include markdown as a variable

Makefile

@@ -5,6 +5,8 @@ PAGER ?= less -Ri
 READER != command -v mdless bat glow less more pg | head -1
 FZF != command -v fzf sk | head -1
 
+markdown = $(wildcard */*.md */*/*.md)
+
 ifeq "$(FZF)" ""
   $(info Install fzf)
 endif
@@ -40,7 +42,7 @@ include cmd.mk
 	printf '%s\n' '%type: wordcount int' >> $@
 	printf '%s\n\n' '%sort: wordcount' >> $@
 
-.dbs/new.rec: $(wildcard */*.md */*/*.md) | .dbs/head.rec
+.dbs/new.rec: $(markdown) | .dbs/head.rec
 	$(info Updating: $?)
 	grep -q guide $@ 2>/dev/null || cp $| $@
 	@-$(foreach entry, $?, \
@@ -68,6 +70,7 @@ include cmd.mk
 	sed '/^%/d' $^ | recsel -G path | recsel -U >> $@
 
 default += db.rec
+ignored += db.rec
 db.rec: command.rec .dbs/notes.rec
 	recinf -d $< > $@
 	echo '' >> $@
@@ -75,7 +78,7 @@ db.rec: command.rec .dbs/notes.rec
 	$(info Making main database: $@)
 
 
-.git/info/exclude: $(default)
+.git/info/exclude: $(ignored)
 	@echo $^ | tr ' ' '\n' > $@
 
 default += .git/info/exclude

README.md

@@ -38,11 +38,6 @@ The output is a couple of lines of code, with changeable components as variables
 alias rrc='$PAGER "$(find . -maxdepth 2 -name "*rc" | fzf)"'
 ```
 
-### Guides
-
-The notes are mostly written like a heavily commented script.
-Most are setup guides.
-
 ### The Function
 
 Running `make function` outputs a shell function which searches through this
@@ -133,6 +128,16 @@ grep ls --color=always $HISTFILE | $PAGER
 
 Now we can see what can be changed.
 
+### Aim to Script
+
+Guides should read like a heavily commented script, so CLI commands are preferred to GUI commands.
+
+- Bad: '*edit the file `.config/tspreed/tspreed.rc` and change `focuscolor` to '2'.*'
+- Good: `sed -i '/focuscolor/s/=1/=2/' ~/.config/tspreed/tspreed.rc`
+    * `cat !$`
+
+Despite being 'script-like', interactive bash commands like `cat !$` are still fine just to show how to double-check results when setting things up interactively.
+
 ### Show, Don't Tell
 
 Articles should say what to type, not the output.

chat/profanity.md

@@ -41,7 +41,7 @@ Check your `~/.config/profanity/profrc` for how to data's saved.
 
 ## Automatically Sign In
 
-To automatically sign in, add your password to [pass](../data/pass.md).
+To automatically sign in, add your password to [pass](data/pass.md).
 
 ```
 /account set ${name}@${host} eval_password pass *xmpp*

chat/send_email.md

@@ -0,0 +1,76 @@
+---
+title: Send an email with a CLI command
+tags: 
+- email
+requires:
+- data/pass.md
+---
+
+# Setup the Config
+
+Install `msmtp` and set up the defaults.
+
+```sh
+mkdir ~/.config/msmtp/
+cat > ~/.config/msmtp/config << EOF
+defaults
+tls on
+auth on
+
+EOF
+```
+
+You'll need to fill in some variables, like your provider's hostname and SMTP port.
+The `${pass_name}` is just the `pass` command which gives your email password.
+
+```sh
+name=posteo
+host=posteo.de
+port=587
+user=bob@posteo.net
+pass_name=posteo.net
+```
+
+With those in, add that default account.
+
+
+```sh
+cat >> ~/.config/msmtp/config << EOF
+
+account ${name}
+host ${host}
+port ${port}
+user ${user}
+from ${user}
+passwordeval pass ${pass_name}
+
+```
+
+Finally, set this as the default account:
+
+
+```sh
+account default : ${account} >> ~/.config/msmtp/config
+```
+
+# Write an Email
+
+Fill out the headers in a file called `mail`.
+
+```
+From: MSMTP ${user}
+Subject: Pipes
+To: ${recipient_name} <${recipient_email}>
+
+A pipe gives a wise man time to think and a fool something to stick in his
+mouth.
+```
+
+# Send
+
+Send the email:
+
+```sh
+msmtp -t bindrpg@posteo.uk < mail
+```
+

command.rec

@@ -10,27 +10,27 @@ shell: sh
 bin: column
 tag: format
 
-aim: Reformat file with an explicit separator (`-s`)
+aim: Reformat user accounts with an explicit separator (`-s`)
 cmd: column -ts: /etc/passwd
 shell: sh
 bin: column
 tag: format
 
-aim: Sort lines into columns with names
+aim: Sort user accounts into columns with names
 cmd: column -ts: -N User,PW,UID,GID,Description,Home,shell -H PW,GID /etc/passwd
 note: Hide some columns with `-H`.
 shell: sh
 bin: column
 tag: format
 
-aim: Sort lines into columns and reorder them
+aim: Sort user accounts into columns and reorder them
 cmd: column -ts: -N User,PW,UID,GID,Description,Home,shell -H PW,GID -O User,Description,shell /etc/passwd 
 note: Unspecified items remain.
 shell: sh
 bin: column
 tag: format
 
