add newsraft

Still not rebuilding on changes to $dir/$dir/$file.md.

Makefile

@@ -4,51 +4,63 @@ EDITOR ?= vi
 FZF != command -v sk || command -v fzy || command -v fzf || \
 	{ echo install a fuzzy finder && exit 1 ;}
 
-help: ## Print the help message
+spill_contents = sed -e '1,/---/d'
+
+help: .git/info/exclude ## Print the help message
 	@awk 'BEGIN {FS = ":.*?## "} /^[0-9a-zA-Z._-]+:.*?## / {printf "\033[36m%s\033[0m : %s\n", $$1, $$2}' $(MAKEFILE_LIST) | \
 		sort | \
 		column -s ':' -t
 
 articles != find * -type f -name "*.md"
 
-categories != ls -d */
+dirs != ls -d */
+categories = $(patsubst %/, %, $(dirs))
 
-databases = $(patsubst %/, .dbs/%.rec, $(categories))
+databases = $(patsubst %, .dbs/%.rec, $(categories))
 
 default += $(databases)
+default += db.rec
+default += .dbs/map.fmt
+
+$(foreach dir, $(categories), \
+	$(eval .dbs/$(dir).rec: $(wildcard $(dir)/*)) \
+	)
+
+.dbs/:
+	mkdir $@
 
 $(databases): .dbs/%.rec: %/ | .dbs/
 	$(info making $(@F))
-	mkdir -p $(@D)
 	for entry in $(shell find $< -type f -name "*.md") ; do \
-		sed -n '2,/^---$$/ {/^---$$/d; p}' "$$entry" |\
+		printf "file: %s\n" "$$entry" ;\
-		sed -e 's/\[ //'  -e 's/ \]//' |\
+		sed -n '2,/^---$$/ {/^---$$/d; p}' "$$entry"  |\
-		tr -d '"' ;\
+		tr -d '[]' | tr -s ' ' |\
-		printf "wordcount: %s\n" "$$(wc -w < $$entry)" ;\
+		sed '/tags: /s/, /\ntag: /g ; s/tags:/tag:/ ; /requires/s/, /\nrequires: /g' ;\
-		printf "file: %s\n\n" "$$entry" ;\
+		printf "wordcount: %s\n\n" "$$(wc -w < $$entry)" ;\
-	done >> $@
+	done > $@
-	for entry in $(shell find $< -type f -name "*.md"); do \
-		recset $@ -e "file = '$${entry}'" -f wordcount --set-add="$$(wc -w < $${entry})" ;\
-	done
 
+# This two-variable read can only happen because of the quotes in the titles.
 db.rec: $(databases)
+	$(info rebuilding from $? )
 	printf '%s\n' '%rec: guide' > $@
+	printf '%s\n' '%key: title' >> $@
+	printf '%s\n' '%type: requires rec guide' >> $@
+	printf '%s\n' '%type: provides rec guide' >> $@
 	printf '%s\n' '%type: wordcount int' >> $@
-	printf '%s\n\n' '%sort: title' >> $@
+	printf '%s\n\n' '%sort: wordcount' >> $@
 	cat $^ >> $@
 	recsel $@ -e "requires != ''" -CR title,requires |\
 	while read title requires; do \
-		IFS=', ' && for provider in $$requires; do \
+		for provider in "$$requires" ; do \
 			recset $@ -e "title = '$${provider}'" -f provides -a "$${title}" ;\
 		done ;\
 	done
-	$(info Created main database: $@)
+	sed -i 's/"//g' $@
 	recfix --sort $@
-
+	$(info Created main database: $@)
-default += db.rec
 
 .git/info/exclude: $(default)
-	echo $^ | tr ' ' '\n' > $@
+	@echo $^ | tr ' ' '\n' > $@
 
 default += .git/info/exclude
 
@@ -62,10 +74,22 @@ article: ## Write an article
 	filename="$$(echo "$$title" | tr '[:upper:]' '[:lower:]' | tr ' ' '_')" ;\
 	printf '%s\n' '---' >> $$path/$$filename.md ;\
 	printf 'title: "%s"\n' "$$title" >> $$path/$$filename.md ;\
-	printf 'tags: [ "%s" ]\n' "$$path" | sed 's#\/#", "#g' >> $$path/$$filename.md ;\
+	printf 'tags: [ "%s" ]\n' "$$path" | tr '[:upper:]' '[:lower:]' | sed 's#\/#", "#g' >> $$path/$$filename.md ;\
 	printf '%s\n\n' '---' >> $$path/$$filename.md ;\
 	$(EDITOR) +5 "$$path/$$filename.md"
 
+.dbs/map.fmt:| .dbs/
+	printf '%s\n' '[ {{requires[0]}} ] --> [ {{title}} ] {border-style: dashed;}' > $@
+	printf '%s\n' '[ {{requires[1]}} ] --> [ {{title}} ] {border-style: dashed;}' >> $@
+	printf '%s\n' '[ {{requires[2]}} ] --> [ {{title}} ] {border-style: dashed;}' >> $@
+	printf '%s\n' '[ {{requires[3]}} ] --> [ {{title}} ] {border-style: dashed;}' >> $@
+	printf '%s\n' '[ {{requires[4]}} ] --> [ {{title}} ] {border-style: dashed;}' >> $@
+
+.PHONY: map
+map: db.rec .dbs/map.fmt ## Show knowledge dependency map
+	recsel -t guide $< -e 'requires != ""' -p title,requires | recfmt -f .dbs/map.fmt |\
+	grep -vF '[  ]' | graph-easy --boxart | $${PAGER}
+
 .PHONY: clean
 clean: ## Remove all generated files
 	$(RM) $(default)

README.md

@@ -4,22 +4,29 @@ title: "Linux Knowledge Base"
 
 The Linux Knowledge-Base provides quick-start guides for working with terminal programs.
 
+If you like this style of short articles with a miniature database, then join me in my quest to remove the nausea of poorly-written documentation.
+
 # Setup
 
 Install `make`, `recutils`, and any fuzzy-finder (i.e. `sk`, `fzy`, or `fzf`).
 
 ## Usage
 
+Set up the database and try a few queries:
 
 ```sh
 make
 make database
 
+recsel db.rec -m 3
 recsel db.rec -q database
-recsel db.rec -q gpg
 recsel db.rec -e "title = 'ssh'"
 recsel db.rec -e "title ~ 'ssh'"
 recsel db.rec -e "title ~ 'bash'" -R title,wordcount
+
+recsel db.rec -t guide -j provides -G title \
+    -e "title = 'ssh'" \
+    -p 'sum(provides_wordcount)'
 ```
 
 # Style
@@ -29,6 +36,16 @@ recsel db.rec -e "title ~ 'bash'" -R title,wordcount
 - Nobody cares about how the project started.
 - Nobody wants to read what `ffmpeg` is, because anyone who wants to use it already knows what it is.
 
+## State Knowledge Dependencies
+
+Articles should state what you need to understand in order to read them *at the start*.
+They should not assume the reader knows much beyond common terminal commands, and should not provide a link to some other resource half-way through an article.
+
+People should be able to read an article from the beginning, then keep going until the end, and then stop.
+Articles should not take a detour through a chain of other articles of unknown size.
+
+[Do not Jaquays documentation](https://splint.rs/posts/no_links)
+
 ## Be Opinionated
 
 - Guides should not ask the reader to select options half-way through.
@@ -73,6 +90,11 @@ grep ls --color=always $HISTFILE | $PAGER
 
 Now we can see what can be changed.
 
+## Assume People Follow the Instructions
+
+Articles should say what to type, not the output.
+If the command is `ls`, users will see files once they try the command, but the article does not need to provide an example list of files unless an important point has to be made about output.
+
 # What's Wrong with Everything Else?
 
 ## Man pages

basics/at.md

@@ -1,46 +1,46 @@
 ---
 title: "at"
-tags: [ "Basics", "time" ]
+tags: [ "basics", "time" ]
 ---
 Install with:
 
-```bash
+```sh
 sudo apt install at
 ```
 
 Enable the daemon service with:
 
-```bash
+```sh
 sudo systemctl enable --now atd
 ```
 
 Then jobs can be specified with absolute time, such as:
 
-```bash
+```sh
 at 16:20
 ```
 
-```bash
+```sh
 at noon
 ```
 
-```bash
+```sh
 at midnight
 ```
 
-```bash
+```sh
 at teatime
 ```
 
 Type in your command, e.g.:
 
-```bash
+```sh
 touch /tmp/$FILE.txt
 ```
 
 The jobs can also be specified relative to the current time:
 
-```bash
+```sh
 at now +15 minutes
 ```
 
@@ -50,7 +50,7 @@ Finally, accept the jobs with ^D.
 
 Display a list of commands to run with:
 
-```bash
+```sh
 atq
 ```
 
@@ -58,7 +58,7 @@ atq
 
 This will print all pending IDs.  Remove a job by the ID with:
 
-```bash
+```sh
 atrm 2
 ```
 
@@ -68,7 +68,7 @@ Check `/var/spool/atd/` to see the jobs.
 
 Automatically add a job for later, by setting the date, then using echo for the command.
 
-```bash
+```sh
 t="$(date -d "2 minutes" +%R)"
 echo "fortune > ~/$FILE" | at "$t"
 watch cat $FILE

basics/basics.md

@@ -1,6 +1,6 @@
 ---
 title: "Basics"
-tags: [ "Basics" ]
+tags: [ "basics" ]
 ---
 
 You need about a dozen commands to move around Linux.
@@ -9,13 +9,13 @@ Don't worry about understanding any of it, just type it in and the habit forms p
 
 You start in a dark room. You want to know where you are by **p**rinting out your **w**orking '**d**irectory' (i.e. 'location'):
 
-```bash
+```sh
 pwd
 ```
 
 Have a look at what is here:
 
-```bash
+```sh
 ls
 ```
 
@@ -23,11 +23,11 @@ If you get no response, the list of items is "", meaning "nothing here".
 
 Have a look at **a**ll the files:
 
-```bash
+```sh
 ls -a
 ```
 
-```bash
+```sh
 . ..
 ```
 
@@ -35,38 +35,38 @@ So `.` means 'here' and `..` means 'you see stairs leading downwards' (e.g. 'the
 
 Change directory (`cd`) down one level:
 
-```bash
+```sh
 cd ..
 ```
 
 Look where you are again with `pwd`, then go back up.  Use `ls`, and if you see `bob`, then:
 
-```bash
+```sh
 cd bob
 ```
 
 Move around the directories.  The place at the bottom is the 'root', and is known as `/`.  Go to the root:
 
-```bash
+```sh
 cd /
 ```
 
 Do `ls` again and `cd` into `etc`.  Look at how much space those folders are taking up:
 
-```bash
+```sh
 du iptables
 ```
 That's the number of kilobytes the file is taking up.
 Do the same again, but in a human-readable format:
 
-```bash
+```sh
 du -h iptables
 ```
 
 The `du` program has `-h` for 'human', '-s' for 'short', and a bunch of other commands.
 Have a look at the manual and try another command:
 
-```bash
+```sh
 man du
 ```
 
@@ -74,7 +74,7 @@ Once you're done, press 'q' to quit the manual page and try the extra `du` flag
 
 Now you can try to gain super-powers and take over the system:
 
-```bash
+```sh
 sudo -i
 ```
 
@@ -82,61 +82,61 @@ At this point, you are 'root'.
 All your commands will be executed, even if they're unsafe, or even if you ask to delete the entire machine.
 Best to exit out of the root account:
 
-```bash
+```sh
 exit
 ```
 
 Go find a file that isn't a directory.  You can tell which is which with:
 
-```bash
+```sh
 ls -l
 ```
 
 A directory starts with a 'd', like this:
 
-```bash
+```sh
 drwxr-xr-x 79 root root 4096 Jan  3 05:15 /etc/
 ```
 
 A standard file starts with '-', like this:
 
-```bash
+```sh
 `-rw-r--r-- 1 root root 8 Dec 11 17:26 hostname`
 ```
 
 Look inside the file /etc/hostname to find out your computer's name:
 
-```bash
+```sh
 cat /etc/hostname
 ```
 
 Print out the words "hello world":
 
-```bash
+```sh
 echo "hello world"
 ```
 
 Move back to your home directory:
 
-```bash
+```sh
 cd
 ```
 
 Take the words 'hello world', and put them in 'my_file':
 
-```bash
+```sh
 echo 'hello world' > my_file
 ```
 
 Measure the disk usage of that file, then put the results at the bottom of the file:
 
-```bash
+```sh
 du $FILE >> $FILE
 ```
 
 And check the results:
 
-```bash
+```sh
 cat $FILE
 ```
 
@@ -148,7 +148,7 @@ Press tab after typing a few keys and bash will guess what you're trying to  typ
 
 Look at your file's owner:
 
-```bash
+```sh
 ls -l $FILE
 ```
 
@@ -156,19 +156,19 @@ If it says `-rw-r--r-- 1 root root 8 Dec 11 17:26 hostname` then the file is own
 
 Take your file and change the owner to root:
 
-```bash
+```sh
 sudo chown root $FILE
 ```
 
 Change the same file so it's owned by the group 'audio':
 
-```bash
+```sh
 sudo chown :audio $FILE
 ```
 
 Check you did that correctly:
 
-```bash
+```sh
 ls -l my_file
 ```
 
@@ -176,7 +176,7 @@ ls -l my_file
 
 Read the start of that line.  Root can 'read' and 'write' to or delete the file.  Try to remove (delete) it:
 
-```bash
+```sh
 rm $FILE
 ```
 
@@ -184,32 +184,32 @@ You'll see you're not allowed, because you don't own it.
 
