Merge branch 'dev' into vhs

Makefile

@@ -38,7 +38,6 @@ $(databases): .dbs/%.rec: %/ | .dbs/
 
 # This two-variable read can only happen because of the quotes in the titles.
 db.rec: $(databases)
-	$(warning rebuilding from $? )
 	printf '%s\n' '%rec: guide' > $@
 	printf '%s\n' '%key: title' >> $@
 	printf '%s\n' '%type: requires rec guide' >> $@

README.md

@@ -44,8 +44,6 @@ They should not assume the reader knows much beyond common terminal commands, an
 People should be able to read an article from the beginning, then keep going until the end, and then stop.
 Articles should not take a detour through a chain of other articles of unknown size.
 
-[Do not Jaquays documentation](https://splint.rs/posts/no_links)
-
 ## Be Opinionated
 
 - Guides should not ask the reader to select options half-way through.

basics/at.md

@@ -64,6 +64,8 @@ atrm 2
 
 Check `/var/spool/atd/` to see the jobs.
 
+![At it again](/tapes/at.gif)
+
 ## Automation
 
 Automatically add a job for later, by setting the date, then using echo for the command.

basics/at.tape

@@ -0,0 +1,42 @@
+Require at
+Require atd
+Sleep 500ms
+Type "at teatime"
+Enter
+Sleep 1.5s
+Type "./"
+Sleep 500ms
+Type "baskup.sh"
+Sleep 1.5s
+Enter
+Sleep 1.5s
+Ctrl+D
+Sleep 3.5s
+Type "atq"
+Enter
+Sleep 1.5s
+Type "atq 1"
+Sleep 500ms
+Type "4"
+Enter
+Sleep 500ms
+Type "at"
+Sleep 1s
+Type " -c 15"
+Enter
+Sleep 1.5s
+Type "at"
+Sleep 500ms
+Type " "
+Sleep 500ms
+Type "-"
+Sleep 500ms
+Type "c 15 | grep PWD"
+Enter
+Sleep 5.5s
+Type "atrm 15"
+Sleep 2s
+Enter
+Sleep 3s
+Ctrl+D
+