-aim: Output to json format with `-J`
+aim: Output user accounts in json format with `-J`
 cmd: column -J -ts: -H PW,GID,shell -N User,PW,UID,GID,Description,Home,shell /etc/passwd
 shell: sh
 bin: column
@@ -115,7 +115,6 @@ bin: ntpd
 tag: time
 tag: system
 
-
 aim: Check a service
 cmd: sudo systemctl status mpd
 shell: sh
@@ -123,7 +122,6 @@ bin: systemd
 tag: system
 tag: service
 
-
 aim: Recognize service changes
 cmd: sudo systemctl daemon-reload
 shell: sh
@@ -131,7 +129,6 @@ bin: systemd
 tag: system
 tag: service
 
-
 aim: Start a service (it stops when the computer shuts down)
 cmd: sudo systemctl taskd.service start
 + sudo systemctl daemon-reload
@@ -140,7 +137,6 @@ bin: systemd
 tag: system
 tag: service
 
-
 aim: Find out why the computer takes so long to start
 cmd: sudo systemd-analyze
 + sudo systemd-analyze blame
@@ -149,7 +145,6 @@ bin: systemd
 tag: system
 tag: boot
 
-
 aim: See what the computer is doing
 cmd: journalctl -f
 shell: sh
@@ -188,7 +183,6 @@ shell: sh
 bin: journalctl
 tag: system
 
-
 aim: Convert markdown table to csv
 cmd: mlr --imarkdown --ocsv cat ${file}.md
 bin: mlr
@@ -359,7 +353,6 @@ tag: vision
 tag: video
 shell: sh
 
-
 aim: Convert video to audio
 cmd: ffmpeg -i ${input}.mp4 -vn ${output}.mp3
 bin: ffmpeg
@@ -375,7 +368,6 @@ bin: ffmpeg
 tag: vision
 shell: sh
 
-
 aim: Change resolution
 cmd: ffmpeg -i ${input}.mp4 -filter:v scale=1280:720 -c:a copy ${output}.mp4
 bin: ffmpeg
@@ -437,6 +429,13 @@ cmd: urldecode() { echo -e "${@//%/\\x}"; }
 tag: web
 shell: bash
 
+aim: Choose which parts to commit with git
+cmd: git commit -p
+note: Use `P` to see big changes which cannot fit on the screen.
+tag: comfy
+bin: git
+shell: sh
+
 aim: Request a definition from the terminal.
 cmd: word='abderian'
 + curl -s dict://dict.org/define:${word}:
@@ -453,3 +452,24 @@ tag: writing
 tag: comfy
 tag: dict
 shell: sh
+
+aim: Email a pull request which points to your git server
+tag: git
+bin: git
+tag: email
+tag: pr
+cmd: repo=ssh://soft.dmz.rs:2222/mkdots/
++ theirHead='HEAD^^^^'
++ head=master
++ git request-pull "${theirHead}" "${repo}" "${head}"
+note: You can note where your branch diverged from theirs with a commit hash,
++ or a relative position, like `HEAD^^` (e.g. 'two commits before your latest').
+
+aim: Clean up a bloated git repo
+cmd: git fsck --full
++ git gc --prune=now --aggressive
++ git repack
+bin: git
+tag: maintenance
+shell: sh
+

data/archives.md

@@ -10,7 +10,7 @@ tags:
 Combine many files and directories into a single t-archive file.
 
 ```sh
-tar cf "$ARCHIVE".tar $DIR
+tar cf "${archive}".tar ${dir}
 ```
 You can remember this with the mnemonic '*C*reate *F*ile'.
 
@@ -18,13 +18,13 @@ Unfortunately, this stores the full file path, so making a tar archive of `/etc/
 It's often better to tell tar which path to start from using the `-C` flag.
 
 ```sh
-tar cf "$ARCHIVE".tar -C /etc/ nginx
+tar cf "${archive}".tar -C /etc/ nginx
 ```
 
 Check the contents of your archive with:
 
 ```sh
-tar tf "$ARCHIVE".tar
+tar tf "${archive}".tar
 ```
 
 If you want to store 'everything in a directory', then using `*` will not work, because it will target everything in the *current* directory.
@@ -33,7 +33,7 @@ Instead, you can store the target in a variable:
 
 ```sh
 files=$(ls /etc/nginx)
-tar cf "$ARCHIVE".tar -C /etc/nginx/ $file
+tar cf "${archive}".tar -C /etc/nginx/ $file
 ```
 
 # Extract
@@ -41,7 +41,7 @@ tar cf "$ARCHIVE".tar -C /etc/nginx/ $file
 Extract the tar archive with
 
 ```sh
-tar xf "$ARCHIVE".tar
+tar xf "${archive}".tar
 ```
 
 You can remember this with the mnemonic 'e*X*tract *F*ile'.
@@ -51,7 +51,7 @@ You can remember this with the mnemonic 'e*X*tract *F*ile'.
 Create a zip-compressed archive with the `z` flag.
 
 ```sh
-tar czf "$ARCHIVE".tgz -C /etc/nginx/ $file
+tar czf "${archive}".tgz -C /etc/nginx/ $file
 ```
 
 You can use any file ending you want, but sane people like to use '.tgz' or '.tar.tgz'.