 Look at which groups you're in:
 
-```bash
+```sh
 groups
 ```
 
 Change the file so that members of the audio group can write to the file:
 
-```bash
+```sh
 sudo chmod g+w $FILE
 ```
 
 Check you got it right with `ls -l`:
 
-```bash
+```sh
 -rw-rw-r-- 1 root audio 0 Jan  3 19:20 my_file
 ```
 
 Try to delete the file again:
 
-```bash
+```sh
 rm my_file
 ```
 
 If you can't, you're not in the audio group.  Add yourself.  You'll need to *modify* your *user account*, by **a**ppending 'audio' to your list of groups.
 Use `-a` to **a**ppend, and `-G`, to say you're modifying groups:
 
-```bash
+```sh
 sudo usermod -a -G audio [ your username here ]
 ```
 
@@ -219,19 +219,19 @@ Now you should be able to remove (delete) the file.  Remember, that using 'rm fi
 
 Make a directory called 'new test':
 
-```bash
+```sh
 mkdir 'new test'
 ```
 
 Make two directories, called 'A', and 'Z':
 
-```bash
+```sh
 mkdir A Z
 ```
 
 Make a single directory called 'A Z'
 
-```bash
+```sh
 mkdir 'A Z'
 ```
 
@@ -239,19 +239,19 @@ mkdir 'A Z'
 
 Measure the disk usage of everything ('\*' means 'everything'), and put it in a file called 'disk usage.txt':
 
-```bash
+```sh
 du -sch * > A/'disk usage'.txt
 ```
 
 Look at your file:
 
-```bash
+```sh
 cat A/'disk usage.txt'
 ```
 
 If you think you have too much information, use `grep` to just get the one line of text you want:
 
-```bash
+```sh
 grep total A/disk\ usage.txt
 ```
 
@@ -259,7 +259,7 @@ The `grep` program also has a manual ('man page').  You should find out what tha
 
 Start the manual:
 
-```bash
+```sh
 man du
 ```
 
@@ -267,7 +267,7 @@ Then search for `-c` by pressing `/`.  Your final keys should be `man du`, then
 
 Find out if the `ls` program also has a 'human readable' format by using `grep` to search for the word 'human':
 
-```bash
+```sh
 man ls | grep human
 ```
 
@@ -275,25 +275,25 @@ Now use that flag that you've found in combinatin with the `-l` flag to look at
 
 Remove the directory 'Z':
 
-```bash
+```sh
 rmdir Z
 ```
 
 Remove the directory 'Z':
 
-```bash
+```sh
 rmdir Z
 ```
 
 And then remove all the rest:
 
-```bash
+```sh
 rmdir *
 ```
 
 The 'A' directory will not budge because it's not empty.  Remove it recursively, so the computer will remove the things inside the directory as well as the directory itself:
 
-```bash
+```sh
 rm -r A
 ```
 
@@ -303,11 +303,11 @@ You get a package manager which installs programs, fonts, et c.
 If you're on something like Debian, you'll have `apt`, or if you're on something like Red Hat, you'll have `yum`.
 If unsure, ask where a program is:
 
-```bash
+```sh
 whereis yum
 ```
 
-```bash
+```sh
 whereis apt
 ```
 
@@ -315,14 +315,14 @@ If you get a hit, you can use whatever program that is to install things.
 
 Set a reminder of your package manager:
 
-```bash
+```sh
 echo my package manager is yum | lolcat
 ```
 
 If that failed it's because you don't have `lolcat` installed.
 Install lolcat:
 
-```bash
+```sh
 sudo apt install lolcat
 ```
 
@@ -330,13 +330,13 @@ Try the same command again.
 
 Search for things you want, like `libreoffice`, or `gimp`:
 
-```bash
+```sh
 apt search libreoffice
 ```
 
 ... then install one of them with:
 
-```bash
+```sh
 apt install $PROGRAM
 ```
 

basics/clock.md

@@ -1,41 +1,41 @@
 ---
 title: "clock"
-tags: [ "Basics", "time" ]
+tags: [ "basics", "time" ]
 ---
 
 Show system time:
 
-```bash
+```sh
 date
 ```
 
 Show hardware time:
 
-```bash
+```sh
 sudo hwclock -r
 ```
 
 Change system time to match hardware time:
 
-```bash
+```sh
 sudo hwclock --hctosys
 ```
 
 Change hardware time to match system time:
 
-```bash
+```sh
 sudo hwclock --systohc
 ```
 
 Manually set the hardware time to a specified date:
 
-```bash
+```sh
 sudo hwclock --set --date="8/25/19 13:30:00"
 ```
 
 ## Normal Date
 
-```bash
+```sh
 date +%d/%m/%y
 ```
 
@@ -45,7 +45,7 @@ Computers started counting time on January 1st, 1970, and added one second-per-s
 
 Track the time in Unix-time:
 
-```bash
+```sh
 date +%s
 ```
 
@@ -55,13 +55,13 @@ Servers which take their time from an observatory we call Stratum 1 servers.  Se
 
 Install ntp with:
 
-```bash
+```sh
 sudo apt-get install -y ntp
 ```
 
 The shell command for this is `ntpq`.  Monitor the service providers using:
 
-```bash
+```sh
 ntpq -p
 ```
 

basics/column.md

@@ -5,32 +5,32 @@ tags: [ "basics", "format", "json" ]
 
 Put output into column.
 
-```bash
+```sh
 du -h /etc/* | column
 ```
 
 Reformat file with an explicit separator (`-s`):
 
-```bash
+```sh
 column -ts: /etc/passwd
 ```
 
 Give columns names (`-N`), so you can hide some (`-H`):
 
-```bash
+```sh
 column -ts: -N User,PW,UID,GID,Description,Home,shell -H PW,GID /etc/passwd
 ```
 
 Reorder with `-O` (unspecified items remain):
 
 
-```bash
+```sh
 column -ts: -N User,PW,UID,GID,Description,Home,shell -H PW,GID -O User,Description,shell /etc/passwd 
 ```
 
 Output to json format with `-J`:
 
-```bash
+```sh
 column -J -ts: -H PW,GID,shell -N User,PW,UID,GID,Description,Home,shell /etc/passwd
 ```
 

basics/conditionals.md

@@ -1,6 +1,6 @@
 ---
 title: "conditionals"
-tags: [ "Basics" ]
+tags: [ "basics" ]
 ---
 # If statements
 
@@ -46,7 +46,7 @@ esac
 # While and Until
 This prints from 1 until 9.
 
-```bash
+```sh
 COUNTER=1
 while [ $COUNTER -lt 2 ]; do
         > ((COUNTER++))
@@ -58,7 +58,7 @@ There's also 'until', which stops when something is true, rather than keeping go
 
 # For
 
-```bash
+```sh
 for i in $( ls ); do
 > 	du -sh $i
 > done
@@ -70,19 +70,19 @@ The sequences tool counts up from X in jumps of Y to number Z.
 
 Count from 1 to 10.
 
-```bash
+```sh
 seq 10
 ```
 
 Count from 4 to 11.
 
-```bash
+```sh
 seq 4 11
 ```
 
 Count from 1 to 100 in steps of 5.
 
-```bash
+```sh
 seq 1 5 100
 ```
 

basics/cron.md

@@ -1,129 +0,0 @@
----
-title: "cron"
-tags: [ "Basics", "time" ]
----
-# Cronie
-
-The `cronie` program is also known as `crond`.
-
-## Install
-
-```bash
-sudo apt search -n ^cron
-```
-
-Once installed, search for the service name, and start it.
-
-```bash
-sudo systemctl list-unit-files | grep cron
-sudo systemctl enable --now $NAME
-```
-
-## Usage
-
-Show your current crontab:
-
-```bash
-crontab -l
-```
-
-You can put this in a file and edit it:
-
-```bash
-crontab -l > $filename
-echo '39 3 */3 * * /bin/tar czf /tmp/etc_backup.tgz /etc/' >> $filename
-```
-
-Then apply that crontab:
-
-```bash
-crontab $filename
-rm $filename
-```
-
-The `cron` program will check your syntax before adding the tab.
-
-Your crontab file sits somewhere in `/var/spool/`.
-Probably in `/var/spool/cron`.
-
-## Syntax
-
-`* * * * *`
-
-These five points refer to:
-
-`minute hour day month weekday`
-
-So '3pm every Sunday' would be:
-
-`0 15 * * 7`
-
-Here 'Sunday' is indicated by "7", and '3pm' is 'the 15th hour'.
-The minute is '0' (i.e. '0 minutes past three pm').
-
-Doing the same thing, but only in February, would be:
-
-`0 15 * 2 7`
-
-### Variables
-
-`cronie` doesn't know where you live, so to put something in your `$HOME` directory, you have to tell it:
-
-
-```bash
-echo "HOME=$HOME" > $filename
-crontab -l >> $filename
-crontab $filename
-```
-
-`cronie` doesn't know where anything lives, including programs.
-You can give it your usual `$PATH` variable like this:
-
-
-```bash
-echo $PATH > $filename
-crontab -l >> $filename
-crontab $filename
-```
-
-Now instead of doing this
-
-`40 */3 * * * /usr/bin/du -sh $HOME/* | sort -h > $HOME/sum.txt`
-
-You can simply do this: 
-
-`40 */3 * * * du -sh $HOME/* | sort -h > $HOME/sum.txt`
-
-## Run as Root
-
-You can execute a script as root by putting it into a directory, instead of in the tab.
-Look at the available cron directories:
-
-```bash
-ls -d /etc/cron.*
-```
-
-Make a script which runs daily:
-
-```bash
-f=apt_update.sh
-echo '#!/bin/bash' > $f
-echo 'apt update --yes' >> $f
-chmod +x $f
-sudo mv $f /etc/cron.daily/
-```
-
-### Testing with runparts
-
-Run-parts runs all executable scripts in a directory.
-
-```bash
-run-parts /etc/cron.hourly
-```
-
-# Troubleshooting
-
-### `date` Commands
-
-Cron doesn't understand the `%` sign, so if you want to use `date +%R`, then it should be escaped with a backslash: `date +\%R`.
-

basics/eval.md

@@ -5,7 +5,7 @@ tags: [ "basics" ]
 
 Compose a statement for execution.
 
-```bash
+```sh
 x='echo $y'
 echo $x
 y=dragon
@@ -14,7 +14,7 @@ eval "$x"
 
 The results remain in the current shell, unlike sub-shells.
 
-```bash
+```sh
 b=basilisk
 sh -c 'echo $b'
 eval "g=goblin"

basics/games.md

@@ -1,6 +1,6 @@
 ---
 title: "bash games"
-tags: [ "Games" ]
+tags: [ "games" ]
 ---
 
 Games are a great way to learn bash.

basics/hard_links.md

@@ -11,20 +11,20 @@ This ID is called the 'inode'.
 
 Create a file, and a hard link:
 
-```bash
+```sh
 fortune > $file_1
 mkdir -p x/y/z/
 ln $file_1 x/y/z/$file_2
 ```
 Have a long look at the file with the `-l` flag, and check the inode with `-i`:
 
-```bash
+```sh
 ls -li $file_1 x/y/z/$file_2
 ```
 
 Since they are the same file, you can make a change to one, and it changes both:
 
-```bash
+```sh
 fortune | tee x/y/z/$file_2
 cat $file_1
 cat x/y/z/$file_2

basics/kernel.md

@@ -1,34 +0,0 @@
----
-title: "kernel"
-tags: [ "Basics" ]
----
-## Living Space
-
-Kernel modules live in lib/modules/$(uname -r)
-
-## Change
-
-Load them with
-
-```bash
-sudo modprobe ath9k
-```
-
-Or remove one with
-
-```bash
-sudo modprove uvcvideo
-```
-
-The PC's irritating speaker beep can be really annoying. Disable it with:
-
-```bash
-sudo modprobe -r pcspeaker
-```
-
-Permanently disable a module by blacklisting it in `/etc/modprobe.d`:
-
-```bash
-echo 'blacklist pcspkr' > /etc/modprobe.d/*nobeep*.conf
-```
-

basics/kill.md

@@ -1,13 +1,13 @@
 ---
 title: "kill"
-tags: [ "Basics" ]
+tags: [ "basics" ]
 ---
 
 If you want to kill a program in a graphical environment, open a terminal and type:
 
 # Graphical Programs
 
-```bash
+```sh
 xkill
 ```
 
@@ -17,7 +17,7 @@ Then click on the application which you want to kill.
 
 To kill a program, find it with:
 
-```bash
+```sh
 pgrep discord
 ```
 
@@ -25,7 +25,7 @@ This will give you the UUID, e.g. `19643`.
 
 Kill the program with:
 
-```bash
+```sh
 kill 19643
 ```
 
@@ -33,7 +33,7 @@ kill 19643
 
 To see an ordered list of termination signals:
 
-```bash
+```sh
 kill -l
 ```
 
@@ -49,7 +49,7 @@ Higher numbers are roughly equivalent to insistence.
 
 For example:
 
-```bash
+```sh
 kill -1 3498
 ```
 
@@ -57,7 +57,7 @@ This roughly means 'maybe stop the program, if you can, maybe reload'.
 
 Or the famous:
 
-```bash
+```sh
 kill -9 3298
 ```
 

basics/locale.md

@@ -1,6 +1,6 @@
 ---
 title: "locale"
-tags: [ "Basics", "time" ]
+tags: [ "basics", "time" ]
 ---
 
 Your locale tells the computer your location, preferred time-and-date format, standard language, papersize, et c.
@@ -8,25 +8,25 @@ A list of supported locales is available at /usr/share/i18n/SUPPORTED
 
 See a full list with:
 
-```bash
+```sh
 cat /usr/share/i18n/SUPPORTED
 ```
 
 Take the first portion to generate full locale information for a region:
 
-```bash
+```sh
 locale-gen ru_RU.UTF-8
 ```
 
 Then use this for the current shell session with
 
-```bash
+```sh
 LANG=ru_RU.utf8
 ```
 
 Expand this to the entire system with: 
 
-```bash
+```sh
 export LANG=ru_RU.utf8
 ```
 
@@ -34,7 +34,7 @@ You can make this permanent for one user by adding this line to the ~/.profile o
 
 Make it permanent for the entire system by editing:
 
-```bash
+```sh
 sudo vim /etc/defaults/locale
 ```
 

basics/locating.md

@@ -1,6 +1,6 @@
 ---
 title: "locating"
-tags: [ "Basics" ]
+tags: [ "basics" ]
 ---
 # Type
 

basics/ls.md

@@ -8,13 +8,13 @@ Firstly, your `ls` is probably aliased to something.
 Check it with:
 
 
-```bash
+```sh
 alias ls
 ```
 If the prompt shows some alias, then start by removing it:
 
 
-```bash
+```sh
 unalias ls
 ```
 
@@ -23,24 +23,24 @@ Now we can begin.
 Check the most recently modified file:
 
 
-```bash
+```sh
 ls -t
 ```
 
 Reverse this with `tac` to see the file which has been unmodified the longest:
 
 
-```bash
+```sh
 ls -t | tac
 ```
 Group files by extension:
 
-```bash
+```sh
 ls -X
 ```
 Sort largest files first:
 
-```bash
+```sh
 ls -X
 ```
 

basics/processes.md

@@ -1,36 +1,36 @@
 ---
 title: "processes"
-tags: [ "Basics" ]
+tags: [ "basics" ]
 ---
 # Proccesses
 
 See running items in current terminal with 
 
-```bash
+```sh
 ps
 ```
 
 or more with 
 
-```bash
+```sh
 ps -a
 ```
 
 Or the entire system with
 
-```bash
+```sh
 ps -e
 ```
 
 Or the entire system with more information, BSD style, with:
 
-```bash
+```sh
 ps aux
 ```
 
 And then search for a particular program with 
 
-```bash
+```sh
 ps aux | grep cmus
 ```
 
@@ -40,19 +40,19 @@ Pause a job with ^z.  Put it in the background with the '&' suffix.
 
 List jobs in the current shell with
 
-```bash
+```sh
 jobs
 ```
 
 And then you can pull number 1 up again with 
 
-```bash
+```sh
 fg 1
 ```
 
 Or continue running a stopped job with:
 
-```bash
+```sh
 bg 1
 ```
 
@@ -62,31 +62,31 @@ This changes how nice a program is, from -20 to 19.
 
 Install a program, but nicely, at nice value '10':
 
-```bash
+```sh
 nice -10 sudo apt -y install libreoffice
 ```
 
 Aggressively use Steam, with a nice value of '-13'.
 