basics/locating.md

@@ -13,6 +13,8 @@ type -P ls
 type -a cat
 ```
 
+![where is cmus?](/tapes/which.gif)
+
 # Whereis the Program
 
 Where is `grep` and all its configuration files?

basics/which.tape

@@ -0,0 +1,33 @@
+Require cmus
+
+Type "whereis cmus"
+Enter
+Sleep 1s
+Type "which cmus"
+Enter
+Sleep 500ms
+Type "type /bin/cmus"
+Enter
+Sleep 5s
+Type "man cmus"
+Enter
+Sleep 1s
+Type " "
+Sleep 1s
+Type " "
+Sleep 1s
+Type " "
+Sleep 500ms
+Type " "
+Sleep 1.5s
+Type " "
+Sleep 500ms
+Type " "
+Sleep 1.5s
+Type " "
+Sleep 500ms
+Type " q"
+Sleep 500ms
+Type "cmus"
+Sleep 3s
+Ctrl+D

data/git/git-lfs.md

@@ -1,7 +1,6 @@
 ---
 title: "git-lfs"
 tags: [ "data", "git" ]
-requires: [ "git" ]
 ---
 
 Git Large File Storage ('LFS') needs to change your `~/.gitconfig` to check out those binary files:

data/git/git_stash.md

@@ -1,69 +0,0 @@
----
-title: "git stash"
-tags: [ "data", "git" ]
-requires: [ "git" ]
----
-
-Save file-changes without committing anything.
-
-Change a file:
-
-```sh
-file=README.md
-fortune >> ${file}
-git diff
-git stash save
-```
-
-List which stashes you have:
-
-
-```sh
-git stash list
-
-    stash@{1}: WIP on master: c21f102 init git
-```
-
-Make a new file, then stash it:
-
-
-```sh
-otherfile=file.log
-fortune > ${otherfile}
-git add ${otherfile}
-stashname=logfile
-git stash save ${stashname}
-```
-
-Now you can see two stashed changes, and the most recent has a name:
-
-```sh
-git stash list
-
-    stash@{0}: On master: logfile
-    stash@{1}: WIP on master: c21f102 init git
-```
-
-You can delete a stash by referring to its index number, or name (if it has one).
-
-```sh
-choice=1
-git stash drop ${choice}
-
-choice=${stashname}
-git stash drop ${choice}
-```
-
-Or just run `git stash drop` to remove the most recent (labelled `{0}`).
-
-Return stashed changes with an index number (or the most recent).
-
-```sh
-git stash pop ${choice}
-```
-
-Delete all stashes:
-
-```sh
-git stash clear
-```

data/json.md

@@ -1,13 +0,0 @@
----
-title: "ijq"
-tags: [ "data", "json", "TUI" ]
----
-
-Analyse `json` easier with `ijq`.
-
-```sh
-column -J -ts: -H PW,GID,shell -N User,PW,UID,GID,Description,Home,shell /etc/passwd > host.json
-ijq !$
-```
-
-If you get stuck, try adding `.[]`.

data/recfiles.md

@@ -52,3 +52,5 @@ recset -f "$new_field" --delete $database
 
 - [Recfiles for gemini capsules](gemini://tilde.town/~dozens/gemlog/21.gmi)
 
+
+![Recfiles](/tapes/recfiles.gif)

data/recfiles/recfiles.tape

@@ -0,0 +1,68 @@
+Require recins
+
+Set Shell "bash"
+Set TypingSpeed 0.1
+Set FontSize 25
+Set Width 900
+Set Height 700
+
+Enter
+Type "touch games.rec"
+Enter
+
+Sleep 2s
+Type 'recins --record "Name: Vojvodina" games.rec'
+Enter
+Sleep 2s
+Type 'recsel games.rec'
+Enter
+
+Sleep 2s
+
+Type 'for g in Saboter Carcassonne Chess; do recins -r "Name: $g" games.rec; done'
+Enter
+Type 'recsel games.rec'
+Enter
+Sleep 2s
+Type 'cat games.rec'
+Enter
+Sleep 1s
+
+Type 'recsel --quick=Carc games.rec'
+Enter
+Type 'recsel -q Carc games.rec'
+Enter
+Sleep 2s
+
+Type 'recsel -q "sabot" --print=Name games.rec'
+Enter
+Sleep 1s
+Type 'recsel --case-insensitive -q "sabot" --print=Name games.rec'
+Enter
+Sleep 2s
+
+Type 'recsel -i -q "chess" -p Name games.rec'
+Enter
+Sleep 1s
+
+Type 'recset -f "Played" --set-add="no" games.rec'
+Enter
+Type 'recsel games.rec'
+Enter
+Sleep 1s
+
+Type 'recset -iq chess -f "Played" --set=yes games.rec'
+Enter
+Type 'recsel games.rec'
+Enter
+Sleep 1s
+
+Type 'recset -f "Played" --delete games.rec'
+Enter
+Type 'recsel games.rec'
+Enter
+
+Hide
+Type 'rm games.rec'
+Enter
+Sleep 3s

data/sc-im.md

@@ -48,6 +48,7 @@ echo 'set autowrap' >> .config/sc-im/scimrc
 |:----------------------|:---:|
 | text (left align)     | <   |
 | text (right align)    | >   |
+| text (right align)    | `|` |
 | Edit existing  text   | E   |
 
 ### Meta Actions
@@ -62,6 +63,26 @@ echo 'set autowrap' >> .config/sc-im/scimrc
 |  paste with format    | Pc  |
 |  delete a cell        | x   |
 
+# Movement
+
+| Action                          | Key |
+|:-------------------------------:|:---:|
+| highest part                    | H   |
+| lowest part                     | L   |
+| top                             | gg  |
+| move right                      | g$  |
+| move left                       |  g0 |
+| insert middle                   | \   |
+| insert left                     | \>  |
+| insert right                    | <   |
+| to to cell b4                   | b4  |
+| see all text in cells           | aa  |
+| format cells so you can see it. | f   |
+| format wider right              | fl  |
+| format smaller left             | fh  |
+| format wider down               | fj  |
+| format smaller down             | fk  |
+
 
 ### Functions
 

data/task/contexts.md

@@ -1,34 +0,0 @@
----
-title: "Taskwarrior Contexts"
-tags: [ "data", "task" ]
-requires: [ "Taskwarrior" ]
----
-
-# Contexts
-
-Set three contexts by their tags:
-
-```sh
-task context define work +sa or +hr
-```
-
-```sh
-task context define study +ed or +void or +rat
-```
-
-```sh
-task context define home -sa -hr -ed -void -rat
-```
-
-Change to the first context.
-
-```sh
-task context work
-```
-
-Then stop.
-
-```sh
-task context none
-```
-

data/task/taskwarrior_configuration.md

@@ -1,20 +0,0 @@
----
-title: "Taskwarrior Configuration"
-tags: [ "data", "task" ]
-requires: [ "Taskwarrior" ]
----
-
-Show your current config:
-
-
-```sh
-task show
-```
-
-Use machine-readable output to make a config file with all configuration keys shown, then make it your configuration file.
-
-```sh
-task _show > ${file}
-mv ${file} ~/.config/task/taskrc
-```
-

data/taskwarrior/task.md

@@ -1,6 +1,6 @@
 ---
-title: "Taskwarrior"
-tags: [ "data", "organization" ]
+title: "task"
+tags: [ "organization" ]
 ---
 
 Set up the configuration file:
@@ -9,18 +9,6 @@ Set up the configuration file:
 task
 ```
 