data/git/cleanup.md

@@ -1,22 +0,0 @@
----
-title: Clean up a bloated git repo
-tags: 
-- data
-- setup
-requires: 
-- data/git.md
----
-
-
-```sh
-git fsck --full
-```
-
-```sh
-git gc --prune=now --aggressive
-```
-
-```sh
-git repack
-```
-

data/gpg.md

@@ -132,7 +132,7 @@ Refreshing keys will tell you if some key you have contains a signature from som
 gpg --refresh-keys
 ```
 
-You can use the [crontab](../../system/cron.md) to refresh keys, but this will mostly fail, since keyservers often don't hold the right data.
+You can use the [crontab](system/cron.md) to refresh keys, but this will mostly fail, since keyservers often don't hold the right data.
 
 # Export
 

data/gpg/vim_decryption.md

@@ -1,5 +1,5 @@
 ---
-title: Edit gpg encrypted files easily
+title: Edit gpg encrypted files with vim
 tags: 
 - vim
 - data

data/pass.md

@@ -8,7 +8,7 @@ requires:
 - data/gpg.md
 ---
 
-Setup [gpg](gpg.md) keys.
+Setup [gpg](data/gpg.md) keys.
 
 Show your gpg secret it:
 
@@ -19,28 +19,37 @@ gpg --list-secret-keys
 Then use the id number under `sec` to make a pass repo:
 
 ```sh
-KEY="$(gpg --list-secret-keys  | grep -m 1 -A1 '^sec' | tail -n 1)"
+key="$(gpg --list-secret-keys  | grep -m 1 -A1 '^sec' | tail -n 1)"
 ```
 
 ```sh
-pass init $KEY
+pass init $key
+cat .password-store/.gpg-id
 ```
 
-To add a basic password, e.g. for `$WEBSITE`:
+To add a basic password, e.g. for `${website}`:
 
 ```sh
-pass $WEBSITE
+pass ${website}
 ```
 
 To insert a multi-line password, e.g. with a login name:
 
 ```sh
-pass add -m $WEBSITE
+pass add -m ${website}
 ```
 
 Remove a password:
 
 ```sh
-pass rm $WEBSITE
+pass rm ${website}
 ```
 
+You can generate passwords with `xkcdpass`.
+
+Automatically insert a password with `pass insert`:
+
+
+```sh
+xkcdpass | pass insert --echo ${website}
+```

data/pdf-to-txt.md

@@ -1,5 +1,5 @@
 ---
-title: pdf to txt
+title: Convert a scanned pdf to text
 tags: 
 - data
 - pdf

data/radicale.md

@@ -44,10 +44,11 @@ You might get it in the `apache` package or similar.
 `htpasswd` allows you to generate passwords for users, and place them in `/etc/radicale/users`.
 
 ```sh
-PASS="$(xkcdpass)"
+pass="$(xkcdpass)"
-htpasswd -nb $USER "$PASS" | sudo tee -a /etc/radicale/users
+username=alice
-echo "Your username is $USER"
+htpasswd -nb ${username} "${pass}" | sudo tee -a /etc/radicale/users
-echo "Your password is $PASS"
+echo "Your username is ${username}"
+echo "Your password is ${pass}"
 ```
 Right now, you can't sign into the server except through the localhost, which is pointless.
 So now we add a subdomain to `nginx`.
@@ -97,8 +98,8 @@ sudo ln -s /etc/nginx/sites-available/radicale /etc/nginx/sites-enables/
 Finally, replace the example `DOMAIN` with your actual domain name.
 
 ```sh
-DOMAIN=whatever.com
+domain=whatever.com
-sudo sed -i "s/DOMAIN/$DOMAIN/g" /etc/nginx/sites-available/radicale 
+sudo sed -i "s/DOMAIN/${domain}/g" /etc/nginx/sites-available/radicale 
 ```
 
 (optional: replace that `cal.` prefix with anything else)
@@ -111,7 +112,7 @@ sudo nginx -t
 You will almost certainly need a new SSL certificate for the site:
 
 ```sh
-sudo certbod -d cal.$DOMAIN
+sudo certbod -d cal.${domain}
 ```
 
 Start or restart both services:

data/sc-im.md

@@ -9,8 +9,6 @@ requires:
 - writing/vim.md
 ---
 
-- [Sample file](sc-im/sample.sc)
-
 # Basic Commands
 
 ## See Cells

data/search_system.md

@@ -26,7 +26,7 @@ Once you have the database, you can find nearly any file instantly.
 - Search for jpg images with 'dog' or 'Dog' in the name: `locate -i dog jpg`
 - Search for videos: `plocate --regex '.mp4$|.mkv$|.wmv$|.webm$|.mov$|.avi$'`
 
-For best results, run `updatedb` regularly, perhaps in [crontab](../system/cron.md).
+For best results, run `updatedb` regularly, perhaps in [crontab](system/cron.md).
 
 ## Search More Places
 

data/soft-serve/soft_https.md

@@ -41,7 +41,7 @@ git clone http://localhost:23232/${some_repo}.git
 
 ### `https` Setup
 
-Put this file at `/etc/nginx/sites-enabled/$DOMAIN.tld`, then set up standard certificates with [nginx](../../networking/website/nginx.md).
+Put this file at `/etc/nginx/sites-enabled/$DOMAIN.tld`, then set up standard certificates with [nginx](networking/nginx.md).
 
 (replace `${DOMAIN_NAME}` with your domain's name).
 

distros/arch/gpu.md

@@ -1,8 +1,10 @@
 ---
-title: Ach Linux GPU Setup
+title: Arch Linux GPU Setup
 tags: 
 - arch
 - GPU
+requires:
+- distros/arch/install_yay.md
 ---
 # Step 1: Multilib
 

distros/void/void_basics.md

@@ -54,9 +54,8 @@ brightnessctl s 10%-
 brightnessctl s 10%+
 ```
 