-```bash
+```sh
 nice --13 steam&
 ```
 
 Find out that Steam's fucking everything up, so you change its nice value with 'renice':
 
-```bash
+```sh
 renice --5 -p 3781
 ```
 
 Nerf all of roach-1's processes:
 
-```bash
+```sh
 renice 10 -u roach-1
 ```
 
 ... or the entire group
 
-```bash
+```sh
 renice -14 -g hackers
 ```
 

basics/setup/quality_of_life.md

@@ -9,7 +9,7 @@ This & That
 
 Refer to 'that last thing', and 'the first thing':
 
-```bash
+```sh
 fortune -l > file1
 cat !$  | tr -d u
 diff !^ !$
@@ -17,7 +17,7 @@ diff !^ !$
 
 **NB:** this can go wrong:
 
-```bash
+```sh
 ls -l file1 file2
 cat !^
 ```
@@ -36,7 +36,7 @@ Input Run-Commands (`~/.inputrc`)
 Alias Expansion
 ---------------
 
-```bash
+```sh
 echo '"\C- ": shell-expand-line' >> ~/.inputrc
 exec bash
 ```
@@ -47,7 +47,7 @@ Try just `ls`, then 'Control + Space'.
 Glob Expansion (`*`)
 --------------------
 
-```bash
+```sh
 echo '"\C-x": glob-expand-word' >> ~/.inputrc
 exec bash
 ls *<C-x>
@@ -63,13 +63,13 @@ Arbitrary Commands
 
 Use `\n` as a 'newline' character to automatically press `<Return>`.
 
-```bash
+```sh
 echo 'Control-y: "| lolcat\n"' >> ~/.inputrc
 exec bash
 ls<C-y>
 ```
 
-```bash
+```sh
 Control-l: "\C-u clear -x && ls\n"
 exec bash
 cd /etc/<C-l>
@@ -78,7 +78,7 @@ cd /etc/<C-l>
 Readline as Vi
 --------------
 
-```bash
+```sh
 echo 'set editing-mode vi' >> ~/.inputrc
 echo 'set keymap vi-insert' >> ~/.inputrc
 exec bash
@@ -100,7 +100,13 @@ Try:
 - `<Esc>kcw`
 - ls -a<Esc>xxxx
 
-Works with `python` too:
+Readline can work with python one you set `PYTHON_BASIC_REPL` to `true`.
+
+
+```sh
+echo 'export PYTHON_BASIC_REPL=true' >> ~/.bashrc
+exec bash
+```
 
 ```python
 im<C-n>os<Return>
@@ -115,7 +121,7 @@ Fix Globs!
 If you tried the previous commands then they will not work any more, because the `vi`-commands overwrite the other commands.
 Remove them.
 
-```bash
+```sh
 sed '/ vi/d' ~/.inputrc
 sed -i '/ vi/d' ~/.inputrc
 
@@ -130,14 +136,14 @@ Vi-sibility
 The `readline` prompt becomes confusing if you don't remember if you're in insert or normal mode.
 But you can show the  current mode in the prompt:
 
-```bash
+```sh
 echo 'set show-mode-in-prompt on' >> ~/.inputrc
 exec bash
 ```
 
 Set new symbols for normal and insert mode:
 
-```bash
+```sh
 echo 'set vi-ins-mode-string "  "' >> ~/.inputrc
 echo 'set vi-cmd-mode-string " "' >> ~/.inputrc
 ```
@@ -148,33 +154,33 @@ Fuzzy Sort
 Check your repos for `sk-im`, and install.
 The program is called `sk`.
 
-```bash
+```sh
 FUZZY=sk
 ```
 
 If you don't have it, `fzy` or `fzf` should work the same way.
 
-```bash
+```sh
 FUZZY=fzy
 ```
 
 Find some 'read-config' files to check out:
 
-```bash
+```sh
 find . -maxdepth 2 -name "*rc"
 find . -maxdepth 2 -name "*rc" | $FUZZY
 ```
 
 And read some:
 
-```bash
+```sh
 PAGER='less -R'
 $PAGER "$(find . -maxdepth 2 -name "*rc" | $FUZZY)"
 ```
 
 Make the change long-term:
 
-```bash
+```sh
 alias rrc='$PAGER "$(find . -maxdepth 2 -name "*rc" | sk)"'
 alias | grep rrc= >> ~/.bash_aliases
 ```

basics/soft_links.md

@@ -7,7 +7,7 @@ When a program encounters a soft link, it will make a  guess at whether it shoul
 
 To make a soft link to a file in the current directory, linking is easy:
 
-```bash
+```sh
 fortune > $file_1
 ln -s $file_1 $link_1
 ```
@@ -27,14 +27,14 @@ dir_0/
 
 Inside `dir_1`, making a soft link to `dir_0/file_1` would mean putting the directions to that file:
 
-```bash
+```sh
 cd dir_1
 ln -s ../file_1 link_1
 ```
 
 The real content of the file is just '`../file_1`, so making it from another directory would mean writing exactly the same address to that file:
 
-```bash
+```sh
 ln -s ../file_1 dir_2/link_2
 ```
 
@@ -54,7 +54,7 @@ dir_0/
 
 Since it's just an address, you can delete the original file, then make another.
 
-```bash
+```sh
 rm file_1
 ls -l dir_1/
 fortune > file_1
@@ -65,7 +65,7 @@ cat dir_1/link_1
 
 Last, let's make a link from `dir_2/link_2` to `dir_1/file_1` (this will delete the old link):
 
-```bash
+```sh
 ln -s -f ../dir_1/file_1 dir_2/link_2
 cat dir_2/link_2
 ```

basics/time.md

@@ -1,12 +1,12 @@
 ---
 title: "time"
-tags: [ "Basics", "time" ]
+tags: [ "basics", "time" ]
 ---
 # systemd
 
 Set time to synchronize with an ntp server:
 
-```bash
+```sh
 timedatectl set-ntp true
 ```
 
@@ -18,7 +18,7 @@ Local time is kept in /etc/localtime.
 
 According to Dave's LPIC guide, you can set the local time by making asymboling link from your timezone to /etc/localtime, as so:
 
-```bash
+```sh
 sudo ln -sf /usr/share/zoneinfo/Europe/Belgrade /etc/localtime
 ```
 
@@ -28,41 +28,41 @@ sudo ln -sf /usr/share/zoneinfo/Europe/Belgrade /etc/localtime
 
 See local time, language and character settings with:
 
-```bash
+```sh
 locale
 ```
 
 List available locales with:
 
-```bash
+```sh
 locale -a
 ```
 
 To see additional locales which are available (but not necessarily installed):
 
-```bash
+```sh
 cat /usr/share/i18n/SUPPORTED
 ```
 
 Set a supported locale with:
 
-```bash
+```sh
 locale-gen pl_PL.UTF-8
 ```
 
 Then set that language, with:
 
-```bash
+```sh
 LANG=pl_PL.UTF-8
 ```
 
-... then reboot.
+...then reboot.
 
 # Network Time Protocol
 
 Glimpse an overview with:
 
-```bash
+```sh
 ntpq -p
 ```
 
@@ -73,6 +73,6 @@ Usually this is run as a service, so just start that service.
 If your clock drifts too far from the right time, it will not reset happily.
 For it to reset like this:
 
-```bash
+```sh
 sudo ntpd -q -g -x -n
 ```

basics/tree.md

@@ -28,7 +28,7 @@ Each description-line starts with a tab.
 
 To represent a file structure as a nested series of markdown lists, you can try this horrifying `sed` one-liner:
 
-```bash
+```sh
 tree -tf --dirsfirst --gitignore --noreport --charset ascii  | \
     sed -e 's/| \+/  /g' \
     -e 's/[|`]-\+/ */g' \

basics/users.md

@@ -1,28 +1,28 @@
 ---
 title: "users"
-tags: [ "Basics" ]
+tags: [ "basics" ]
 ---
 # Basic Information
 
 Let's get some entries with 'getent', e.g. passwd or group.
 
-```bash
+```sh
 getent passwd
 ```
 
-```bash
+```sh
 getent group
 ```
 
 Obviously:
 
-```bash
+```sh
 getent shadow
 ```
 
 ## Examples
 
-```bash
+```sh
 sudo adduser maestro 
 ```
 
@@ -30,71 +30,71 @@ add user 'maestro'
 
 This depends upon the settings in the /etc/default/useradd file and /etc/login.defs
 
-```bash
+```sh
 sudo useradd -m pinkie 
 ```
 
 add user 'pinkie' with a home directory
 
-```bash
+```sh
 sudo adduser -m -e 2017-04-25 temp 
 ```
 
 add expiry date to user
 
-```bash
+```sh
 userdel maestro 
 ```
 
 delete maestro
 
-```bash
+```sh
 userdel -r maestro 
 ```
 
 delete maestro and hir homefolder
 
-```bash
+```sh
 groups 
 ```
 
 find which group you are in
 
 
-```bash
+```sh
 id 
 ```
 
 same
 
-```bash
+```sh
 id -Gn maestro 
 ```
 
 Find which groups maestro is in
 
 
-```bash
+```sh
 deluser --remove-home maestro 
 ```
 
 delete user maestro
 
 
-```bash
+```sh
 usermod -aG sudo maestro 
 ```
 
 Add user maestro to group sudo:
 
 
-```bash
+```sh
 cat /etc/passwd 
 ```
 
 list users' passwords (and therefore users)
 
-```bash
+```sh
 groupadd awesome 
 ```
 
@@ -104,33 +104,33 @@ Passwords are stored in /etc/shadow.
 
 There are user accounts for processes such as 'bin' and 'nobody' which are locked, so they're unusable.
 
-```bash
+```sh
 passwd -l bin 
 ```
 
 Lock the user 'bin'.
 
-```bash
+```sh
 more /etc/passwd | grep games 
 ```
 
 we find the name, password and user id of the user 'games'. I.e. the password is 'x', and the user id is '5'.  The password is an impossible hash, so no input password could match.
 
-```bash
+```sh
 groupdel learners | delete the group 'learners'
 ```
 
-```bash
+```sh
 gpasswd -d pi games | remove user 'pi' from the group 'games'
 ```
 
-```bash
+```sh
 id games 
 ```
 
 find the id number of group 'games' (60)
 
-```bash
+```sh
 usermod -aG sudo maestro 
 ```
 
@@ -156,7 +156,7 @@ Alternatively, change the shell in /etc/passwd.
 
 Usermod also lets you change a user's username:
 
-```bash
+```sh
 usermod -l henry mark
 ```
 
@@ -170,7 +170,7 @@ usermod -L henry
 
 -G or -groups adds the user to other groups:
 
-```bash
+```sh
 usermod -G sudo henry
 ```
 
@@ -186,13 +186,13 @@ In /etc/group, a group file may look like this:
 
 We can use groupmod, like like usermod, e.g. to change a name:
 
-```bash
+```sh
 groupmod -n frontoffice backoffice
 ```
 
 Delte a group:
 
-```bash
+```sh
 groupdel frontoffice
 ```
 
@@ -200,37 +200,37 @@ groupdel frontoffice
 
 See list of logged on users.
 
-```bash
+```sh
 w
 ```
 
 See last logons:
 
-```bash
+```sh
 last
 ```
 
 or all logon attempts, including bad attempts:
 
-```bash
+```sh
 lastb
 ```
 
 List recently accessed files:
 
-```bash
+```sh
 last -d
 ```
 
 See files opened by steve
 
-```bash
+```sh
 lsof -t -u steve
 ```
 
 See files opened by anyone but steve
 
-```bash
+```sh
 lsof -u ^steve
 ```
 
@@ -240,19 +240,19 @@ Some files can be executed by people as if they had super user permissions, and
 
 Let's start with files executable by user:
 
-```bash
+```sh
 sudo find / -type f -perm -g=s -ls
 ```
 
 And then those executable by the group:
 
-```bash
+```sh
 find / -type f -perm -g=s -ls
 ```
 
 And finally, worrying files, executable by anyone as if sie were the owner:
 
-```bash
+```sh
 find / -xdev \( -o -nogroup \) -print
 ```
 
@@ -260,7 +260,7 @@ Then have a look at resource usage per user.
 
 # SGID
 
-```bash
+```sh
 sudo chmod u+s process.sh
 ```
 

basics/yes.md

@@ -11,14 +11,14 @@ This is extremely powerful.
 
 If you ever want to automatically install something which persistently nags you with `do you want to do the thing? [y/N]?`, then you can just pipe `yes` into that program, and it will answer 'yes' to all questions.
 
-```bash
+```sh
 yes | $INSTALL_SCRIPT_FILE.sh
 ```
 
 This works best for disposable systems, like VMs or containers.
 Try this on a live system, and you might find out that you should have read that message fully.
 
-```bash
+```sh
 yes | yay
 ```
 

chat/profanity.md

@@ -1,6 +1,6 @@
 ---
 title: "profanity"
-tags: [ "Chat", "omemo" ]
+tags: [ "chat", "omemo" ]
 ---
 # Setup (Commands)
 
@@ -142,4 +142,3 @@ You can ensure omemo automatcally turns on:
 ```
 ---
 
-'OTR' encryption is mostly dead, but you can find the old instructions [here](profanity-otr).

chat/wgetpaste.md

@@ -1,6 +1,6 @@
 ---
 title: "wgetpaste"
-tags: [ "Chat" ]
+tags: [ "chat" ]
 ---
 
 See available pastebins:

data/backups/archives.md

@@ -8,22 +8,21 @@ tags: [ "tar", "backups", ".tgz", "tar.gz" ]
 
 Combine many files and directories into a single t-archive file.
 
-```bash
+```sh
 tar cf "$ARCHIVE".tar $DIR
 ```
 You can remember this with the mnemonic '*C*reate *F*ile'.
 
-Unfortunately, this stores the full file path, so making a tar archive of `/etc/nginx/` will store `etc/nginx` (without the leading `/`.
+Unfortunately, this stores the full file path, so making a tar archive of `/etc/nginx/` will store `etc/nginx` (without the leading `/`).
-
 It's often better to tell tar which path to start from using the `-C` flag.
 
-```bash
+```sh
 tar cf "$ARCHIVE".tar -C /etc/ nginx
 ```
 
 Check the contents of your archive with:
 
-```bash
+```sh
 tar tf "$ARCHIVE".tar
 ```
 
@@ -31,7 +30,7 @@ If you want to store 'everything in a directory', then using `*` will not work,
 
 Instead, you can store the target in a variable:
 
-```bash
+```sh
 files=$(ls /etc/nginx)
 tar cf "$ARCHIVE".tar -C /etc/nginx/ $file
 ```
@@ -40,7 +39,9 @@ tar cf "$ARCHIVE".tar -C /etc/nginx/ $file
 
 Extract the tar archive with
 
-> tar xf "$ARCHIVE".tar
+```sh
+tar xf "$ARCHIVE".tar
+```
 
 You can remember this with the mnemonic 'e*X*tract *F*ile'.
 
@@ -48,7 +49,7 @@ You can remember this with the mnemonic 'e*X*tract *F*ile'.
 
 Create a zip-compressed archive with the `z` flag.
 
-```bash
+```sh
 tar czf "$ARCHIVE".tgz -C /etc/nginx/ $file
 ```
 
@@ -60,18 +61,16 @@ You can use any file ending you want, but sane people like to use '.tgz' or '.ta
 
 Make archive:
 
-```bash
+```sh
-PASSWORD=my_password
+7za a -tzip -p "$PASSWORD" -mem=AES256 $ARCHIVE.zip $FILE_1 $FILE_2
-```
-```bash
-7za a -tzip -p$PASSWORD -mem=AES256 $ARCHIVE.zip $FILE_1 $FILE_2
 ```
+
 Note that people can still see every filename in your archive, and can change those files.
 They just can't read the contents.
 
 Unzip:
 
-```bash
+```sh
 7za x archive.zip
 ```
 

data/backups/unison.md

@@ -1,11 +1,11 @@
 ---
 title: "unison"
-tags: [ "Backups", "synch" ]
+tags: [ "backups", "synch" ]
 ---
 
 Install unison on both machines, and make sure both have the same version of unison, with the same version of the ocaml compiler (the smallest difference will cause problems).
 
-```bash
+```sh
 unison -version
 ```
 
@@ -13,14 +13,14 @@ Create the `~/.unison` directory on both machines.
 