-Taskwarrior published a new feature to synchronize tasks others, but the feature was not ready.
-The server's default installation instructions assume that users pay for hosting services.
-All listed providers run proprietary software and actively support genocide.
-
-
-To ignore the synchronization, tell the configuration file to use a local synchronization file.
-
-```
-task config sync.local.server_dir
-task config data.location ~/.local/state/
-```
-
 Add a task:
 
 ```sh
@@ -56,16 +44,18 @@ task add project:house buy potted plant
 task add proj:house.repair buy screwdriver
 task add proj:house.repair buy shelf brackets
 task add pro:house.paint buy white paint
-
-for t in "buy red paint" "buy black paint" "buy brushes" ; do
-  task add pro:house.paint $t
-done
+task add pro:house.paint buy red paint
+task add pro:house.paint buy black paint
+task add pro:house.paint buy brushes
 ```
 
 ## Summary
 
 ```sh
 task pro:house sum
+```
+
+```sh
 task burndown.daily pro:house
 ```
 
@@ -73,12 +63,44 @@ The summaries will show how fast a project is being completed, and when you can
 
 # Tags
 
-
 ```sh
 task add +buy toothbrush
+```
+
+You can then see only tasks which involve buying something with:
+
+```sh
 task +buy
 ```
 
+# Contexts
+
+Set three contexts by their tags:
+
+```sh
+task context define work +sa or +hr
+```
+
+```sh
+task context define study +ed or +void or +rat
+```
+
+```sh
+task context define home -sa -hr -ed -void -rat
+```
+
+Change to the first context.
+
+```sh
+task context work
+```
+
+Then stop.
+
+```sh
+task context none
+```
+
 # Review
 
 View list of tasks completed in the last week:
@@ -89,17 +111,21 @@ task end.after:today-1wk completed
 
 # User Defined Attributes
 
-Define a new attribute for tasks called 'size'.
-The 'user defined attribute' (UDA) needs a `type` and `label`.
+Make a UDA 'size'.
 
 ```sh
 task config uda.size.type string
+```
+
+```sh
 task config uda.size.label Size
 ```
-You can also ensure task tasks can only be `large`, `medium`, or `small`, then set a default.
 
 ```sh
 task config uda.size.values large,medium,small
+```
+
+```sh
 uda.size.default=medium
 ```
 

data/w3m.md

@@ -19,3 +19,4 @@ w3m ddg.gg
 | T        | new tab              |
 | { / }    | switch tabs          |
 
+![w3m browser](/tapes/w3m.gif)

data/w3m.tape

@@ -0,0 +1,43 @@
+Require w3m
+
+Sleep 1s
+Type "w3m ddg.gg"
+Sleep 500ms
+Enter
+Sleep 1.5s
+Tab
+Enter
+Type "cats"
+Enter
+Sleep 2s
+Tab
+Enter
+Sleep 2s
+Type "jjjjjjjjjjjj"
+Tab
+Enter
+Sleep 2s
+Type "U"
+Sleep 500ms
+Ctrl+U
+Sleep 500ms
+Type "dmz.rs"
+Sleep 500ms
+Enter
+Sleep 4.5s
+Type "jjjjjjjj"
+Tab
+Type "j"
+Sleep 500ms
+Enter
+Sleep 1s
+Type " "
+Sleep 2s
+Backspace
+Sleep 500ms
+Type " "
+Sleep 1.5s
+Type " "
+Sleep 2s
+Type "qy"
+Sleep 500ms