-# Other Tricks
+# Related
 
-- [autologin](autologin.md)
+- [autologin](distros/void/autologin.md)
-- [services](sv.md)
+- [services](distros/void/sv.md)
-- [wifi](../../networking/wpa_supplicant.md)
 

example.rec

@@ -83,7 +83,7 @@ content: # This data file was generated by the Spreadsheet Calculator Improvised
 
 filename: lowdown.mk
 bin: make
-usage: {{bin}} -f {{filename}}
+usage: {{bin}} -f {{filename}} example
 content: output: all
 + 
 + .PHONY: example
@@ -120,3 +120,36 @@ content: output: all
 + 
 + clean :
 + 	rm -rf public html
+
+filename: Makefile
+bin: make
+usage: make
+content: ### Variables
++ 
++ PAGER ?= $(shell command -v mdless bat less | head -1 )
++ EDITOR ?= vi
++ 
++ requirements += lowdown
++ 
++ ### Dependencies
++ 
++ out: help
++ 
++ ### Patterns
++ 
++ 
++ ### Phonies
++ 
++ .PHONY: help
++ help:
++ 	@awk 'BEGIN {FS = ":.*?## "} /^[0-9a-zA-Z._-]+:.*?## / {printf "\033[36m%s\033[0m : %s\n", $$1, $$2}' $(MAKEFILE_LIST) | \
++ 		sort | \
++ 		column -s ':' -t
++ 
++ .PHONY: check
++ check: ## Check you have the required dependencies
++ 	@$(foreach dep, $(requirements), type $(dep) >/dev/null || echo "Install $(dep)." ; )
++ 
++ .PHONY: clean
++ clean: ## Remove generated files.
++ 	$(RM) $(defaults)

hardware/printers.md

@@ -3,9 +3,10 @@ title: printers
 tags: 
 - hardware
 ---
+
 # Cups: The Common Unix Printing System
 
-Configure cups at /etc/cups/supsd.conf, or visit the local webpage at http://localhost:631 if you want to use the Apple interface, otherwise, it's the printing daemon.
+Configure cups at `/etc/cups/supsd.conf`, or visit the local webpage at http://localhost:631 if you want to use the Apple interface, otherwise, it's the printing daemon.
 
 # The Printing Daemon
 

networking/dns_records.md

@@ -12,7 +12,7 @@ tags:
 | CNAME       | Alternative Address | "$domain".rs, "$subdomain.$domain".com |
 | NS          | Nameserver          | ns1.fastname.com                       |
 | MX          | Email server        | "$domain".com                          |
-| TXT         | Literally anything,including ownership of a domain | -       |
+| TXT         | Literally anything  | "drunk giraffes can't spell"           |
 
 Query a host's IP and email handlers with the `host` command.
 

networking/rclone.md

@@ -3,6 +3,7 @@ title: rclone
 tags: 
 - networking
 - synch
+- backup
 ---
 The manpage's 'Synopsis' provides a fast reference.
 ```

networking/scraping/copy_website.md

@@ -3,6 +3,7 @@ title: Download Website
 tags: 
 - networking
 - scraping
+- web
 ---
 
 ```sh

networking/scraping/youtube-dl.md

@@ -2,29 +2,30 @@
 title: Download videos
 tags: 
 - scraping
+- video
 ---
 Install `yt-dlp`.
 
 ```sh
-yt-dlp --write-auto-sub *<URL>*
+yt-dlp --write-auto-sub ${url}
 ```
 
 It will default to English, but you can specify another language with the flag --sub-lang:
 
 ```sh
-youtube-dl --sub-lang sv --write-auto-sub *<URL>*
+youtube-dl --sub-lang sv --write-auto-sub ${url}
 ```
 
 You can list all available subtitles with:
 
 ```sh
-yt-dlp --list-subs *<URL>*
+yt-dlp --list-subs ${url}
 ```
 
 It's also possible to skip the video and only download the subtitle if you add the flag --skip-download:
 
 ```sh
-yt-dlp --sub-lang sv --write-auto-sub --skip-download *<URL>*
+yt-dlp --sub-lang sv --write-auto-sub --skip-download ${url}
 ```
 
 ## Alternative

networking/ssh.md

@@ -33,6 +33,7 @@ Then start that service:
 ```sh
 sudo systemctl start sshd
 ```
+
 Test it works by using ssh into your own system, from inside:
 
 
@@ -77,6 +78,7 @@ Look at your keys:
 
 ```sh
 ls ~/.ssh
+ls -l ~/.ssh
 ```
 
 You can share the one ending in `.pub` freely.
@@ -86,6 +88,7 @@ Now send those keys to a remote computer:
 
 ```sh
 ssh-copy-id ${username}@{ip_address}
+ssh ${username}@{ip_address}
 ```
 
 Now you can log in without a password.