 Make a job called `backup`:
 
-```bash
+```sh
 JOB=backup
 ```
 
 Here is an example job, which synchronizes the `~/music` directory with a remote machine which has the same username.
 
 
-```bash
+```sh
 echo "
 auto = true
 root=$HOME
@@ -42,7 +42,7 @@ The last command means it will ignore any file with a name ending in `.flac`.
 The first command means this will run but also confirm which files will be deleted, and which will be transferred, us `batch = true` instead.
 Or you can deleted that line in the `.prf` file and run it with a flag:
 
-```bash
+```sh
 unison -batch *backup*.prf
 ```
 

data/base_16.md

@@ -1,8 +1,26 @@
 ---
 title: "Base 16"
-tags: [ "Data" ]
+tags: [ "data" ]
 ---
 
-```bash
+Base 16 numbers often use `0x` at the start, so '10' just means '10', but `0x10` means '10 in base 16' which means '16'.
+
+For small numbers, use `printf`.
+
+```sh
 printf "%x" $NUMBER
 ```
+
+For any number, use `bc`.
+
+
+```sh
+fortune | md5sum  | cut -d' ' -f1 | tr [:lower:] [:upper:] | bc
+```
+
+- Inputting base 16 uses `ibase=16`.
+- Outputting base 10 uses `ibase=10`
+
+```sh
+echo 'ibase=16;' $(echo cbb478ac825f0dce7671254be035d0bc | tr [:lower:] [:upper:]) | bc
+```

data/calcurse.md

@@ -5,5 +5,10 @@ tags: [ "data", "calendar", "daylight savings" ]
 
 ## Setup
 
-The UK government keeps an ics file with clock, [here](https://www.gov.uk/when-do-the-clocks-change/united-kingdom.ics).
+The UK government keeps an `ics` file with clock.
+
+```sh
+wget https://www.gov.uk/when-do-the-clocks-change/united-kingdom.ics
+calcurse -i united-kingdom.ics
+```
 

data/email.md

@@ -9,10 +9,10 @@ Install `opensmtpd` (or similar), then `ncat` or `nc` or `netcat` (this mysterio
 
 Start the `opensmtpd` service, then use netcat to speak with the mail-daemon:
 
-
+```sh
-```
 nc localhost 25
 ```
+
 The computer should respond with code `220`, which means 'I am listening'.
 
 > 220 hex ESMTP OpenSMTPD
@@ -40,7 +40,7 @@ Tell the mail daemon who you are in this format.
 
 Then tell it who you're sending to.
 
-```
+```sh
 RCPT TO: <www@dmz.rs>
 ```
 
@@ -67,7 +67,7 @@ You will find the email under `/var/spool` or `/var/mail` or similar.
 
 If unsure, just take a part of your email, like `FRAGMENT="turn off server please"`, then `grep` for it:
 
- ```bash
+ ```sh
 sudo grep -r $FRAGMENT /var/spool/*
  ```
 

data/exiftool.md

@@ -1,17 +1,17 @@
 ---
 title: "exiftool"
-tags: [ "Metadata" ]
+tags: [ "metadata", "exifdata" ]
 ---
 
-Find metadata.
+Find metadata:
 
-```bash
+```sh
-exiftool image.jpg
+exiftool "$file".jpg
 ```
 
-Find info on all images in current directory.
+Find info on all `.png` images in current directory.
 
-```bash
+```sh
 exiftool -ext .png .
 ```
 
@@ -19,22 +19,14 @@ You can make this recurring with the -r switch.
 
 And overwrite all metadata:
 
-```bash
+```sh
 exiftool -all= -overwrite_original -ext jpg .
 ```
 (NB: This does not work on pdf data. See [here](pdf_erasure.md) for erasing all pdf data)
 
 Or just GPS data:
 
-```bash
+```sh
 exiftool -gps:all= *.jpg
 ```
 
-You can also use the imagemagick tool:
-
-```bash
-identify -verbose
-```
-
-
-

data/git/basics.md

@@ -6,41 +6,40 @@ tags: [ "data" ]
 
 ## New Machines
 
-```bash
+```sh
 git config --global user.email "$YOUR_EMAIL"
 ```
 
-```bash
+```sh
 git config --global user.name "$YOUR_NAME"
 ```
 
 # New Git
 
-Start a git in directory `$DIR`:
+Decide on algorithm:
 
-```bash
+- If you're scared of insecure hash-sums, go with `hash=sha256`.
-mkdir $DIR && cd $DIR
+- If you don't know what a hash sum is, go with `hash=sha1`.
+
+## Init the Git
+
+Start a git in directory `${DIR}`:
+
+```sh
+git init --object-format=${hash} ${DIR}
+cd ${DIR}
 ```
 
-```bash
+Make a file explaining what the project does, and tell `git` to track it:
-git init
-```
 
-Make a file explaining what the project does:
+```sh
-
+echo "I hereby solemnly swear never to commit a binary file." > README.md
-```bash
-vim README.md
-```
-
-Add this to the git:
-
-```bash
 git add README.md
 ```
 
 Then make the initial commit, explaining the change you just made:
 
-```bash
+```sh
 git commit
 ```
 
@@ -48,17 +47,17 @@ git commit
 
 Once you make a change to some file, add it and make a commit explaining it.
 
-```bash
+```sh
 git add $FILE
 ```
 
-```bash
+```sh
 git commit -m"change $FILE"
 ```
 
 Check your history:
 
-```bash
+```sh
 git log
 ```
 
@@ -69,20 +68,20 @@ Give it the same name as the `$DIR` directory, above.
 
 Add this as a remote:
 
-```bash
+```sh
 REMOTE=gitlab
 git remote add $REMOTE  https://gitlab.com/$USERNAME/$DIR
 ```
 
 Tell git you're pushing the branch "master" to the remote repo "origin": 
 
-```bash
+```sh
 git push -u master origin
 ```
 
 If someone makes a change on the remote, pull it down with:
 
-```bash
+```sh
 git pull
 ```
 
@@ -91,31 +90,31 @@ git pull
 A branch is a full copy of the project to test additional ideas.
 You can make a new branch called 'featurez' like this:
 
-```bash
+```sh
 git branch $FEATURE_BRANCH
 ```
 
 Have a look at all your branches:
 
-```bash
+```sh
 git branch
 ```
 
 Switch to your new branch:
 
-```bash
+```sh
 git checkout $FEATURE_BRANCH
 ```
 
 And if your changes are rubbish, checkout the "master" branch again, then delete "featurez":
 
-```bash
+```sh
 git branch -D $FEATURE_BRANCH
 ```
 
 Or if it's a good branch, push it to the remote:
 
-```bash
+```sh
 remote=origin
 git push $remote $FEATURE_BRANCH
 ```
@@ -124,13 +123,13 @@ git push $remote $FEATURE_BRANCH
 
 Once you like the feature, merge it into the main branch.  Switch to master then merge it:
 
-```bash
+```sh
 git merge $FEATURE_BRANCH
 ```
 
 And delete the branch, as you've already merged it:
 
-```bash
+```sh
 git branch -d $FEATURE_BRANCH
 ```
 
@@ -138,7 +137,7 @@ git branch -d $FEATURE_BRANCH
 
 ## Pulling another git repo into a subtree
 
-```bash
+```sh
 git subtree add -P config git@gitlab.com:bindrpg/config.git master
 ```
 
@@ -146,27 +145,27 @@ git subtree add -P config git@gitlab.com:bindrpg/config.git master
 
 ## Delete All History
 
-```bash
+```sh
 git checkout --orphan temp
 ```
 
-```bash
+```sh
 git add -A
 ```
 
-```bash
+```sh
 git commit -am "release the commits!"
 ```
 
-```bash
+```sh
 git branch -D master
 ```
 
-```bash
+```sh
 git branch -m master
 ```
 
-```bash
+```sh
 git push -f origin master
 ```
 
@@ -174,21 +173,21 @@ Gitlab requires more changes, such as going to `settings > repository` and switc
 
 ## Clean up Bloated Repo
 
-```bash
+```sh
 git fsck --full
 ```
 
-```bash
+```sh
 git gc --prune=now --aggressive
 ```
 
-```bash
+```sh
 git repack
 ```
 
 ## Find Binary Blobs
 
-```bash
+```sh
 git rev-list --objects --all \
 | git cat-file --batch-check='%(objecttype) %(objectname) %(objectsize) %(rest)' \
 | sed -n 's/^blob //p' \

data/git/commit_for_another.md

@@ -0,0 +1,22 @@
+---
+title: "Commit for Another"
+tags: [ "data", "git" ]
+---
+
+You can make Alice the author, while you are still the commiter:
+
+```sh
+name="Alice Bobinson"
+email="alice@email.com"
+
+git add ${file}
+git commit --author="${name} <${email}>"
+```
+
+Or, make Alice both the committer and the author:
+
+
+```sh
+git -c user.name="${name}" -c user.email="${email}" commit -m "${message}"
+```
+

data/git/git-lfs.md

@@ -1,24 +1,73 @@
 ---
 title: "git-lfs"
-tags: [ "data" ]
+tags: [ "data", "git" ]
+requires: [ "git" ]
 ---
 
-Install, and add with
+Git Large File Storage ('LFS') needs to change your `~/.gitconfig` to check out those binary files:
 
-```bash
+```sh
+cat ~/.gitconfig
 git lfs install
+cat ~/.gitconfig
 ```
 
-Then track some filetype with:
+Then track some filetypes with:
 
-```bash
+```sh
-git lfs track "\*.ttf"
+cd $git_repository
+ext=ttf
+git lfs track "*.$ext"
 ```
 
 Or a directory with:
 
-```bash
+```sh
 git lfs track "images/"
 ```
 
-All changes require adding `.gitattributes`.
+Track the changes to `.gitattributes`:
+
+```sh
+git status
+git add .gitattributes
+git commit -m "add $ext to lfs"
+```
+
+## Bash Completion
+
+If bash completion does not work, you'll have to add it:
+
+```sh
+git lfs completion bash |  sudo tee /usr/share/bash-completion/completions/git-lfs 
+```
+
+## Trouble Shooting
+
+You have some file "$FILE".png, which has some problem.
+
+Check the filetype:
+
+```sh
+file "$FILE".png
+```
+
+This should say the type is 'image'.
+If it says the type is 'text', then this file is really just a reminder to `git-lfs` to check out that file.
+
+Check `git-lfs` is expecting that file:
+
+```sh
+git lfs status
+git lfs ls-files
+```
+
+...then try these commands, and check the filetype again:
+
+```sh
+git lfs fetch --all
+git lfs fsck
+git lfs checkout
+git lfs status
+```
+

data/git/git_stash.md

@@ -0,0 +1,69 @@
+---
+title: "git stash"
+tags: [ "data", "git" ]
+requires: [ "git" ]
+---
+
+Save file-changes without committing anything.
+
+Change a file:
+
+```sh
+file=README.md
+fortune >> ${file}
+git diff
+git stash save
+```
+
+List which stashes you have:
+
+
+```sh
+git stash list
+
+    stash@{1}: WIP on master: c21f102 init git
+```
+
+Make a new file, then stash it:
+
+
+```sh
+otherfile=file.log
+fortune > ${otherfile}
+git add ${otherfile}
+stashname=logfile
+git stash save ${stashname}
+```
+
+Now you can see two stashed changes, and the most recent has a name:
+
+```sh
+git stash list
+
+    stash@{0}: On master: logfile
+    stash@{1}: WIP on master: c21f102 init git
+```
+
+You can delete a stash by referring to its index number, or name (if it has one).
+
+```sh
+choice=1
+git stash drop ${choice}
+
+choice=${stashname}
+git stash drop ${choice}
+```
+
+Or just run `git stash drop` to remove the most recent (labelled `{0}`).
+
+Return stashed changes with an index number (or the most recent).
+
+```sh
+git stash pop ${choice}
+```
+
+Delete all stashes:
+
+```sh
+git stash clear
+```

data/git/hooks.md

@@ -5,7 +5,7 @@ tags: [ "data", "git" ]
 
 Check out the sample hooks:
 
-```bash
+```sh
 cd $GIT_REPO
 ls .git/hooks
 head .git/hooks/pre-commit.sample
@@ -13,7 +13,7 @@ head .git/hooks/pre-commit.sample
 
 Add a hook to check the shell scripts in `$GIT_REPO` before making a commit:
 
-```bash
+```sh
 echo '#!/bin/sh
 shellcheck *.sh' > .git/hooks/commit-msg
 chmod u+x .git/hooks/commit-msg

data/git/subtree.md

@@ -1,5 +1,5 @@
 ---
-title: "git"
+title: "git subtree"
 tags: [ "data", "git", "subtree" ]
 ---
 
@@ -10,7 +10,7 @@ The first should be its own repository, but should also retain its own history.
 
 First, we extract its history as an independent item, and make that into a seprate branch.
 
-```bash
+```sh
 git subtree split --prefix=sub-1 -b sub
 ```
 
@@ -18,7 +18,7 @@ If you want something a few directories deep, you can use `--prefix=sub-1/dir-2/
 
 Then go and create a new git somewhere else:
 
-```bash
+```sh
 cd ..;mkdir sub-1;cd sub-1;git init --bare
 ```
 
@@ -28,7 +28,7 @@ git push ../subtest sub:master
 
 Finally, you can clone this repo from your original.
 
-```bash
+```sh
 git clone ../subtest
 ```
 

data/gpg.md

@@ -1,6 +1,6 @@
 ---
 title: "gpg"
-tags: [ "data", "GPG" ]
+tags: [ "data", "gpg" ]
 ---
 
 - [Setup](gpg/basics.md)

data/gpg/basics.md

@@ -6,7 +6,7 @@ tags: [ "data", "GPG" ]
 
 Generate keys:
 
-```bash
+```sh
 gpg --full-generate-key
 ```
 
@@ -14,7 +14,7 @@ Follow the guide.
 
 # Encrypting a file
 
-```bash
+```sh
 gpg -r malinfreeborn@posteo.net -e file
 ```
 
@@ -25,7 +25,7 @@ Check you have an encrypted version of your file.
 # Changing Expiration Dates
 
 
-```bash
+```sh
 gpg --list-keys
 # or...
 gpg -k
@@ -37,13 +37,13 @@ gpg -k
 
 Make a password with a password (cypher encryption).
 
-```bash
+```sh
 gpg -c --output passwords.txt
 ```
 
 or 
 
-```bash
+```sh
 gpg -c > passwords.txt
 ```
 
@@ -53,7 +53,7 @@ Write message then stop with Ctrl+d.
 
 Get the message back out the file with:
 
-```bash
+```sh
 gpg -d passwords.txt
 ```
 
@@ -61,13 +61,13 @@ gpg -d passwords.txt
 
 Search for a key at any key store:
 
-```bash
+```sh
 gpg --search-keys nestorv
 ```
 
 Once you've made a decision about someone:
 
-```bash
+```sh
 gpg --list-keys
 ```
 
@@ -86,13 +86,13 @@ This is a fingerprint.
 
 You can now decide the trust level (this stays on your computer).
 
-```bash
+```sh
 gpg --edit-key CD30421FD825696BD95F1FF644C62C57B790D3CF
 ```
 
 Once you're in the interface, type `trust`.
 