distros/void/xbps-install.tape

@@ -0,0 +1,28 @@
+Require xbps-query
+Require xbps-install
+
+Set Shell "bash"
+Set FontSize 20
+Set Width 1400
+Set Height 900
+
+Type "sudo xbps-install --sync" Enter Sleep 700ms  Enter
+
+Type "sudo xbps-install --update --yes" Sleep 700ms
+
+Backspace 33
+
+Type "echo same but faster!" Sleep 200ms  Enter
+
+Type "sudo xbps-install -uy" Enter Sleep 700ms
+
+Type "echo now we just download" Sleep 2s  Enter
+
+Type "sudo xbps-install -SD --yes" Sleep 700ms Enter 
+
+Type "echo and install from the downloaded updates..." Sleep 2s  Enter
+
+Type "sudo xbps-install -Du" Sleep 700ms Enter 
+
+Sleep 4s
+

distros/void/xbps-query.tape

@@ -0,0 +1,64 @@
+Require xbps-query
+Require xbps-install
+
+Set Shell "bash"
+#Set FontSize 20
+#Set Width 1400
+#Set Height 900
+
+#Hide 
+#
+#Type "sudo xbps-remove -y cowsay xcowsay aerc"
+
+Show
+
+Type "xbps-query cows" Enter Sleep 1s
+
+Type "nothing..."
+
+Backspace 11
+
+Type "xbps-query --search cows" Sleep 500ms  Enter
+
+Type "xbps-query --repository --search cows" Sleep 500ms  Enter
+
+Type "echo same but faster!" Sleep 200ms  Enter
+
+Type "xbps-query -Rs cows" Sleep 500ms  Enter
+
+Sleep 3s
+
+Type "sudo xbps-install -y xcowsay" Enter Sleep 700ms  Enter
+
+Sleep 5
+
+Type "xbps-query --repository --search 'email'" Sleep 300ms Enter
+
+Type "too much...." Sleep 1s
+
+Backspace 13
+
+Sleep 1s
+
+Type "xbps-query -R --search '^email'" Sleep 300ms Enter
+
+Sleep 2s
+
+Type "xbps-query -Rs --regex '^email terminal'" Sleep 300ms Enter
+
+Type "???" Sleep 2s
+
+Backspace 3
+
+Sleep 3s
+
+Type "regex first!" Sleep 2s
+
+Backspace 12
+
+Type "xbps-query --regex -Rs '^email.*terminal'" Sleep 300ms Enter Sleep 900ms
+
+Type "xbps-query --regex -Rs '^terminal.*email'" Sleep 300ms Enter Sleep 900ms
+
+Type "sudo xbps-install aerc" Enter Sleep 300ms Enter Sleep 2s
+

distros/void/xbps-remove.tape

@@ -0,0 +1,28 @@
+Require xbps-query
+Require xbps-install
+
+Set Shell "bash"
+#Set FontSize 20
+#Set Width 1400
+#Set Height 900
+
+Type "sudo xbps-remove --yes thunderbird" Enter Sleep 2s
+
+Type "time to kill orphans" Sleep 600ms
+
+Backspace 21
+
+Enter
+
+Type "xbps-remove --remove-orphans --dry-run" Sleep 700ms 
+
+Backspace 38
+
+Enter
+
+Type "xbps-remove -on | cowsay" Sleep 300ms Enter Sleep 1.5s
+
+Type "sudo xbps-remove --yes -o" Sleep 700ms Enter
+
+Sleep 2s
+

distros/void/xbps.md

@@ -22,6 +22,8 @@ Search with regex:
 xbps-query --regex -Rs 'cow(s)?\w'
 ```
 
+![xbps searches](/tapes/xbps-query.gif)
+
 List what's required for cowsay
 