networking/wifi.md

@@ -1,94 +0,0 @@
----
-title: network
-tags: 
-- networking
----
-
-# Netstat Stuff
-
-Stats on local net usage within domain.
-
-```sh
-iftop -p -n
-```
-
-```sh
-whois domain.com
-```
-
-Info on domain, whether it's taken, et c.:
-
-```sh
-dig domain.com
-```
-
-```sh
-ifconfig
-```
-
-Versatile wifi tool:
-
-```sh
-nmcli
-```
-
-# Examples
-
-You want to connect to the internet.
-
-```sh
-sudo iwconfig
-```
-
-Get knowledge of wireless state.  The output might be: 
-
-> wlp3s0    IEEE 802.11  ESSID:"Gandalf WajFaj"
-
-> Mode:Managed  Frequency:2.412 GHz  Access Point: 10:05:01:90:AC:1A
-
-> Bit Rate=144.4 Mb/s   Tx-Power=15 dBm
-
-> Retry short limit:7   RTS thr:off   Fragment thr:off
-
-> Encryption key:off
-
->          Power Management:on
-
->          Link Quality=64/70  Signal level=-46 dBm
-
->          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag
-
->          Tx excessive retries:0  Invalid misc:363   Missed beacon
-
-This tells you that your ESSID is 'Gandalf WajFaj', and the access point name is 10:05:......
-
-```sh
-nmcli radio
-```
-
-You get an overview of your radio devices.
-You're told that eth0 deals with your ethernet and `wlan0` deals with wifi.
-`wlan0` is a file which represents your wifi device.
-
-```sh
-nmcli wlan0 wifi rescan
-```
-
-```sh
-nmcli device wifi list
-```
-
-Now to connect.
-
-```sh
-nmcli device wifi connect [SSID] [your password] [wifi password]
-```
-
-Alternatively, you can use
-
-```sh
-nmcli -ask device wifi connect [SSID]
-```
-
-And it'll ask for your password, so you're not typing it in in full view.
-

networking/wireguard.md

@@ -4,10 +4,6 @@ tags:
 - networking
 - VPN
 ---
-<!--
-from 
-https://engineerworkshop.com/blog/how-to-set-up-wireguard-on-a-raspberry-pi/
--->
 
 ## On Server
 

networking/wireless.md

@@ -1,66 +0,0 @@
----
-title: wireless
-tags: 
-- networking
----
-
-Check wifi's working
-
-```sh
-lspci -k
-```
-
-Or for usb wifi: 
-
-```sh
-dmesg | grep usbcore
-```
-
-...and hopefully it'll say the new interface is registered.
-
-Check if a wifi interface has been created
-
-```sh
-ip link
-```
-
-...or
-
-```sh
-iw dev
-```
-
-Assuming it's wlan0, bring it up with 
-
-```sh
-ip link set wlan0 up
-```
-
-Error messages probably means your wireless chipset requires a firmware to function.  In this case, check the kernel messages for firmware being loaded
-
-```sh
-dmesg | grep firmware
-```
-
-# Utilities
-
-- `iw` doesn't do wpa/wpa2.
-- `iwd` does everything except WEXT encryption.
-- `wpa_supplicant` does everything.
-
-# Connecting
-
-Get the link status:
-
-```sh
-iw dev wlan0 link
-```
-
-Scan for available points:
-
-```sh
-iw dev wlan0 scan
-```
-
-The connecting commands do not cover wpa2.
-

shell/bash_tips.md

@@ -0,0 +1,70 @@
+---
+title: Bash tips
+tags: 
+- shell
+- comfy
+- bash
+---
+
+# This & That
+
+Refer to 'that last thing', and 'the first thing':
+
+```sh
+fortune -l > file1
+cat !$  | tr -d u > file2
+cat file1 !$
+diff !^ !$
+```
+
+**NB:** this can go wrong:
+
+```sh
+ls -l file1 file2
+cat !^
+```
+
+**NB:** this only works when running `bash` interactively, never in scripts.
+
+# Lists
+
+You can put a list inside any `bash` argument, and `bash` will expand that part into a new argument.
+
+```bash
+echo file {one,two,three}.txt
+echo file-{one,two,three}.txt
+touch !$
+```
+
+Look at text files:
+
+```bash
+ls *.{txt,md}
+```
+
+Look at size of jpg or png files in the `img/` directory:
+
+
+```bash
+du img/*.{jpg,png}
+```
+
+# Automatic Lists
+
+```bash
+echo {a..d}
+echo Archive_{B..E}
+```
+
+Using multiple lists works fine.
+
+```bash
+mkdir first second third
+echo {first,second,third}/file_{1..3}.txt
+x={first,second,third}/file_{1..3}.txt
+echo $x
+echo {first,second,third}/file_{1..3}.txt
+x="$(!!)"
+echo $x
+for file in $x ; do fortune > $file ; done
+```

shell/less.md

@@ -46,5 +46,5 @@ Just press `!`, e.g. `!ls`.
 
 # Edit a File
 
-While reading a file, press `v` to edit it ('v' stands of `vi`).
+While reading a file, press `v` to edit it ('v' stands for `vi`).
 

shell/shell_tips.md

@@ -5,23 +5,6 @@ tags:
 - comfy
 ---
 
-# This & That
-
-Refer to 'that last thing', and 'the first thing':
-
-```sh
-fortune -l > file1
-cat !$  | tr -d u
-diff !^ !$
-```
-
-**NB:** this can go wrong:
-
-```sh
-ls -l file1 file2
-cat !^
-```
-
 # Done
 
 `<C-d>`
@@ -29,9 +12,8 @@ cat !^
 - If you have a command, Control + d will execute the command.
 - If you have nothing, `exit`.
 