-```bash
+```sh
 gpg --sign-key alice@posteo.net
 ```
 
@@ -104,7 +104,7 @@ This system relies on a ring of people swapping key information.
 
 Send those trusted keys up to a server, so people can see you have verified them:
 
-```bash
+```sh
 gpg --send-keys 024C6B1C84449BD1CB4DF7A152295D2377F4D70F
 ```
 
@@ -125,7 +125,7 @@ keyserver hkps://keys.mailvelope.com
 
 Refreshing keys will tell you if some key you have contains a signature from someone you already trust, or if someone has published a revocation certificate (meaning their key should not be trusted any more).
 
-```bash
+```sh
 gpg --refresh-keys
 ```
 
@@ -135,12 +135,12 @@ You can use the [crontab](../../basics/cron.md) to refresh keys, but this will m
 
 Your public key:
 
-```bash
+```sh
 gpg --output me.gpg --armor --export
 ```
 Alternatively:
 
-```bash
+```sh
 gpg --export -a person@email.tld > my_key.pub
 ```
 

data/gpg/extras.md

@@ -1,5 +1,5 @@
 ---
-title: "gpg"
+title: "gpg with vim"
 tags: [ "vim", "data", "GPG" ]
 requires: [ "GPG Basics", "vim basics" ]
 ---

data/groff.md

@@ -1,6 +1,6 @@
 ---
 title: "groff"
-tags: [ "Data" ]
+tags: [ "data", "logic" ]
 ---
 # Basic Documents
 

data/interactive_string_substitution.md

@@ -0,0 +1,19 @@
+---
+title: "Interactive String Substitution"
+tags: [ "data", "vim", "substitution" ]
+---
+
+Want to find and replace, but also confirm each instance?
+
+```sh
+vim -c "%s/${pattern}/${replacement}/gc" -c 'wq' ${file}
+```
+
+Notice that double-quotes (`"`) in the first command (`-c`).
+
+Alternatively, check with an example string:
+
+
+```sh
+sed "s/${pattern}/ARGLEBARGLE/g" ${file} | grep 'ARGLEBARGLE'
+```

data/json.md

@@ -0,0 +1,13 @@
+---
+title: "ijq"
+tags: [ "data", "json", "TUI" ]
+---
+
+Analyse `json` easier with `ijq`.
+
+```sh
+column -J -ts: -H PW,GID,shell -N User,PW,UID,GID,Description,Home,shell /etc/passwd > host.json
+ijq !$
+```
+
+If you get stuck, try adding `.[]`.

data/khard.md

@@ -1,60 +1,52 @@
 ---
 title: "khard"
-tags: [ "Data" ]
+tags: [ "data" ]
 ---
 Get the basic config:
 
-```bash
+```sh
 mkdir ~/.config/khard
 ```
 
-```bash
+```sh
 cp /usr/share/doc/khard/examples/khard/khard.conf.example ~/.config/khard.conf
 ```
 
 Short list
 
-```bash
+```sh
 khard list
 ```
 
 Longer list
 
-```bash
+```sh
 khard show
 ```
 
 Show from addressbook 'work'
 
-```bash
+```sh
 khard list -a work
 ```
 
 Make a new contact in address book 'family'
 
-```bash
+```sh
 khard new -a family
 ```
 
-```bash
+```sh
 khard edit grampa
 ```
 
-```bash
+```sh
 khard remove bob
 ```
 
 Move contact 'nina' from 'work' to 'home' address book.
 
-```bash
+```sh
 khard move -a home nina -A work
 ```
 
-## Advanced
-
-Merge:
-
-```bash
-khard merge [-a source_abook] [-u uid|search terms [search terms ...]] [-A target_abook] [-U target_uid|-t target_search_terms]
-```
-

data/newsboat.md

@@ -4,11 +4,11 @@ tags: [ "RSS" ]
 ---
 Create the configuration directory before you start, and add at least 1 URL.
 
-```bash
+```sh
 mkdir ~/.config/newsboat
 ```
 
-```bash
+```sh
 echo 'https://voidlinux.org/atom.xml foss tech' >> ~/.config/newsboat/urls
 ```
 
@@ -28,7 +28,7 @@ You can input a Youtube channel by adding this, with the channel's ID at the end
 
 To get the channel ID without hunting:
 
-```bash
+```sh
 curl *'https://www.youtube.com/@1minfilms'* | grep -oE 'browseId":"U\w+"' | tail | cut -d'"' -f3 
 ```
 

data/newsraft.md

@@ -0,0 +1,54 @@
+---
+title: "Newsraft"
+tags: [ "data", "RSS" ]
+requires: [ "Shell Scripts" ]
+---
+
+# Setup
+
+Install newsraft, then:
+
+```sh
+mkdir ~/.config/newsraft
+echo 'https://codeberg.org/newsraft/newsraft.atom "Newsraft git"' >> ~/.config/newsraft/feeds
+newsraft
+```
+
+# Commands
+
+Copy the default config file:
+
+```
+cp /usr/share/doc/newsraft/example/config ~/.config/newsraft/config
+
+```
+
+Add a line to check the man page while inside the program:
+
+```
+bind M exec man newsraft
+```
+
+This will fail, because the letter 'M' is taken by `mpv`.
+
+Add this line to take the default link, and place it in a list of videos.
+
+```
+bind V mark-read; exec echo "%l" >> ~/.cache/vidlist.txt
+```
+
+# Videos
+
+You can get an RSS feed from any YouTube video with this script:
+
+```
+#!/bin/sh
+
+CHANNEL_ID="$(curl -s "$1" | tr ',' '\n'  | grep -Po 'channelId":"\K[\w+-]+' | tail -1)"
+FEED_URL="https://www.youtube.com/feeds/videos.xml?channel_id=$CHANNEL_ID"
+CHANNEL_NAME="$(curl -s "$FEED_URL" | grep -m 1 -Po 'title\>\K[\w\s]+')"
+
+printf '%s "%s"\n' "$FEED_URL" "$CHANNEL_NAME"
+```
+
+

data/pass.md

@@ -1,42 +1,42 @@
 ---
 title: "pass"
 tags: [ "data" ]
+requires: "GPG Basics"
 ---
-[Video instructions](https://www.hooktube.com/watch?v=hlRQTj1D9LA)
 
 Setup [gpg](./gpg.md) keys.
 
 Show your gpg secret it:
 
-```bash
+```sh
 gpg --list-secret-keys
 ```
 
 Then use the id number under `sec` to make a pass repo:
 
-```bash
+```sh
 KEY="$(gpg --list-secret-keys  | grep -m 1 -A1 '^sec' | tail -n 1)"
 ```
 
-```bash
+```sh
 pass init $KEY
 ```
 
 To add a basic password, e.g. for `$WEBSITE`:
 
-```bash
+```sh
 pass $WEBSITE
 ```
 
 To insert a multiline password, e.g. with a login name:
 
-```bash
+```sh
 pass add -m $WEBSITE
 ```
 
 Remove a password:
 
-```bash
+```sh
 pass rm $WEBSITE
 ```
 

data/pdf-to-txt.md

@@ -2,7 +2,8 @@
 title: "pdf to txt"
 tags: [ "data", "pdf", "ocr" ]
 ---
-How to translate pdf book images to text (results are very poor, and will need lots of corrections).
+
+How to translate pdfs to text (results are very poor, and will need lots of corrections).
 
 ## Dependencies
 
@@ -12,13 +13,13 @@ Arch: tesseract-data-eng and poppler-utils
 
 ## Script
 
-```bash
+```sh
 pdftoppm -png *file*.pdf test
 ```
 
-```bash
+```sh
-for x in \*png; do
+for x in *png; do
-    tesseract -l eng  "$x" - >> *out*.txt
+    tesseract -l eng  "$x" - >> out.txt
 done
 ```
 

data/pdf_erasure.md

@@ -1,6 +1,6 @@
 ---
 title: "PDF Metadata Erasure"
-tags: [ "Metadata", "Ghost Script", "gs", ".pdf" ]
+tags: [ "metadata", "ghost script", "gs", ".pdf" ]
 ---
 
 You cannot erase pdf metadata with `exiftool` (it only *appends* your changes).
@@ -23,6 +23,6 @@ Make a text file called 'pdfmark.txt'.
 
 Then run:
 
-```bash
+```sh
 gs -o output.pdf -sDEVICE=pdfwrite "$FILE".pdf pdfmark.txt
 ```

data/radicale.md

@@ -1,6 +1,7 @@
 ---
 title: "radicale and nginx"
 tags: [ "data", "calendar" ]
+requires: [ "nginx", "certbot" ]
 ---
 
 Check before you start:
@@ -15,7 +16,7 @@ The standard `radicale` package should come with a nice `systemd` service file.
 
 If the service comes already-started, stop it immediately:
 
-```bash
+```sh
 sudo systemctl stop radicale
 ```
 
@@ -39,7 +40,7 @@ You might get it in the `apache` package or similar.
 
 `htpasswd` allows you to generate passwords for users, and place them in `/etc/radicale/users`.
 
-```bash
+```sh
 PASS="$(xkcdpass)"
 htpasswd -nb $USER "$PASS" | sudo tee -a /etc/radicale/users
 echo "Your username is $USER"
@@ -92,7 +93,7 @@ sudo ln -s /etc/nginx/sites-available/radicale /etc/nginx/sites-enables/
 
 Finally, replace the example `DOMAIN` with your actual domain name.
 
-```bash
+```sh
 DOMAIN=whatever.com
 sudo sed -i "s/DOMAIN/$DOMAIN/g" /etc/nginx/sites-available/radicale 
 ```
@@ -101,18 +102,18 @@ sudo sed -i "s/DOMAIN/$DOMAIN/g" /etc/nginx/sites-available/radicale
 
 Check nginx is happy:
 
-```bash
+```sh
 sudo nginx -t
 ```
 You will almost certainly need a new SSL certificate for the site:
 
-```bash
+```sh
 sudo certbod -d cal.$DOMAIN
 ```
 
 Start or restart both services:
 
-```bash
+```sh
 sudo systemctl start radicale
 sudo systemctl restart nginx
 ```

data/recfiles.md

@@ -44,6 +44,9 @@ recset -f "$new_field" --delete $database
 
 - [Extended example](recfiles/extended.md)
 - [Playing with board games data](recfiles/Board_Games.md)
+- [Playing with IP addresses](recfiles/IP_ASN.md)
+- [Manage LaTeX Bibliographies](recfiles/bibliography.md)
+- [Fixes](recfiles/recfixes.md)
 
 # Resources
 

data/recfiles/bibliography.md

@@ -0,0 +1,121 @@
+---
+title: "Recfile Bibliography for TeX"
+tags: [ "data", "database", "recfiles", "tex" ]
+requires: [ "Recfiles", "TeX", "Makefile" ]
+---
+
+Store your bibliography in a `recfile` database, then extract any part with `make`.
+
+For example, you could store books like this in `bibliography.rec`:
+
+```recfile
+%rec: book
+%key: slug
+
+slug: thinkingexperience
+author: H. H. Price
+title: Thinking and Experience
+year: 1953
+publisher: Harvard University Press, Cambridge
+
+slug: inventingrightwrong
+author: John Leslie Mackie
+title: Inventing Right and Wrong
+year: 1997
+publisher: Penguin Books, England
+
+```
+
+Run `make book` to extract `book.bib`, ready for LaTeX to use:
+
+```bib
+@book{thinkingexperience,
+   author = {H. H. Price},
+   title = {Thinking and Experience},
+   year = {1953},
+   publisher = {Harvard University Press, Cambridge},
+}
+
+@book{inventingrightwrong,
+   author = {John Leslie Mackie},
+   title = {Inventing Right and Wrong},
+   year = {1997},
+   publisher = {Penguin Books, England},
+}
+```
+
+The `makefile` syntax is just a few lines (though admittedly employs some garbled shell-crud):
+
+```make
+bibs != grep -Po '%rec: \K.*' bibliography.rec
+bibfiles = $(patsubst %, %.bib, $(bibs))
+
+$(bibfiles): %.bib: bibliography.rec
+	recsel $< -t $(basename $@) |\
+		sed 's/slug: \(.*\)/@$(basename $@){\1,/g' |\
+		sed 's/^\(\b.*\b\): \(.*\)/   \1 = {\2},/gI' |\
+		sed 's/^$$/}\n/g' > $@
+		echo '}' >> $@
+```
+
+Here's a longer `bibliography.rec` file, which can also produce `article.bib`:
+
+```recfile
+%rec: book
+%key: slug
+%type: year int
+%constraint: year > -2000
+%sort: year month
+
+slug: thinkingexperience
+author: H. H. Price
+title: Thinking and Experience
+year: 1953
+publisher: Harvard University Press, Cambridge
+
+slug: inventingrightwrong
+author: John Leslie Mackie
+title: Inventing Right and Wrong
+year: 1997
+publisher: Penguin Books, England
+
+slug: metaphysicscontemporaryintro
+author: Michael J. Loux
+title: Metaphysics: A Contemporary Introduction
+year: 1998
+publisher: Routledge, London
+
+slug: pluralityworlds
+author: David Lewis
+title: On the Plurality of Worlds
+publisher: Blackwell Publishing, Oxford
+year: 2001
+
+%rec: article
+%key: slug
+%sort: year month
+
+slug: genuinerealisttheory
+author: John Divers
+title: A Genuine Realist Theory of Advanced Modalizing
+year: 1999
+pages: 217–240
+month: april
+journaltitle: Mind
+uri: https://academic.oup.com/mind/article-abstract/108/430/217/975258?redirectedFrom=fulltext
+volume: 108
+publisher: Harvard University Press, Cambridge
+
+slug: twokindsmentalrealism
+author: Tam\'{a}s Demeter
+title: Two Kinds of Mental Realism
+year: 2009
+pages: 40:59-71
+uri: https://www.researchgate.net/profile/Tamas_Demeter2/publication/41554923_Two_Kinds_of_Mental_Realism/links/0deec53247f5a4ae21000000.pdf
+month: august
+journaltitle: Journal for General Philosophy of Science
+volume: 30
+publisher: Harvard University Press, Cambridge
+
+```
+

data/recfiles/extended.md

@@ -7,7 +7,7 @@ tags: [ "data", "database", "recfiles" ]
 
 Make a database for your boardgames, specifying only one field and value:
 
-```bash
+```sh
 database=games.rec
 n=Name
 g=Vojvodina
@@ -18,21 +18,21 @@ recsel $database
 
 Insert a few more, with the estimated playtime:
 
-```bash
+```sh
 recins -f Name -v Saboter -f Playtime -v 30 $database
 recins -f Name -v Chess -f Playtime -v 30 $database
 ```
 
 View all games, or select one by number:
 
-```bash
+```sh
 recsel $database
 recsel -n 0 $database
 ```
 
 Each game should note whether or not you have played it yet, so you can add that field and set the default to `yes`.
 
-```bash
+```sh
 f=played
 v=yes
 recset -f $f -a $v $database
@@ -40,7 +40,7 @@ recset -f $f -a $v $database
 
 ...but the field is wrong, it should have a capital letter:
 
-```bash
+```sh
 new_field=Played
 recset -f $f --rename $new_field
 ```
@@ -49,19 +49,19 @@ recset -f $f --rename $new_field
 
 Check how many records the database has:
 
-```bash
+```sh
 recinf $database
 ```
 
 Look at just the games you've never played:
 
-```bash
+```sh
 recsel --expression="Played = 'no'" $database
 ```
 
 Print how many, then just print the names:
 
-```bash
+```sh
 recsel -e "Played = 'no'" --count $database
 recsel -e "Played = 'no'" --print=Name $database
 ```
@@ -70,7 +70,7 @@ recsel -e "Played = 'no'" --print=Name $database
 
 To change a game's `Played` field from `no` to `yes`, use `recset` to specify the number, and change that field.
 
-```bash
+```sh
 num=0
 f=Played
 value=yes
@@ -80,14 +80,14 @@ recset --number=$num -f $f --set=$value $database
 
 Find all games with a playtime of `30`, and set the field `Max_Players` to `4`.
 
-```bash
+```sh
 recset -e "Playtime = 40" -f Max_Players --set 50 games.rec
 ```
 
 This doesn't work, because that field does not exist.
 You can `--set-add` the field, to add it wherever it does not exist.
 