 ```bash
@@ -68,6 +70,8 @@ Upgrade current packages.
 xbps-install -Suv
 ```
 
+![xbps searches](/tapes/xbps-install.gif)
+
 ## Remove/ Uninstall
 
 Remove cowsay
@@ -90,6 +94,8 @@ xbps-remove -o
 
 Show information about cowsay
 
+![xbps searches](/tapes/xbps-remove.gif)
+
 ## Fixes
 
 Reinstall cowsay

networking/port_scan.md

@@ -1,25 +0,0 @@
----
-title: "Port Scan"
-tags: [ "networking" ]
-repo: 'https://github.com/mrjackwills/havn/'
----
-
-`havn` scans ports.
-It's not in many repos, but if you can `cargo install havn`.
-
-
-```sh
-havn -h
-havn -a
-domain=splint.rs
-havn -p 19-90 ${domain}
-```
-
-That last command doesn't work reliably, so increase the number of retries (`-r`), or decrease concurrent requests (`-c`).
-
-
-```sh
-havn -p 19-443 -r 6 ${domain}
-havn -p 1-1000 -c 500 -r 5 ${domain}
-```
-

system/Makefiles/patterns.md

@@ -1,3 +1,4 @@
+
 ---
 title: "Makefile Patterns"
 tags: [ "system", "make" ]

system/ansible/ansible_with_docker.md

@@ -1,114 +0,0 @@
----
-title: "Ansible with Docker"
-tags: [ "system", "ansible", "docker" ]
-requires: [ "Docker" ]
----
-
-Set up two containers: `deb` and `arch`, add them to an `ansible` hosts file, then do a 'ping' to see if they respond.
-
-## Required Packages
-
-- `ansible`
-- `jq`
-- `docker`
-
-## Debian Container
-
-```sh
-docker run -di --rm --name deb --hostname deb debian
-docker exec -it deb sh -c 'apt update && apt -y install openssh-server python3 sudo'
-```
-
-Generate the host's ssh keys, then start the ssh daemon:
-
-```sh
-docker exec -it deb sh -c 'ssh-keygen -A'
-docker exec -d deb /usr/sbin/sshd -D
-```
-
-## Arch Linux Container
-
-```sh
-docker run -di --rm --name arch --hostname arch archlinux
-docker exec -it arch sh -c 'pacman -Syu --noconfirm python sudo openssh'
-docker exec -it arch sh -c 'ssh-keygen -A'
-docker exec -d arch /usr/sbin/sshd -D
-```
-
-## `ssh` Keys
-
-Copy across your public ssh key to the container's `authorized_keys` file:
-
-```sh
-pubkey=~/.ssh/id_rsa.pub
-for hostname in arch deb; do
-    docker cp $pubkey $hostname:/root/.ssh/authorized_keys
-    docker exec -it $hostname sh -c "chown -R root:root /root/.ssh/"
-    docker exec -it $hostname sh -c "chmod -R 700 /root/.ssh/"
-done
-```
-
-## Hosts File
-
-Find name of containers' IPv4 addresses.
-
-```sh
-docker network inspect bridge
-```
-
-The output is awful.
-Use `jq` to parse the `json`:
-
-```sh
-docker network inspect bridge  | jq -r '.[].Containers | .[].IPv4Address'
-```
-
-Now put those into a host file:
-
-```sh
-docker_hosts=hosts.txt
-echo '[containers]' > $docker_hosts
-
-docker network inspect bridge  | \
-    jq -r '.[].Containers | .[] | "root@" + .IPv4Address' | \
-    cut -d/ -f1 >> $docker_hosts
-```
-
-You may need to add those host keys to your known hosts file.
-Either connect interactively, or (for scripts):
-
-```sh
-hosts="$(docker network inspect bridge  | jq -r '.[].Containers | .[] | .Name + " " + .IPv4Address' | \
-    cut -d/ -f1)"
-
-echo "$hosts"
-
-echo "$hosts" | while read hostname ip; do
-    printf "%s" "$ip"
-    key="$(docker exec $hostname cat /etc/ssh/ssh_host_ed25519_key.pub)"
-    echo "$ip $key" >> ~/.ssh/known_hosts
-done
-```
-
-Check if they ping:
-
-```sh
-ansible -i $docker_hosts all -m ping
-```
-
-This command produces an irritating warning about the python interpreter (i.e., `python3`).
-
-Make the warning shut-up:
-
-```sh
-echo '
-[containers:vars]
-ansible_python_interpreter=/usr/bin/python3.13' >> $docker_hosts
-```
-
-Now the ping is cleaner:
-
-```sh
-ansible -i $docker_hosts all -m ping
-```
-

system/lf.md

@@ -3,6 +3,8 @@ title: "lf - The Light File Manager"