-# Clear Search Highlights
+# Search & Clear Highlights
 
-`<Esc>+u`
+You can search in many programs by using `/`.
-
+Most programs let you clearn the highlighting with `<Esc>+u`.
-Works in most programs with search.
 

system/deduplicate.md

@@ -16,7 +16,7 @@ rdfind $dir
 $EDITOR results.txt
 ```
 
-Replace the duplicated files with [hard links](../basics/hard_links.md).
+Replace the duplicated files with [hard links](system/hard_links.md).
 
 ```sh
 rdfind -makehardlinks true $dir

system/editors.md

@@ -1,25 +1,25 @@
 ---
-title: $EDITOR
+title: Setting an EDITOR
 tags: 
 - system
+- defaults
 ---
-The System's default text editor can be defined within /etc/profile.  It's given the variable `EDITOR`.
 
-Add these lines to `/etc/profile.d/custom.sh`:
+Programs expect a default 'line EDITOR' and 'VISUAL editor' so they know how you want to edit text.
+
+Add these lines to automatically set the variables in `bash`:
 
 ```sh
-echo 'export EDITOR=vim' >> /etc/profile.d/custom.sh
+echo 'export EDITOR=vim' >> ~/.bashrc
-echo 'export VISUAL=$EDITOR' >> /etc/profile.d/custom.sh
+echo 'export VISUAL=$EDITOR' >> ~/.bashrc
 ```
 
-Then reload that profile with:
+Make the change system-wide by adding them to `/etc/profile.d/custom.sh` instead, which is loaded at startup.
+
+You can add a GUI editor as the `$VISUAL` editor:
 
 ```sh
-source /etc/profile
+VISUAL=gedit
 ```
 
-If you want to ensure `nano` never appears again:
+To use a true line editor, as `$EDITOR`, see [ed][writing/ed.md].
-
-```sh
-sudo ln -sf $(which vim) $(which nano)
-```

system/makefiles.md

@@ -180,6 +180,6 @@ In this case, the makefile can see that `backup` depends on the current backup f
 
 # The Rest
 
-- [File patterns](makefiles/patterns.md)
+- [File patterns](system/makefiles/patterns.md)
-- [Makefile graphs](makefiles/graph-easy.md)
+- [Makefile graphs](system/makefiles/graph-easy.md)
-- [In-build help](makefiles/help.md)
+- [In-build help](system/makefiles/help.md)

system/makefiles/patterns.md

@@ -5,7 +5,7 @@ tags:
 - make
 ---
 
-Using the [basic example](../makefiles.md), you can make a complete backup of all backup files.
+Using the [basic example](system/makefiles.md), you can make a complete backup of all backup files.
 This file will depend upon everything inside the `$(storage_directory)`.
 Unlike `bash`, you can't just say `storage_directory/*`: the pattern must be stated as a 'wildcard'.
 

system/partitions.md

@@ -25,10 +25,10 @@ Note the asterisk marking the boot partition.
 # IDs
 
 | ID         | Meaning    |
-|----|:--------|
+|:----------:|:-----------|
-|83  |Linux    |
+| 83         |   Linux    |
-| 5  |Extended |
+| 5          |   Extended |
-| 82 |Swap     |
+| 82         |   Swap     |
 
 fdisk will not help with a GPT formatted drive.  For this, use gdisk, which is mostly the same.
 
@@ -53,14 +53,14 @@ mkreiserfs /dev/sdc2
 # File System Types
 
 | Type           | Advantages                                    | Disadvantages                                                |
-|------|:-----------|:--------------|
+|----------------|:----------------------------------------------|:-------------------------------------------------------------|
-|ext2  |            |No journaling means that the file offers no crash recovery.
+|  ext2          |                                               | No journaling means that the file offers no crash recovery.  |
-|ext3  | Journaling | 
+|  ext3          |  Journaling                                   |                                                              |
-|ext4  | Journaling and handles files of up to 16TB.| 
+|  ext4          |  Journaling and handles files of up to 16TB.  |                                                              |
-|reiserfs| Journalin and stable.|
+|  reiserfs      |  Journalin and stable.                        |                                                              |
-|btrfs |Reliable and stable| 
+|  btrfs         |  Reliable and stable                          |                                                              |
-|XFS   |Journaling, great for large files.| 
+|  XFS           |  Journaling, great for large files.           |                                                              |
-|VFAT  |Comptable with Windows, like FAT32| 
+|  VFAT          |  Comptable with Windows, like FAT32           |                                                              |
 
 # Parted
 

system/tmux.md

@@ -14,7 +14,7 @@ Input a command with C-b
 In addition to Windows, there are panes.
 
 |Commands          | Key  |
-| ---- | ---- |
+|------------------|------|
 | New Window       | c    |
 | Previous Window  | p    |
 | next window      | n    |
@@ -26,10 +26,10 @@ In addition to Windows, there are panes.
 | kill session     | d    |
 
 
-|Name Commands|
+### Name Commands
-| --------|
+
-| split-window |
+- split-window
-| rename-window |
+- rename-window
 
 # Sessions
 

virtualization/docker.md

@@ -1,21 +1,19 @@
 ---
-title: Docker
+title: Setup Docker
 tags: 
 - documentation
-- virtualization
+- setup
+- containers
 requires: 
 - system/groups.md
 ---
 