-```bash
+```sh
 recset -e "Playtime = 40" -f Max_Players --set-add 50 games.rec
 ```
 
@@ -95,14 +95,14 @@ recset -e "Playtime = 40" -f Max_Players --set-add 50 games.rec
 
 Remove `Played` record from first game:
 
-```bash
+```sh
 num=0
 recset --number=$num -f Played --delete $database
 ```
 
 You can comment the line instead of deleting it:
 
-```bash
+```sh
 num=1
 recset --number=$num -f Played --delete $database
 recsel $database
@@ -111,7 +111,7 @@ cat $database
 
 Delete an entire record:
 
-```bash
+```sh
 num=2
 recdel --number=$num $database
 ```

data/recfiles/ip_asn.md

@@ -0,0 +1,16 @@
+---
+title: "IP Addresses with Recfiles"
+tags: [ "data", "recfiles", "games" ]
+requires: "Recfiles"
+---
+
+## Download the Database
+
+Download the csv data, and separate the ipv4 data from the ipv6.
+
+```sh
+curl -Lo ips.zip 'https://www.kaggle.com/api/v1/datasets/download/ipinfo/ipinfo-country-asn'
+unzip -p ips.zip country_asn.csv | csv2rec | recsel -e "start_ip ~ '\.'"  > ipv4.rec
+unzip -p ips.zip country_asn.csv | csv2rec | recsel -e "start_ip ~ '::'"  > ipv6.rec
+```
+

data/recfiles/recfixes.md

@@ -0,0 +1,33 @@
+---
+title: "Recfixes"
+tags: [ "data", "recfiles" ]
+requires: "Recfiles"
+---
+
+Sometimes `recsel` chokes on a large query, and you need to break the query into chunks with a pipe.
+
+This Kickstarter file has 374,853 records.
+Here's the chonky query:
+
+```sh
+recsel kick.rec -e "Category = 'Games'" -p "Subcategory,Avg(Goal)" -G Subcategory
+```
+
+It breaks down like this:
+
+| Chunk                         | Meaning                                       |
+|:-----------------------------:|:---------------------------------------------:|
+| `recsel kick.rec`             | Select records from `kick.rec`                |
+| `-e "Category = 'Games'"`     | Select only records where Category = 'Games'  |
+| `-p "Subcategory,Avg(Goal)"`  | Print the Subcategory and average goal        |
+| `-G "Subcategory"`            | Group by subcategory                          |
+
+Two ways to break the query apart:
+
+```sh
+recsel kick.rec -e "Category = 'Games'" | recsel -p "Subcategory,Avg(Goal)" -G "Subcategory"
+
+recsel kick.rec -e "Category = 'Games'" > games.rec
+recsel games.rec -p "Subcategory" -G "Subcategory"
+```
+

data/sc-im.md

@@ -1,6 +1,7 @@
 ---
 title: "sc-im"
 tags: [ "TUI", "data", "spreadsheet", ".csv" ]
+requires: [ "vim basics" ]
 ---
 
 - [Sample file](sc-im/sample.sc)
@@ -14,7 +15,7 @@ Change this with `:set autowrap`.
 
 Make `sc-im` always autowrap:
 
-```bash
+```sh
 mkdir .config/sc-im/bash
 echo 'set autowrap' >> .config/sc-im/scimrc
 ```

data/sc-im/convert_spreadsheets.md

@@ -0,0 +1,13 @@
+---
+title: "Convert Spreadsheets"
+tags: [ "data", "sc-im" ]
+---
+
+Convert between spreadsheet formats with `sc-im`.
+
+```sh
+sc-im --quiet --quit_afterload --nocurses --export_csv ${file}.xlsx
+sc-im --quiet --quit_afterload --nocurses --export_tab ${file}.sc
+sc-im --quiet --quit_afterload --nocurses --export_mkd ${file}.csv
+sc-im --quiet --quit_afterload --nocurses --export_txt ${file}.tsv
+```

data/search_system.md

@@ -33,7 +33,7 @@ By default, the `/mnt` directory is 'pruned' from the database.
 So if you want to search `/mnt` for videos, remove the word `/mnt` from the configuration file.
 
 
-```bash
+```sh
 su root
 cat /etc/updatedb.conf
 sed -i 's#/mnt/##' /etc/updatedb.conf

data/search_video_audio.md

@@ -0,0 +1,33 @@
+---
+title: "Search Video Audio"
+tags: [ "data", "video" ]
+---
+
+Check subtitles available:
+
+```sh
+url='https://videos.domainepublic.net/videos/watch/d9567d5b-1add-477c-bce3-a58cef84c28c'
+yt-dlp --list-subs "$url" | grep --max-count=1 '^en'
+```
+
+The original language often displays with  `-orig`, e.g. `en-orig (Original)`.
+
+```
+Language Formats
+ar       vtt
+az       vtt
+bg       vtt
+ca       vtt
+cs       vtt
+da       vtt
+de       vtt
+el       vtt
+en       vtt
+```
+
+Search youtube.com for videos on a topic, and download subtitles:
+
+```sh
+url="$(ytfzf -I l "$search" )" && \
+yt-dlp --write-subs --sub-format 'ass/srt/best/vtt' --sub-langs "en.*" --skip-download "$url"
+```

data/sharing_secrets.md

@@ -7,7 +7,7 @@ You can share parts of a secret with multiple people, so only some of them need
 
 Install `ssss`, then decide on the total number of secrets (`N`), and the threshold of people who must share their shard of the secret in order to reveal the secret.
 
-```bash
+```sh
 N=5
 T=3
 FILE=secret.txt
@@ -17,7 +17,7 @@ Each shard is a line inside secret.txt.
 
 Check it's working:
 
-```bash
+```sh
 head -n $T $FILE | ssss-combine -t $T
 tail -n $T $FILE | ssss-combine -t $T
 ```

data/soft-serve/maintenance.md

@@ -0,0 +1,24 @@
+---
+title: "Soft Serve Maintenance"
+tags: [ "data", "git server", "maintenance" ]
+requires: [ "git", "nginx" ]
+---
+
+Over time git repositories become bloated with old data, but never get cleaned.
+I can't find an official way to clean up the crud, so I did this:
+
+```sh
+usermod -aG soft-serve $USER
+# Log out and back in for this to take effect.
+
+cd /var/lib/soft-serve/data/repos
+sudo chmod -R g+w *
+git config --global --add safe.directory '*'
+du -sh *.git
+for repo in *.git; do
+    git -C "$repo" gc
+done
+du -sh *.git
+$EDITOR ~/.gitconfig
+# You should remove having everything marked 'safe'.
+```

data/soft-serve/soft_https.md

@@ -1,6 +1,7 @@
 ---
 title: "Soft Serve through https"
 tags: [ "data", "git server", "lfs" ]
+requires: [ "git", "nginx" ]
 ---
 
 ## `http` Setup
@@ -29,11 +30,11 @@ http:
 
 Restart the `soft-serve` service, then check it's working by cloning from localhost:
 
-```bash
+```sh
 git clone http://localhost:23232/${some_repo}.git
 ```
 
-## `https` Setup
+### `https` Setup
 
 Put this file at `/etc/nginx/sites-enabled/$DOMAIN.tld`, then set up standard certificates with [nginx](../networking/website/nginx.md).
 
@@ -67,3 +68,4 @@ Put this file at `/etc/nginx/sites-enabled/$DOMAIN.tld`, then set up standard ce
 }
 
 ```
+

data/soft.md

@@ -0,0 +1,8 @@
+---
+title: "Soft-Serve"
+tags: [ "data", "git server", "lfs", "TUI" ]
+requires: [ "git", "nginx" ]
+---
+
+- [Soft-Serve with https](soft-serve/soft_https.md)
+- [Maintenance](soft-serve/maintenance.md)

data/sqlite.md

@@ -5,7 +5,7 @@ tags: [ "data" ]
 
 Work with a database:
 
-```bash
+```sh
 sqlite3 "$FILE".sqlite3
 ```
 Compress the database:

data/task/contexts.md

@@ -0,0 +1,34 @@
+---
+title: "Taskwarrior Contexts"
+tags: [ "data", "task" ]
+requires: [ "Taskwarrior" ]
+---
+
+# Contexts
+
+Set three contexts by their tags:
+
+```sh
+task context define work +sa or +hr
+```
+
+```sh
+task context define study +ed or +void or +rat
+```
+
+```sh
+task context define home -sa -hr -ed -void -rat
+```
+
+Change to the first context.
+
+```sh
+task context work
+```
+
+Then stop.
+
+```sh
+task context none
+```
+

data/task/task.md

@@ -1,23 +1,35 @@
 ---
-title: "task"
+title: "Taskwarrior"
-tags: [ "Organization" ]
+tags: [ "data", "organization" ]
 ---
 
 Set up the configuration file:
 
-```bash
+```sh
 task
 ```
 
+Taskwarrior published a new feature to synchronize tasks others, but the feature was not ready.
+The server's default installation instructions assume that users pay for hosting services.
+All listed providers run proprietary software and actively support genocide.
+
+
+To ignore the synchronization, tell the configuration file to use a local synchronization file.
+
+```sh
+task config sync.local.server_dir
+task config data.location ~/.local/state/
+```
+
 Add a task:
 
-```bash
+```sh
 task add update linux
 ```
 
 See which task is next:
 
-```bash
+```sh
 task next
 ```
 
@@ -25,13 +37,13 @@ Note the id number.
 
 Mark a task as started:
 
-```bash
+```sh
 task start 1
 ```
 
 Once finished:
 
-```bash
+```sh
 task 1 done
 ```
 
@@ -39,23 +51,21 @@ task 1 done
 
 Add a project:
 
-```bash
+```sh
 task add project:house buy potted plant
 task add proj:house.repair buy screwdriver
 task add proj:house.repair buy shelf brackets
 task add pro:house.paint buy white paint
-task add pro:house.paint buy red paint
+
-task add pro:house.paint buy black paint
+for t in "buy red paint" "buy black paint" "buy brushes" ; do
-task add pro:house.paint buy brushes
+  task add pro:house.paint $t
+done
 ```
 
 ## Summary
 
-```bash
+```sh
 task pro:house sum
-```
-
-```bash
 task burndown.daily pro:house
 ```
 
@@ -63,69 +73,33 @@ The summaries will show how fast a project is being completed, and when you can
 
 # Tags
 
-```bash
+
+```sh
 task add +buy toothbrush
-```
-
-You can then see only tasks which involve buying something with:
-
-```bash
 task +buy
 ```
 
-# Contexts
-
-Set three contexts by their tags:
-
-```bash
-task context define work +sa or +hr
-```
-
-```bash
-task context define study +ed or +void or +rat
-```
-
-```bash
-task context define home -sa -hr -ed -void -rat
-```
-
-Change to the first context.
-
-```bash
-task context work
-```
-
-Then stop.
-
-```bash
-task context none
-```
-
 # Review
 
 View list of tasks completed in the last week:
 
-```bash
+```sh
 task end.after:today-1wk completed
 ```
 
 # User Defined Attributes
 
-Make a UDA 'size'.
+Define a new attribute for tasks called 'size'.
+The 'user defined attribute' (UDA) needs a `type` and `label`.
 
-```bash
+```sh
 task config uda.size.type string
-```
-
-```bash
 task config uda.size.label Size
 ```
+You can also ensure task tasks can only be `large`, `medium`, or `small`, then set a default.
 
-```bash
+```sh
 task config uda.size.values large,medium,small
-```
-
-```bash
 uda.size.default=medium
 ```
 
@@ -133,7 +107,7 @@ uda.size.default=medium
 
 This command shows tasks I'm most interested in:
 
-```bash
+```sh
 task next +ACTIVE or +OVERDUE or due:today or scheduled:today or pri:H
 ```
 

data/task/taskwarrior_configuration.md

@@ -0,0 +1,20 @@
+---
+title: "Taskwarrior Configuration"
+tags: [ "data", "task" ]
+requires: [ "Taskwarrior" ]
+---
+
+Show your current config:
+
+
+```sh
+task show
+```
+
+Use machine-readable output to make a config file with all configuration keys shown, then make it your configuration file.
+
+```sh
+task _show > ${file}
+mv ${file} ~/.config/task/taskrc
+```
+

data/task/timew.md

@@ -1,18 +1,18 @@
 ---
 title: "timewarrior"
-tags: [ "Data", "tracking", "time", "timew" ]
+tags: [ "data", "tracking", "time", "timew" ]
 ---
 # Summaries
 
 Try:
 
-```bash
+```sh
 timew summary :yesterday
 ```
 
 You can also use :week, :lastweek, :month, :quarter, :year, or a range such as:
 
-```bash
+```sh
 timew summary today to tomorrow
 timew today - tomorrow
 2018-10-15T06:00 - 2018-10-17T06:00
@@ -22,7 +22,7 @@ Each of these can gain with the :ids tag.
 
 # Basics
 
-```bash
+```sh
 timew start
 timew stop
 timew continue
@@ -32,7 +32,7 @@ timew tags
 
 And add ids with:
 
-```bash
+```sh
 timew summary :ids
 timew track 10am - 1pm timewarrior
 timew track 1pm for 2h walk
@@ -42,50 +42,50 @@ timew track 1pm for 2h walk
 
 First get ids.
 
-```bash
+```sh
 timew summary :ids
 ```
 
 Then if we're looking at task @2:
 
-```bash
+```sh
 timew move @2 12:00
 timew lengthen @2 3mins
 ```
 
-```bash
+```sh
 time shorten @2 40mins
 ```
 
 # Forgetting
 
-```bash
+```sh
 timew start 1h ago @4
 ```
 
 Or if your action actually had a break:
 
-```bash
+```sh
 timew split @8
 ```
 
 Or maybe not?
 
-```bash
+```sh
 timew join @4 @8
 timew @8 delete
 ```
 
 Start at previous time
 
-```bash
+```sh
 timew start 3pm 'Read chapter 12'
 timew start 90mins ago 'Read chapter 12'
 ```
 
 Cancel currently tracked time.
 