 tags: [ "file browser", "TUI" ]
 ---
 
+![lf](/tapes/lf.gif)
+
 ## Config File
 
 If you don't have a `~/.config/lf/lfrc` file, you can probably find an example in `/usr/share/examples/lf`.

system/lf.tape

@@ -0,0 +1,24 @@
+Require lf
+
+Set Shell "bash"
+Set FontSize 12
+Set Width 800
+Set Height 600
+
+Type "lf"
+Sleep 1.5s
+Enter
+Sleep 1.5s
+Type "jjj"
+Sleep 1s
+Enter
+Sleep 2s
+Type "fortune > file"
+Enter
+Sleep 2s
+Enter
+Type "/file"
+Enter
+Sleep 3s
+Type "q"
+

system/makefiles/python_projects.md

@@ -1,98 +0,0 @@
----
-title: "Python Projects with Makefiles"
-tags: [ "tutorial", "system", "makefiles", "graphviz", "python" ]
-requires: [ "Makefiles" ]
----
-
-If you have a python script which requires a packages - e.g. `graphviz` - you can automate the setup with a `Makefile`.
-The `Makefile` will:
-
-1. Make three copies of an 8-line installer script.
-2. Use one of the installer script to install local packages.
-3. Install a symbolic link to python.
-3. Make a script called `activate`, which tells python to use 
-
-# Context
-
-Python coders don't like updating their projects, they just expect everyone to install the same version of everything that they have.
-Historically, people dealt with this by installing only half a dozen copies of `graphviz`; but now each python project uses a local environment, with a local copy of `graphviz`, which means everyone gets to install a new copy of `graphviz` every time they try out a project.
-
-Downloading 40MB of software for each 40-line script you write is called 'virtual environments' because it sounds cool.
-We can make it even cooler with `make`, but not yet, because python - like the fae of old - will not fetch anything until you know its true name.
-
-# Setup
-
-```sh
-command -v python
-realpath `!!`
-```
-
-You must reveal that true path, because `python` is always a relative symbolic link, to an absolute symbolic link, which leads to a shortcut.
-We can finally let `make` know how to invoke python, and where it will install `graphviz`.
-
-If your python's version is '3.14', then python needs its packages placed in `${somewhere}/lib/python3.14/site-packages/`.
-You must create a new, local, name for these packages, because - like the fey of old - python demands a private name in return for revealing its true name.
-
-I'll call mine `camelot`, because the path is long and arduous.
-Set up the Makefiles like this:
-
-```make
-py_link != command -v python
-py != realpath $(py_link)
-version != basename $(py)
-
-virtenv = camelot
-```
-
-Now you can ask for a local `pip` script, which can install the python packages:
-
-```make
-    [...]
-
-$(virtenv)/bin/pip:
-    $(py) -m venv $(virtenv)
-```
-
-Finally, list the packages you want in `requirements.txt`, and make `pip` install from it.
-
-
-```sh
-ppkg=graphviz
-echo ${ppkg} > requirements.txt
-```
-
-```make
-    [...]
-
-pkgs = $(virtenv)/lib/$(version)/site-packages/
-
-$(pkgs): $(virtenv)/bin/pip
-$(pkgs): requirements.txt
-    $(virtenv)/bin/pip install -r $<
-```
-
-The complete Makefile looks like this:
-
-
-```make
-all: .default
-
-py_link != command -v python
-py != realpath $(py_link)
-version != basename $(py)
-
-virtenv = camelot
-
-$(virtenv)/bin/pip:
-    $(py) -m venv $(virtenv)
-
-pkgs = $(virtenv)/lib/$(version)/site-packages/
-
-$(pkgs): $(virtenv)/bin/pip
-$(pkgs): requirements.txt
-    $(virtenv)/bin/pip install -r $<
-
-.PHONY: .default
-.default: $(pkgs)
-```
-

system/managing_groups.md

@@ -17,10 +17,10 @@ Remove yourself from all groups, and add yourself back to only `wheel`, `audio`,
 sudo usermod --groups wheel,audio,$USER
 ```
 