+Install docker, add your user to the docker group, and start the service.
+
 ```sh
 sudo pacman -S docker
-```
-
-```sh
 sudo usermod -aG docker $USER
-```
+sudo su $USER
-
-```sh
 sudo systemctl start docker
 ```
 
@@ -69,9 +67,9 @@ docker rm 97796727e883
 
 # Networking
 
-Get a list of docker container ips
+Get a list of docker container IPs
 
 ```sh
-docker inspect -f '{{range.NetworkSettings.Networks}}{{.IPAddress}}{{end}}' *container_name_or_id*
+docker inspect -f '{{range.NetworkSettings.Networks}}{{.IPAddress}}{{end}}' ${name}
 ```
 

virtualization/virtualbox.md

@@ -1,11 +1,12 @@
 ---
-title: virtualbox
+title: Setup Virtualbox
 tags: 
 - system
+- setup
+- virtualization
 requires: 
 - system/groups.md
 ---
-# Setup
 
 Load the modules (or just reboot):
 

vision/lowdown.md

@@ -12,14 +12,6 @@ Turn a markdown file into a pdf:
 lowdown -stms "$FILE".md | pdfroff -itk -mspdf > "$FILE".pdf
 ```
 
-*Example:* put [this Makefile](lowdown/example.txt) in a directory, rename it `Makefile`, then do:
-
-
-```sh
-make example
-make
-```
-
 To give the document a title, put that title in the metadata:
 
 ```sh

writing/ed.md

@@ -3,8 +3,13 @@ title: Ed: The Standard Editor
 tags: 
 - writing
 - guide
+- sed
+- vim
 ---
 
+Understanding `ed` will let you understand all that feels strange about the system.
+It set the standards for `sed` and `vi`.
+
 `ed` was designed for real terminals, i.e. a typewriter.
 You would type a command to the computer, and it would type out any errors.
 It would not waste paper, ink, and time by typing out `COMMAND RUN SUCCESSFULLY` after each command.
@@ -12,7 +17,6 @@ A silent machine meant a happy machine.
 
 To fully appreciate `ed`, you can slow down your terminal with the following command:
 
-
 ```sh
 ff=/tmp/bashpipe
 mkfifo $ff
@@ -24,7 +28,6 @@ Try running `dir` and `dir -F`!
 
 Okay, now onto `ed`...
 
-
 # Basic Usage
 
 Open a file:
@@ -67,11 +70,8 @@ Delete the current line:
 d
 ```
 
-
-
 Write the 'buffer' to disk:
 
-
 ```ed
 w
 ```
@@ -86,7 +86,6 @@ q
 
 Open that file:
 
-
 ```ed
 ed file.md
 ```

writing/vim.md

@@ -25,3 +25,4 @@ Keybind to exit this mode is `Ctrl+q`
 - [Completion](vim/completion.md)
 - [Window Splits](vim/windows.md)
 - [Use vim bindings in bash](vim/vim_in_bash.md)
+- [A game to learn  how to code in Vim](https://www.vim-hero.com/)