-```bash
+```sh
 timew cancel
 ```
 
@@ -157,11 +157,11 @@ with:
 
 # Fixing Errors
 
-```bash
+```sh
 curl -O https://taskwarrior.org/download/timew-dbcorrection.py
 ```
 
-```bash
+```sh
 python timew-dbcorrections.py
 ```
 

data/view_torrents.md

@@ -0,0 +1,11 @@
+---
+title: "View Torrents"
+tags: [ "data", "transmission", "torrenting" ]
+---
+
+
+```sh
+transmission-show $file.torrent  | less
+```
+
+`TRACKERS` shows where transmission will ask who has the torrent, but will probably be out of date.

data/w3m.md

@@ -4,7 +4,7 @@ tags: [ "browsers" ]
 ---
 Open a search tab:
 
-```bash
+```sh
 w3m ddg.gg
 ```
 

distros/arch/autologin.md

@@ -1,13 +1,13 @@
 ---
 title: "autologin"
-tags: [ "Distros", "Arch" ]
+tags: [ "distros", "arch" ]
 ---
 
 # Automatic Login
 
 Edit `/etc/systemd/system/getty@tty1.service.d/override.conf` by typing:
 
-```bash
+```sh
 sudo systemctl edit getty@tty1
 ```
 

distros/arch/basic-install.md

@@ -5,17 +5,17 @@ requires: [ "partitions", "time" ]
 ---
 Keyboard layout changed.
 
-```bash
+```sh
 ls /usr/share/kbd/keymaps/**/*.map.gz
 ```
 
-```bash
+```sh
 loadkeys uk.map.gz
 ```
 
 Check if boot mode is UEFI
 
-```bash
+```sh
 ls /sys/firmware/efi/efivars
 ```
 
@@ -23,115 +23,115 @@ Without efivars, the system must boot with BIOS.
 
 # Check network's up
 
-```bash
+```sh
 ping archlinux.org
 ```
 
 Set system clock properly
 
-```bash
+```sh
 timedatectl set-ntp true
 ```
 
 Check disks
 
-```bash
+```sh
 lsblk
 ```
 
 Make partition
 
-```bash
+```sh
 parted -s /dev/sda mklabel gpt
 ```
 
-```bash
+```sh
 parted -s /dev/sda mklabel msdos
 ```
 
-```bash
+```sh
 parted  -s /dev/sda mkpart primary ext4 512 100%
 ```
 
-```bash
+```sh
 parted -s /dev/sda set 1 boot on
 ```
 
-```bash
+```sh
 mkfs.ext4 /dev/sda1
 ```
 
 Use pacstrap to get the base install.
 
-```bash
+```sh
 mount /dev/sda1 /mnt/
 ```
 
-```bash
+```sh
 pacstrap /mnt base base-devel vim linux linux-firmware
 ```
 
 Make fstab notes for new system.
 
-```bash
+```sh
 genfstab -U /mnt >> /mnt/etc/fstab
 ```
 
-```bash
+```sh
 arch-chroot /mnt
 ```
 
-```bash
+```sh
 echo 'en_GB.UTF-8' > /etc/default/locale
 ```
 
-```bash
+```sh
 pacman -Sy networkmanager grub
 ```
 
 For legacy:
 
-```bash
+```sh
 grub-install --target=i386-pc /dev/sda
 ```
 
 For EFI:
 
-```bash
+```sh
 sudo pacman -S efibootmgr
 ```
 
-```bash
+```sh
 mkdir /boot/efi
 ```
 
-```bash
+```sh
 grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=GRUB --remmovable
 ```
 
-```bash
+```sh
 grub-mkconfig -o /boot/grub/grub.cfg
 ```
 
 set local time
 
-```bash
+```sh
 ln -sf /usr/share/zoneinfo/Europe/Belgrade /etc/localtime
 ```
 
 Find the desired locale's and uncomment them.
 
-```bash
+```sh
 vi /etc/locale.gen
 ```
 
-```bash
+```sh
 locale-gen
 ```
 
 Make your keyboard changes permenent with:
 
-```bash
+```sh
 vi /etc/vconsole.conf
 ```
 
@@ -140,13 +140,13 @@ unsure about this bit - is this name just for the loadkeys function?
 
 Make a hostname
 
-```bash
+```sh
 echo pc > /etc/hostname
 ```
 
 Set hostnames for network, or at least your own.
 
-```bash
+```sh
 vi /etc/hosts
 ```
 
@@ -160,27 +160,27 @@ If the system has a permanent IP address, it should be used instead of localhost
 
 Ping some sites to make sure the network's working
 
-```bash
+```sh
 passwd
 ```
 
-```bash
+```sh
 exit
 ```
 
-```bash
+```sh
 umount -R /mnt
 ```
 
 Remove that awful beep sound:
 
-```bash
+```sh
 rmmod pcspkr
 ```
 
 ...and make the change permanent:
 
-```bash
+```sh
 sudo echo "blacklist pcspkr" >> /etc/modprobe.d/nobeep.conf
 ```
 

distros/arch/gpu.md

@@ -1,6 +1,6 @@
 ---
-title: "fonts"
+title: "Ach Linux GPU Setup"
-tags: [ "distros" ]
+tags: [ "arch", "GPU" ]
 ---
 # Step 1: Multilib
 
@@ -13,7 +13,7 @@ Include = /etc/pacman.d/mirrorlist
 
 And update:
 
-```bash
+```sh
 sudo pacman -Syu
 ```
 
@@ -21,7 +21,7 @@ sudo pacman -Syu
 
 Check your graphics card type:
 
-```bash
+```sh
 lspci  | grep VGA
 ```
 
@@ -31,7 +31,7 @@ lspci  | grep VGA
 
 If you see `Nvidia`, then install the intel drivers:
 
-```bash
+```sh
 sudo pacman -S --needed lib32-mesa vulkan-intel lib32-vulkan-intel vulkan-icd-loader lib32-vulkan-icd-loader
 ```
 
@@ -39,7 +39,7 @@ sudo pacman -S --needed lib32-mesa vulkan-intel lib32-vulkan-intel vulkan-icd-lo
 
 If you see `Intel`, then install the intel drivers:
 
-```bash
+```sh
 sudo pacman -S --needed lib32-mesa vulkan-intel lib32-vulkan-intel vulkan-icd-loader lib32-vulkan-icd-loader xf86-video-intel
 ```
 
@@ -47,17 +47,16 @@ sudo pacman -S --needed lib32-mesa vulkan-intel lib32-vulkan-intel vulkan-icd-lo
 
 If you see `AMD`, then check your card support `vulkan`:
 
-```bash
+```sh
 yay -S gpu-viewer
 ```
 
-```bash
+```sh
 vulkaninfo | grep 'VkPhysicalDeviceVulkanMemoryModelFeatures' -A 3
 ```
 
 You should see 'true' here.
 
-```bash
+```sh
 sudo pacman -S --needed lib32-mesa vulkan-radeon lib32-vulkan-radeon vulkan-icd-loader lib32-vulkan-icd-loader xf86-video-amdgpu
 ```
-

distros/arch/maintenance.md

@@ -7,14 +7,14 @@ tags: [ "arch" ]
 
 Clean the cache of old packages in `/var/cachepacman/pkg/`:
 
-```bash
+```sh
 ls /var/cache/pacman/pkg/ | wc -l
 sudo pacman -Sc
 ls /var/cache/pacman/pkg/ | wc -l
 ```
 And the same for `yay` (with `-Yc` to remove old dependencies):
 
-```bash
+```sh
 ls ~/.cache/yay/ | wc -l
 yay -Sc
 yay -Yc
@@ -27,7 +27,7 @@ If you chance a configuration file, such as `/etc/environment`, and `pacman` wan
 
 Check the new files, then look at the difference between the `pacman` version, and your version.
 
-```bash
+```sh
 sudo find /etc/ /var/ /usr/ -name "*.pacnew" 
 diff /etc/pacman.d/mirrorlist*
 ```
@@ -36,7 +36,7 @@ Either,
 
 - Update the files manually,
 
-```bash
+```sh
 sudo -e /etc/pacman.d/mirrorlist
 sudo rm /etc/pacman.d/mirrorlist.pacnew
 ```
@@ -46,7 +46,7 @@ Or,
 - use a tool like `pacdiff` to view the changes next to each other, and select them with `vim`.
 
 
-```bash
+```sh
 sudo pacman -S pacman-contrib
 sudo pacdiff
 ```

distros/arch/pacman.md

@@ -7,13 +7,13 @@ Packages are kept in /var/cache/pacman/pkg.
 
 Delete unused old packages with:
 
-```bash
+```sh
 sudo pacman -Sc
 ```
 
 Signatures are handled by the pacman-key, initially set up with:
 
-```bash
+```sh
 sudo pacman-key --populate archlinux
 ```
 
@@ -23,31 +23,31 @@ sudo pacman-key --refresh-keys
 
 If you have usigned keys, you can refresh with:
 
-```bash
+```sh
 sudo pacman -Sc
 ```
 
 or 
 
-```bash
+```sh
 sudo pacman -Scc
 ```
 
 Reset all keys with:
 
-```bash
+```sh
 sudo rm -r /etc/pacmand.d/gnupg/ && sudo pacman-key --init
 ```
 
 If you're constantly getting 'everything corrupted, nothing upgraded', try running:
 
-```bash
+```sh
 sudo pacman -S archlinux-keyring
 ```
 
 List all orphaned packages:
 
-```bash
+```sh
 sudo pacman -Qtdq
 ```
 

distros/void/aeroplanes.md

@@ -1,6 +1,6 @@
 ---
 title: "Aeroplane Mode in Void"
-tags: [ "Void" ]
+tags: [ "void" ]
 ---
 Put your device in 'aeroplane' mode (e.g. where no trace of signal leaves it) by turning off Wi-Fi and blue-tooth.
 
@@ -9,7 +9,7 @@ su root
 sv stop wpa_supplicant bluetoothd
 ```
 
-Find your device's name with `ip a`.
+Find your device's name with `ip -color addr`.
 If unsure, try this:
 
 ```sh

distros/void/autologin.md

@@ -1,11 +1,11 @@
 ---
 title: "Void Autologin"
-tags: [ "Void" ]
+tags: [ "void" ]
 ---
 
 Make the autologin service:
 
-```bash
+```sh
 cp -R /etc/sv/agetty-tty1 /etc/sv/agetty-autologin-tty1
 ```
 

distros/void/brand_name_wallpaper.md

@@ -7,24 +7,24 @@ To automatically stick the logo onto your background, do these commands in the d
 
 Get the void linux logo from wikipedia
 
-```bash
+```sh
 wget https://upload.wikimedia.org/wikipedia/commons/thumb/0/02/Void_Linux_logo.svg/256px-Void_Linux_logo.svg.png?20170131170632
 ```
 
 Rename it, and resize it (the standard size is too small for most wallpapers)
 
-```bash
+```sh
 convert -resize 200% '256px-Void_Linux_logo.svg.png?20170131170632' void-logo.png
 ```
 Download a pretty wallpaper
 
-```bash
+```sh
 wget http://wallpapercave.com/wp/Wlm9Gv0.jpg
 ```
 
 Put the void logo on all *jpg and *png images
 
-```bash
+```sh
 for x in *.jpg
 	do
 	composite -compose multiply -gravity Center void-logo.png "$x" "$x"

distros/void/extrace.md

@@ -1,6 +1,6 @@
 ---
 title: "extrace"
-tags: [ "Void" ]
+tags: [ "void" ]
 ---
 Monitor all processes:
 

distros/void/sv.md

@@ -1,18 +1,18 @@
 ---
 title: "sv"
-tags: [ "Void" ]
+tags: [ "void" ]
 ---
 # List Services
 
 All possible services are in:
 
-```bash
+```sh
 ls /etc/sv
 ```
 
 The computer only uses those in /var/service, so symbolic links are made to start and stop services.
 
-```bash
+```sh
 ls /var/service
 ```
 
@@ -20,13 +20,13 @@ ls /var/service
 
 Enable the sshd service, so that ssh will work every time you boot up:
 
-```bash
+```sh
 sudo ln -s /etc/sv/sshd /var/service
 ```
 
 Then start the service:
 
-```bash
+```sh
 sudo sv start sshd
 ```
 
@@ -34,19 +34,19 @@ sudo sv start sshd
 
 Stop `mpd` with:
 
-```bash
+```sh
 sudo sv stop mpd
 ```
 
 And stop it automatically loading at startup with:
 
-```bash
+```sh
 sudo rm /var/service/mpd
 ```
 
 You can also just make a file called 'down':
 
-```bash
+```sh
 sudo touch /var/service/mpd/down
 ```
 
@@ -63,7 +63,7 @@ If unsure, use `#!/bin/bash` as the first line.  When Void Linux says `sh`, it m
 
 Confirm the shell you'll use:
 
-```bash
+```sh
 ls -l $(which sh)
 ```
 

distros/void/void_basics.md

@@ -1,12 +1,12 @@
 ---
 title: "Void Linux Basics"
-tags: [ "Void" ]
+tags: [ "void" ]
 ---
 # Updates
 
 Update all packages with
 
-```bash
+```sh
 sudo xbps-install -Su
 ```
 
@@ -17,7 +17,7 @@ See [xbps](xbps.md) for more.
 Void keeps *every* version of everything you install, so you can roll back to them.
 Remove old packages with:
 
-```bash
+```sh
 sudo xbps-remove -O
 ```
 
@@ -25,19 +25,19 @@ sudo xbps-remove -O
 
 Old Void kernels are left on the boot partition.  List them with:
 
-```bash
+```sh
 vkpurge list
 ```
 
 Remove one with:
 
-```bash
+```sh
 vkpurge 2.8.2_4
 ```
 
 Remove all but the latest with:
 
-```bash
+```sh
 vkpurge rm all
 ```
 
@@ -48,7 +48,7 @@ You can change this number to change the screen brightness.
 
 For an easy utility, install `brightnessctl`.
 
-```bash
+```sh
 brightnessctl s 10%-
 brightnessctl s 10%+
 ```
@@ -57,5 +57,5 @@ brightnessctl s 10%+
 
 - [autologin](autologin.md)
 - [services](sv.md)
-- [wifi](wpa_cli.md)
+- [wifi](../../networking/wpa_supplicant.md)
 

distros/void/xbps.md

@@ -1,55 +1,55 @@
 ---
 title: "xbps"
-tags: [ "Void" ]
+tags: [ "void" ]
 ---
 ## Search
 
 Look for cowsay in the repository:
 
-```bash
+```sh
 xbps-query --repository --search cowsay
 ```
 
 Short version:
 
-```bash
+```sh
 xbps-query -Rs cowsay
 ```
 
 Search with regex:
 
-```bash
+```sh
 xbps-query --regex -Rs 'cow(s)?\w'
 ```
 
 List what's required for cowsay
 
-```bash
+```sh
 xbps-query -x cowsay
 ```
 
 What packages are orphaned (i.e. installed as a dependency for another package, which has since been removed)?
 
-```bash
+```sh
 xbps-query -O
 ```
 
 Show cowsay's dependencies.
 
-```bash
+```sh
 xbps-query -x cowsay
 ```
 
 This shows `perl`.
 To see what else depends on perl:
 
-```bash
+```sh
 xbps-query -X perl
 ```
 
 List all manually installed software.
 
-```bash
+```sh
 xbps-query -m
 ```
 
@@ -57,14 +57,14 @@ xbps-query -m
 
 Install cowsay
 
-```bash
+```sh
 xbps-install cowsay
 ```
 
 Upgrade current packages.
 `-R` looks at repositories, `-s` makes a sloppy search (for rough matches).
 
-```bash
+```sh
 xbps-install -Suv
 ```
 
@@ -72,19 +72,19 @@ xbps-install -Suv
 
 Remove cowsay
 
-```bash
+```sh
 xbps-remove cowsay
 ```
 
 ...and all dependencies
 
-```bash
+```sh
 xbps-remove -R cowsay
 ```
 
 Remove all orphaned dependencies.
 
