.SilkS) (width 0.010000)
)
(fp_poly (pts (xy 3.497073 -2.310604) (xy 3.629196 -2.261996) (xy 3.660205 -2.241104) (xy 3.681111 -2.191870) (xy 3.703717 -2.082020) (xy 3.726869 -1.921435) (xy 3.749414 -1.719997) (xy 3.770196 -1.487588)
(xy 3.788063 -1.234089) (xy 3.797379 -1.066462) (xy 3.805871 -0.870866) (xy 3.815071 -0.737491) (xy 3.834724 -0.658585) (xy 3.874577 -0.626395) (xy 3.944375 -0.633169) (xy 4.053864 -0.671154)
(xy 4.212790 -0.732596) (xy 4.215694 -0.733693) (xy 4.336881 -0.779085) (xy 4.430250 -0.813473) (xy 4.478087 -0.830346) (xy 4.480278 -0.830973) (xy 4.541787 -0.853043) (xy 4.663081 -0.903909)
(xy 4.823469 -0.974444) (xy 4.945118 -1.025306) (xy 5.056233 -1.066201) (xy 5.105691 -1.081172) (xy 5.195205 -1.095989) (xy 5.311340 -1.105435) (xy 5.434180 -1.109283) (xy 5.543812 -1.107307)
(xy 5.620322 -1.099281) (xy 5.644444 -1.087289) (xy 5.670158 -1.072058) (xy 5.688542 -1.076086) (xy 5.749384 -1.069238) (xy 5.795158 -1.044059) (xy 5.835844 -0.980204) (xy 5.822667 -0.907371)
(xy 5.768481 -0.839551) (xy 5.686135 -0.790734) (xy 5.588480 -0.774910) (xy 5.552499 -0.779883) (xy 5.492678 -0.780578) (xy 5.399438 -0.769619) (xy 5.296408 -0.751419) (xy 5.207212 -0.730388)
(xy 5.155478 -0.710938) (xy 5.150555 -0.704835) (xy 5.120528 -0.677835) (xy 5.054083 -0.653714) (xy 4.985595 -0.629289) (xy 4.869904 -0.580540) (xy 4.723025 -0.514474) (xy 4.560971 -0.438099)
(xy 4.556895 -0.436133) (xy 4.391251 -0.355298) (xy 4.279779 -0.297073) (xy 4.212743 -0.254173) (xy 4.180407 -0.219313) (xy 4.173033 -0.185206) (xy 4.178677 -0.153122) (xy 4.230159 -0.034770)
(xy 4.314991 0.086046) (xy 4.402779 0.169412) (xy 4.469470 0.215915) (xy 4.560934 0.280397) (xy 4.586111 0.298247) (xy 4.689042 0.367634) (xy 4.816734 0.448854) (xy 4.889845 0.493391)
(xy 4.999939 0.564369) (xy 5.092398 0.633231) (xy 5.132632 0.669963) (xy 5.202587 0.727463) (xy 5.305010 0.790804) (xy 5.348422 0.813247) (xy 5.462773 0.881964) (xy 5.563853 0.964328)
(xy 5.588427 0.990526) (xy 5.653753 1.057419) (xy 5.705379 1.092212) (xy 5.712722 1.093611) (xy 5.748941 1.112897) (xy 5.750379 1.120069) (xy 5.776978 1.155206) (xy 5.842276 1.207429)
(xy 5.856418 1.217083) (xy 5.962083 1.318512) (xy 6.004579 1.435914) (xy 6.002969 1.483383) (xy 6.021525 1.542850) (xy 6.077161 1.614817) (xy 6.084402 1.621825) (xy 6.157578 1.708821)
(xy 6.165002 1.770848) (xy 6.106723 1.808396) (xy 6.103024 1.809396) (xy 6.021893 1.795959) (xy 5.966597 1.744151) (xy 5.914220 1.692070) (xy 5.878972 1.682272) (xy 5.878433 1.682770)
(xy 5.858207 1.676113) (xy 5.854996 1.655115) (xy 5.824562 1.580853) (xy 5.746948 1.492441) (xy 5.638558 1.406315) (xy 5.560197 1.359768) (xy 5.455760 1.292885) (xy 5.368417 1.215731)
(xy 5.355888 1.201018) (xy 5.304838 1.144808) (xy 5.274753 1.127750) (xy 5.273566 1.128889) (xy 5.239189 1.123376) (xy 5.165869 1.087723) (xy 5.072049 1.032838) (xy 4.976172 0.969631)
(xy 4.896679 0.909012) (xy 4.885938 0.899583) (xy 4.807812 0.841425) (xy 4.698653 0.774348) (xy 4.643421 0.744402) (xy 4.534373 0.684086) (xy 4.442752 0.626260) (xy 4.412037 0.603291)
(xy 4.303012 0.511980) (xy 4.235166 0.457598) (xy 4.196265 0.430976) (xy 4.174075 0.422944) (xy 4.171194 0.422769) (xy 4.131168 0.400998) (xy 4.060539 0.346721) (xy 4.025705 0.316936)
(xy 3.947333 0.253352) (xy 3.889119 0.215897) (xy 3.875775 0.211666) (xy 3.850268 0.243393) (xy 3.842892 0.330544) (xy 3.851137 0.461072) (xy 3.872495 0.622932) (xy 3.904457 0.804077)
(xy 3.944516 0.992462) (xy 3.990162 1.176040) (xy 4.038888 1.342765) (xy 4.088185 1.480592) (xy 4.135545 1.577474) (xy 4.168199 1.615958) (xy 4.220528 1.686390) (xy 4.233333 1.744246)
(xy 4.217895 1.805649) (xy 4.158743 1.836015) (xy 4.121679 1.842823) (xy 4.029973 1.841229) (xy 3.948016 1.796890) (xy 3.904780 1.758633) (xy 3.833337 1.695696) (xy 3.782704 1.660647)
(xy 3.774308 1.658055) (xy 3.744862 1.627340) (xy 3.700804 1.546514) (xy 3.649367 1.432552) (xy 3.597785 1.302433) (xy 3.553290 1.173132) (xy 3.526310 1.075972) (xy 3.495283 0.943599)
(xy 3.465127 0.816839) (xy 3.455287 0.776111) (xy 3.420510 0.598899) (xy 3.391799 0.375325) (xy 3.368697 0.099674) (xy 3.350746 -0.233772) (xy 3.337489 -0.630728) (xy 3.335247 -0.723195)
(xy 3.323391 -1.097874) (xy 3.305556 -1.415993) (xy 3.280399 -1.691397) (xy 3.246579 -1.937928) (xy 3.202754 -2.169430) (xy 3.188993 -2.231320) (xy 3.179354 -2.290054) (xy 3.196777 -2.318468)
(xy 3.257481 -2.327565) (xy 3.331956 -2.328334) (xy 3.497073 -2.310604) )(layer F.SilkS) (width 0.010000)
)
)