writing/vim/csv_to_md.md

@@ -0,0 +1,116 @@
+---
+title: CSV to Markdown in Vim
+tags: 
+- writing
+- vim
+- csv
+- markdown
+requires:
+- writing/vim.md
+---
+
+Open a CSV table (I made this one with `:r!sed 's/:/,/g' /etc/passwd | head`).
+
+
+```csv
+root,x,0,0,,/root,/bin/bash
+bin,x,1,1,,/,/usr/bin/nologin
+daemon,x,2,2,,/,/usr/bin/nologin
+mail,x,8,12,,/var/spool/mail,/usr/bin/nologin
+ftp,x,14,11,,/srv/ftp,/usr/bin/nologin
+http,x,33,33,,/srv/http,/usr/bin/nologin
+nobody,x,65534,65534,Nobody,/,/usr/bin/nologin
+dbus,x,81,81,System Message Bus,/,/usr/bin/nologin
+systemd-coredump,x,981,981,systemd Core Dumper,/,/usr/bin/nologin
+systemd-network,x,980,980,systemd Network Management,/,/usr/bin/nologin
+```
+
+Highlight the table.
+
+- Go to the top, with 'root'.
+- Type `V9j`.
+- `:!column -ts, -o '|'`
+- Return!
+
+
+```csv
+root            |x|0    |0    |                          |/root          |/bin/bash
+bin             |x|1    |1    |                          |/              |/usr/bin/nologin
+daemon          |x|2    |2    |                          |/              |/usr/bin/nologin
+mail            |x|8    |12   |                          |/var/spool/mail|/usr/bin/nologin
+ftp             |x|14   |11   |                          |/srv/ftp       |/usr/bin/nologin
+http            |x|33   |33   |                          |/srv/http      |/usr/bin/nologin
+nobody          |x|65534|65534|Nobody                    |/              |/usr/bin/nologin
+dbus            |x|81   |81   |System Message Bus        |/              |/usr/bin/nologin
+systemd-coredump|x|981  |981  |systemd Core Dumper       |/              |/usr/bin/nologin
+systemd-network |x|980  |980  |systemd Network Management|/              |/usr/bin/nologin
+```
+
+The command displays as `:'<,'>!column -ts, -o '|'`.
+
+This looks better, but the spacing is bad because the output separate is `-o '|'`.
+You can put spaces around that pipe by making the separator a pipe (`-s'|'`)
+and making the output separator a pipe with spaces (`-o' | '`).
+
+```vim
+:'<,'>!column -ts'|' -o ' | '
+```
+
+
+```csv
+root             | x | 0     | 0     |                            | /root           | /bin/bash
+bin              | x | 1     | 1     |                            | /               | /usr/bin/nologin
+daemon           | x | 2     | 2     |                            | /               | /usr/bin/nologin
+mail             | x | 8     | 12    |                            | /var/spool/mail | /usr/bin/nologin
+ftp              | x | 14    | 11    |                            | /srv/ftp        | /usr/bin/nologin
+http             | x | 33    | 33    |                            | /srv/http       | /usr/bin/nologin
+nobody           | x | 65534 | 65534 | Nobody                     | /               | /usr/bin/nologin
+dbus             | x | 81    | 81    | System Message Bus         | /               | /usr/bin/nologin
+systemd-coredump | x | 981   | 981   | systemd Core Dumper        | /               | /usr/bin/nologin
+systemd-network  | x | 980   | 980   | systemd Network Management | /               | /usr/bin/nologin
+```
+
+Make a header by copying the top line and replacing text (`yypkR`).
+
+That's nicer, but the formatting's wrong again.
+
+```markdown
+User             | Passwords | UID   | GID   | Description                | Home            | Shell    
+root             | x | 0     | 0     |                            | /root           | /bin/bash
+[...]
+```
+
+Time to fix it with `:'<,'>!column -ts'|' -o'|'`.
+
+
+```csv
+User              |  Passwords  |  UID    |  GID    |  Description                 |  Home             |  Shell    
+----------------- | ----------- | ------- | ------- | ---------------------------- | ----------------- | ----------
+root              |  x          |  0      |  0      |                              |  /root            |  /bin/bash
+bin               |  x          |  1      |  1      |                              |  /                |  /usr/bin/nologin
+daemon            |  x          |  2      |  2      |                              |  /                |  /usr/bin/nologin
+mail              |  x          |  8      |  12     |                              |  /var/spool/mail  |  /usr/bin/nologin
+ftp               |  x          |  14     |  11     |                              |  /srv/ftp         |  /usr/bin/nologin
+http              |  x          |  33     |  33     |                              |  /srv/http        |  /usr/bin/nologin
+nobody            |  x          |  65534  |  65534  |  Nobody                      |  /                |  /usr/bin/nologin
+dbus              |  x          |  81     |  81     |  System Message Bus          |  /                |  /usr/bin/nologin
+systemd-coredump  |  x          |  981    |  981    |  systemd Core Dumper         |  /                |  /usr/bin/nologin
+systemd-network   |  x          |  980    |  980    |  systemd Network Management  |  /                |  /usr/bin/nologin
+```
+
+Now we just need the spacer line.
+Copy the top line (`yyp`) and replace (`:s/not-pipe/-/g`).
+You can say 'not the pipe symbol' with `[^|]` or 'not-pipe-or-colon' with `[^:|]`.
+
+```vim
+:s/[^:|]/-/g
+```
+
+# Keyboard Shortcut
+
+Put this in your `~/.vimrc` to map 'Control + s' to reformat CSV while in visual mode.
+
+
+```vim
+vmap <C-s> :!column -ts, -o " \| "<Enter>yyp:s/[^\|:]/-/g<Enter>
+```

writing/vim/format_md.md

@@ -0,0 +1,82 @@
+---
+title: Reformat a Markdown Table
+tags: 
+- writing
+- vim
+- markdown
+requires:
+- writing/vim.md
+---
+
+This markdown table is badly messed up:
+
+```markdown
+| File  | Category |
+|:------|:---------|
+| calendar.md           | tex|
+| tex_packages.md           | tex|
+| completion.md           | vim|
+| csv_to_md.md           | vim|
+| format_md.md           | vim|
+
+```
+
+Highight from the top with `V6j`, then run `column` to fix the output:
+
+```vim
+:!column -ts'|' -o '|'
+```
+
+It displays like this:
+
+```vim
+:'<,'>!column -ts'|' -o '|'
+```
+
+```markdown
+| File                      | Category |
+|:------                    |:---------|
+| calendar.md               | tex      |
+| tex_packages.md           | tex      |
+| completion.md             | vim      |
+| csv_to_md.md              | vim      |
+| format_md.md              | vim      |
+
+```
+
+
+That's better, but the header is broken.
+Fix is by replacing spaces with dashes.
+
+```vim
+:s/ /-/g
+```
+
+The lines have too much whitespace.
+You can fix this with the 'truncate' command, to squeeze repeating spaces or dashes.
+
+
+```vim
+tr -s ' -' |column -ts '|' -o '|'
+```
+
+```markdown
+| File            | Category |
+|:----------------|:---------|
+| calendar.md     | tex      |
+| tex_packages.md | tex      |
+| completion.md   | vim      |
+| csv_to_md.md    | vim      |
+| format_md.md    | vim      |
+
+```
+
+# Keyboard Shortcut
+
+Put this in your `~/.vimrc` to map 'Control + t' to reformat markdown tables in visual mode.
+
+
+```vim
+vmap <C-t> :!tr -s ' -' \|column -ts '\|' -o '\|'<Enter>j:s/ /-/g<Enter>k
+```
+