-```bash
+```sh
 xbps-remove -o
 ```
 
@@ -94,19 +94,19 @@ Show information about cowsay
 
 Reinstall cowsay
 
-```bash
+```sh
 xbps-install -f cowsay
 ```
 
 Look for broken packages.
 
-```bash
+```sh
 sudo xbps-pkgdb -a
 ```
 
 And if you've found any, you might reconfigure all packages forcefully:
 
-```bash
+```sh
 sudo xbps-reconfigure -af
 ```
 

hardware/keyboard.md

@@ -9,8 +9,9 @@ This works everywhere, including in a bare-ass tty.
 
 Select a keymap, and create a new custom map.
 
-```bash
+```sh
 su root
+ls /usr/share/kbd/keymaps/i386/qwerty/
 
 basemap=/usr/share/kbd/keymaps/i386/qwerty/pl1.map.gz
 newmap=/usr/share/kbd/keymaps/custom.map.gz
@@ -22,7 +23,7 @@ gunzip -c $basemap | \
 
 Tell the system to use this keymap at startup by naming it in the `rc.conf` file:
 
-```bash
+```sh
 echo "KEYMAP=$newmap" >> /etc/rc.conf
 
 cat /etc/rc.conf
@@ -33,24 +34,24 @@ reboot
 
 Set layout to British English.
 
-```bash
+```sh
 setxkbmap -layout gb
 ```
 
 Or Polish with:
 
-```bash
+```sh
 setxkbmap -layout pl
 ```
 
 | Language | short |
-|:--------|:------|
+|:---------|:------|
-| Polish  | pl |
+| Polish   | `pl`  |
-| Serbian | rs |
+| Serbian  | `rs`  |
 
 Set 'alt + shift', as the command which cycles through the British English, Polish and Serbian keyboard layout.
 
-```bash
+```sh
 setxkbmap -layout gb,pl,rs -option grp:alt_shift_toggle
 ```
 

networking/bad_horse.md

@@ -0,0 +1,20 @@
+---
+title: "Mapping the Net"
+tags: [ "networking", "graph", "fun" ]
+---
+
+Find the path to a domain:
+
+```sh
+domain=bad.horse
+max_hops=50
+
+tracepath -m $maximum_hops $domain
+```
+
+If you're on Debian, you can use `graph-easy` and `dothost` to make an instant diagram:
+
+```sh
+domain=dice.camp
+dothost $domain | graph-easy --boxart
+```

networking/fail2ban.md

@@ -1,11 +1,11 @@
 ---
 title: "fail2ban"
-tags: [ "Networking" ]
+tags: [ "networking" ]
 requires: [ "ssh" ]
 ---
 # SSH Daemon Jail
 
-```bash
+```sh
 sudo cp /etc/fail2ban/jail.conf /etc/fail2ban/jail.d/ssh.local
 ```
 
@@ -17,15 +17,15 @@ ignoreip = 127.0.0.1/8 ::1,192.168.0.0/16 ::1
 
 ```
 
-```bash
+```sh
 sudo systemctl restart fail2ban
 ```
 
-```bash
+```sh
 sudo fail2ban-client status
 ```
 
-```bash
+```sh
 sudo fail2ban-client status sshd
 ```
 

networking/graph-easy.md

@@ -1,6 +1,6 @@
 ---
 title: "Easy Network Graph"
-tags: [ "Networking" ]
+tags: [ "networking" ]
 ---
 Set up a file like this, called `troubleshooting.txt`.
 
@@ -18,7 +18,7 @@ Set up a file like this, called `troubleshooting.txt`.
 
 Then translate it with:
 
-```bash
+```sh
 graph-easy troubleshooting.txt --as boxart
 ```
 

networking/iptables.md

@@ -1,6 +1,6 @@
 ---
 title: "iptables"
-tags: [ "Networking" ]
+tags: [ "networking" ]
 ---
 # Intro
 
@@ -8,7 +8,7 @@ This is a basic Linux firewall program.
 
 Look at your firewalls:
 
-```bash
+```sh
 iptables -L
 ```
 
@@ -18,7 +18,7 @@ We see the output of input, output and forwarding rules.
 
 I don't need any forwarding, so I'm going to drop all forwarding:
 
-```bash
+```sh
 iptables -P FORWARD DROP
 ```
 
@@ -26,17 +26,17 @@ iptables -P FORWARD DROP
 
 Let's 'A'dd, or 'A'ppend a rule with -A.  Let's drop all input from a nearby IP 
 
-```bash
+```sh
 iptables -A INPUT -s 192.168.0.23 -j DROP
 ```
 
 Or we can block all input from a particular port on the full Network.
 
-```bash
+```sh
 iptables -A INPUT -s 192.168.0.0/24 -p tcp --destination-port 25 -j DROP
 ```
 
-```bash
+```sh
 iptables -A INPUT --dport 80 -j ACCEPT
 ```
 
@@ -47,13 +47,13 @@ However, rules are accepted in order - so a packet cannot be rejected and then a
 
 To delete rule 2 from the INPUT chain:
 
-```bash
+```sh
 iptables -D INPUT 3
 ```
 
 Alternatively, you can 'I'nsert a rule at the start, rather than 'A'ppending it.
 
-```bash
+```sh
 iptables -I INPUT -s 192.168.0.13 DROP
 ```
 
@@ -67,7 +67,7 @@ The -j flag accepts ACCEPT/REJECT/DROP.  The last two are identical except that
 
 Flush all existing rules with:
 
-```bash
+```sh
 iptables -F
 ```
 

networking/nmap.md

@@ -1,11 +1,11 @@
 ---
 title: "nmap"
-tags: [ "Networking" ]
+tags: [ "networking" ]
 ---
 
 Example:
 
-```bash
+```sh
 nmap 192.168.1.1/24
 ```
 
@@ -17,6 +17,6 @@ Flags:
 
 Look for a web server, which has ports 80 and 443 open:
 
-```bash
+```sh
 nmap 192.168.1.1/24 -p 80,443 --open
 ```

networking/pi-hole-server.md

@@ -1,24 +1,24 @@
 ---
 title: "pi-hole-server"
-tags: [ "Distros" ]
+tags: [ "distros" ]
 ---
 # Installation
 
 ## Arch
 
-```bash
+```sh
 yay -S pi-hole-server
 ```
 
-```bash
+```sh
 sudo systemctl enable --now pihole-FTL
 ```
 
-```bash
+```sh
 sudo systemctl disable --now systemd-resolved
 ```
 
-```bash
+```sh
 sudo rm -f /dev/shm/FTL-\*
 ```
 
@@ -26,32 +26,32 @@ sudo rm -f /dev/shm/FTL-\*
 
 Debian has a long, boring setup.
 
-```bash
+```sh
 sudo apt-get install wget curl net-tools gamin lighttpd lighttpd-mod-deflate
 curl -sSL https://install.pi-hole.net | PIHOLE_SKIP_OS_CHECK=true sudo -E bash
 ```
 
 # Setup
 
-```bash
+```sh
 sudo usermod -aG pihole $USER
 ```
 
 Remove that google dns server.
 
-```bash
+```sh
 pihole -a setdns 9.9.9.9 1.0.0.1
 ```
 
 Disable pihole password by setting a blank password.
 
-```bash
+```sh
 pihole -a -p
 ```
 
 Get a new list of blocked domains, then reload:
 
-```bash
+```sh
 pihole -g -r
 ```
 
@@ -61,13 +61,13 @@ Every so often, run `pihole -g` again (perhaps put it in crontab).
 
 Observe the pihole's output while you ask it a question:
 
-```bash
+```sh
 pihole -t
 ```
 
 Then ask the question from another computer:
 
-```bash
+```sh
 dig @[ pihole ip ] archlinux.org
 ```
 

networking/port_scan.md

@@ -0,0 +1,25 @@
+---
+title: "Port Scan"
+tags: [ "networking" ]
+repo: 'https://github.com/mrjackwills/havn/'
+---
+
+`havn` scans ports.
+It's not in many repos, but if you can `cargo install havn`.
+
+
+```sh
+havn -h
+havn -a
+domain=splint.rs
+havn -p 19-90 ${domain}
+```
+
+That last command doesn't work reliably, so increase the number of retries (`-r`), or decrease concurrent requests (`-c`).
+
+
+```sh
+havn -p 19-443 -r 6 ${domain}
+havn -p 1-1000 -c 500 -r 5 ${domain}
+```
+

networking/rclone.md

@@ -1,6 +1,6 @@
 ---
 title: "rclone"
-tags: [ "Networking" ]
+tags: [ "networking", "synch" ]
 ---
 The manpage's 'Synopsis' provides a fast reference.
 ```
@@ -9,71 +9,71 @@ We'll assume a folder in Google Drive called 'test', and local folder called 'fo
 
 Generate a config file with:
 
-```bash
+```sh
 rclone config
 ```
 
 Look at the contents of Google Drive:
 
-```bash
+```sh
 rclone ls gd:/
 ```
 
 If rclone loses authorization:
 
-```bash
+```sh
 rclone authorization
 ```
 
 List only directories:
 
-```bash
+```sh
 rclone lsf -dirs-only google:/
 ```
 
 Mount the remote location on /tmp/google with:
 
-```bash
+```sh
 rclone mount google /tmp/google
 ```
 
 Copy the contents of 'foo' to 'test'.
 
-```bash
+```sh
 rclone copy foo/ google:test
 ```
 
 Sync contents of foo and test with a progress bar (will delete Google items):
 
-```bash
+```sh
 rclone sync foo google:test -P
 ```
 
 Remove all duplicates
 
-```bash
+```sh
 rclone dedupe google:test
 ```
 
 Delete contets of a remote file:
 
-```bash
+```sh
 rclone delete n:test
 ```
 
 Or delete the folder and contents as well:
 
-```bash
+```sh
 rclone purge n:test
 ```
 
 Copy to and from with:
 
-```bash
+```sh
 rclone copyto google:test foo
 ```
 
 or
 
-```bash
+```sh
 rclone copyto foo google:test

networking/scraping/copy_website.md

@@ -3,7 +3,7 @@ title: "Download Website"
 tags: [ "networking", "scraping" ]
 ---
 
-```bash
+```sh
 domain=splint.rs
 mkdir $domain
 cd $domain

networking/scraping/youtube-dl.md

@@ -1,28 +1,28 @@
 ---
 title: "Download videos"
-tags: [ "Scraping" ]
+tags: [ "scraping" ]
 ---
 Install `yt-dlp`.
 
-```bash
+```sh
 yt-dlp --write-auto-sub *<URL>*
 ```
 
 It will default to English, but you can specify another language with the flag --sub-lang:
 
-```bash
+```sh
 youtube-dl --sub-lang sv --write-auto-sub *<URL>*
 ```
 
 You can list all available subtitles with:
 
-```bash
+```sh
 yt-dlp --list-subs *<URL>*
 ```
 
 It's also possible to skip the video and only download the subtitle if you add the flag --skip-download:
 
-```bash
+```sh
 yt-dlp --sub-lang sv --write-auto-sub --skip-download *<URL>*
 ```
 

networking/servers/agate.md

@@ -1,6 +1,6 @@
 ---
 title: "Agate on Arch Linux"
-tags: [ "Networking", "Arch", "Gemini" ]
+tags: [ "networking", "arch", "gemini" ]
 ---
 
 Docs are [here](https://github.com/mbrubeck/agate).

networking/servers/dns.md

@@ -15,12 +15,12 @@ tags: [ "networking", "host" ]
 
 Query a host with the `host` command.
 
-```bash
+```sh
 host $domain.$tld
 ```
 
 
-```bash
+```sh
 host $domain.$tld 9.9.9.9
 ```
 
@@ -34,7 +34,7 @@ You can also add a specific nameserver:
 
 Request a specific record type (`CNAME`, `TXT`, et c.):
 
-```bash
+```sh
 torsocks host -T -t $RECORD_TYPE $domain
 ```
 

networking/ssh.md

@@ -7,7 +7,7 @@ tags: [ "networking" ]
 Try out basic ssh by accessing `git.charm.sh`, without needing authentication:
 
 
-```bash
+```sh
 ssh git.charm.sh
 ```
 
@@ -16,32 +16,32 @@ The ssh server is sometimes in a package called `openssh`, and sometimes only in
 
 Once it's installed, check it's working:
 
-```bash
+```sh
 sudo systemctl status ssh
 ```
 
 If that doesn't work, the service may be called `sshd`.
 
-```bash
+```sh
 sudo systemctl status sshd
 ```
 
 Then start that service:
 
-```bash
+```sh
 sudo systemctl start sshd
 ```
 Test it works by using ssh into your own system, from inside:
 
 
-```bash
+```sh
 ssh $USER@localhost
 ```
 
 Access the computer from another computer on the same local network by finding your computer's IP address.
 
 
-```bash
+```sh
 ip address | grep inet
 ```
 
@@ -56,24 +56,24 @@ Here is mine:
 
 
 The first one starts `127`, which means it returns back to that computer (like `localhost`).
-The second is an ipv6 address, which is too angelic for this world, and has yet to ascend.
+The second is an ipv6 address, which is too angelic for this world, and has yet to descend.
 The third will work from a remote computer.
 
 
-```bash
+```sh
 ssh $USERNAME@IP_ADDRESS
 ```
 
 Once you have that, generate some ssh keys:
 
-```bash
+```sh
 ssh-keygen
 ```
 
 Look at your keys:
 
 
-```bash
+```sh
 ls ~/.ssh
 ```
 
@@ -82,7 +82,7 @@ The other is secret.
 
 Now send those keys to a remote computer:
 
-```bash
+```sh
 ssh-copy-id $USERNAME@IP_ADDRESS
 ```
 

networking/ssh/sshfs.md

@@ -1,11 +1,11 @@
 ---
 title: "sshfs"
-tags: [ "Networking" ]
+tags: [ "networking" ]
 requires: [ "ssh" ]
 ---
 # Mount 
 
-```bash
+```sh
 sshfs $USER@$IP_ADDRESS:$DIR
 ```
 
@@ -16,7 +16,7 @@ Various flags:
 
 # Unmount
 
-```bash
+```sh
 fusermount3 -u $DIR
 ```
 

networking/ssh/tricks.md

@@ -1,30 +1,30 @@
 ---
 title: "ssh-tricks"
-tags: [ "Networking", "ssh", "tricks" ]
+tags: [ "networking", "ssh", "tricks" ]
 requires: [ "ssh" ]
 ---
 
 Mount a remote filesystem locally with fuse-sshfs:
 
-```bash
+```sh
 sshfs *user*@192.168.0.10:/home/*user* /tmp/mnt
 ```
 
 Unmount with:
 
-```bash
+```sh
 fusermount -u /tmp/mnt
 ```
 
 Set it up on /etc/fstab with:
 
-```bash
+```sh
 sshfs#bkp@bkp.a-server.ninja:/media/store1/bkp /backup fuse defaults,allow_other,reconnect,delay_connect 0 0
 ```
 
 Make image backup of sda1 and sda2 from one machine and pass it through ssh to another.
 
-```bash
+```sh
 for i in {1,2};do sudo dd if=/dev/sda$i | ssh -C *user*@192.168.0.10 "dd of=/mnt/Backup/winback-oct-\"$i\".img" status=progress; done
 ```