-Add yourself to the `docker` group:
+Add yourself to the `wheel` group:
 
 ```sh
-su root -c "usermod --append --groups docker $USER"
+su root -c "usermod --append --groups wheel $USER"
 ```
 Add yourself to the `network` group:
 
@@ -28,11 +28,5 @@ Add yourself to the `network` group:
 sudo usermod -aG network $USER
 ```
 
-The changes have not taken effect, so log into your own account again with `su`:
+The changes will not take effect until you log in again, so reboot or log into `localhost` with [ssh](../networking/ssh.md).
 
-
-```sh
-groups
-sudo su $USER
-groups
-```

virtualization/docker.md

@@ -1,7 +1,6 @@
 ---
 title: "Docker"
 tags: [ "documentation", "virtualization" ]
-requires: [ "Managing Groups" ]
 ---
 ```sh
 sudo pacman -S docker

vision/ffmpeg.md

@@ -31,7 +31,6 @@ ffmpeg -f x11grab -s "$(xdpyinfo | grep dimensions | awk '{print $2}')" -i :1.0
 ```
 
 #Add default pulse audio
-
 ```bash
 ffmpeg -f x11grab -s [screensize] -i :0.0 -f alsa -i default out.mkv
 ```

vision/make_a_gif.md

@@ -1,22 +0,0 @@
----
-title: "Make a gif"
-tags: [ "vision" ]
----
-
-Split your video into frames.
-
-```sh
-d=$(mktemp -d)
-cp $vid.mp4 $d
-cd $d
-
-ffmpeg -i $vid.mp4 -vf "fps=10, scale=360:-1" frame%04d.png
-gifski --fps 10 -o ${out}.gif frame*.png
-```
-
-Optimize:
-
-```sh
-gifsicle --optimize=3 --lossy=100 -o ${final}.gif ${out}.gif
-```
-

writing/latex_setup.md

@@ -1,5 +1,5 @@
 ---
-title: "LaTeX Packages"
+title: "LaTeX Setup the Hard Way"
 tags: [ "writing" ]
 ---
 
@@ -21,7 +21,7 @@ ls /opt/texlive/${YEAR}/texmf-dist/scripts/texlive/tlmgr.pl
 ```
 
 Double-check the year.
-It should *not* match the current year, it should match the `texlive`.
+It should *not* match the real year, it should match the `texlive`.
 
 ## Problems along the Path
 

writing/tex/calendar.md

@@ -1,12 +0,0 @@
----
-title: "Calendar"
-tags: [ "writing", "tex", "fun" ]
-requires: [ "LaTeX Packages" ]
----
-
-```sh
-yplan $(date +%Y) > ${file}.tex
-pdflatex -output-directory=/tmp/ ${file}.tex
-mv /tmp/${file}.pdf .
-```
-

writing/vim.md

@@ -3,14 +3,13 @@ title: "vim basics"
 tags: [ "vim", "basic" ]
 ---
 
-1. Insert text by pressing `a`.
+1. Insert text by pressing `i`.
 1. Stop inserting text by pressing `Ctrl+[`.
 1. Exit with `ZZ`.
 1. Congratulations, you now know `vim`.
 
 ## Extras
 
-- [Learning Vim](vim/vi.md)
 - [Navigation](vim/navigate.md)
 - [Completion](vim/completion.md)
 - [Search](vim/search.md)

writing/vim/vi.md

@@ -1,46 +0,0 @@
----
-title: "How to Learn `vim`"
-tags: [ "vim", "learning" ]
-requires: [ "vim basics" ]
----
-
-1. Uninstall `vim`.
-1. Install `vi`.
-1. Write a few blog posts.
-
-The [ancient wisdom](https://stackoverflow.com/questions/1218390/what-is-your-most-productive-shortcut-with-vim/1220118#1220118) is correct - everyone should start with `vi`.
-But the standard wisdom fails to mention writing.
-So people just 'try to remember', then they edit a couple of configuration files with `vim`, then stop, because it's a pain to think about keystrokes while thinking about how the configuration file works.
-Nobody can learn like that.
-
-Learn with a blog, or writing emails in `vim`, or writing anything, as long as it's *real writing*.
-Write a journal or some recipes.
-Write literally anything which is written in paragraphs.
-
-And while you're writing, remember one rule: if you want something, `vi` can do it, you just need to look up how.
-
-Blog first, then try out some of these commands:
-
-- `hjkl`
-- `x`
-- `:!grep very %`
-- `onew line<Esc>...`
-- `Onew line<Esc>...`
-- `~`
-- `~~~~`
-- `$r!`
-- `w %-2`
-- `x!`
-- `0RTipex`
-- `_4rX`
-- `bc2e`
-- `c2E`
-- `cw`
-- `cW`
-- `ci'`
-- `zz`
-- `:set number`
-- `:set nonumber`
-- `:set relativenumber`
-- `:set number relativenumber`
-